Description

Neuson 1502 RD Force 2004 Parts Catalog

Running a shop means dealing with parts orders that come back wrong. That gets expensive quick. If you’re working on a Neuson 1502 RD Force 2004 Parts Catalog crawler excavator and you don’t have the factory parts book, you’re guessing part numbers. I’ve watched a guy match a valve by thread pitch and get the wrong port configuration. Waste of a week. This 97-page catalog from 2004 is the only reference that lists every OEM number for the 1502 RD Force. It’s the same book the dealer uses, except you get it without the markup.

What This Parts Catalog Actually Contains

Two main sections. Section A is “ALLGEMEINE INFORMATIONEN” – general info. That includes the model designation, valid serial number range (1339000/1998), and edition date (1.0 / Dec 2004). Section B is the “TEILESUCHLISTE” – the parts number reference list. That’s where you’ll find every part with its position number (Pos), article number (Art.-Nr.), quantity (Q’TY), and the name in German, English, and French. On page 4 you get the annotation codes explained. Those codes tell you if a part is interchangeable or not. That’s stuff you can’t get from a third-party database.

3 Annotation Codes You Must Understand

Look at the example on page 4 of the catalog. You’ll see symbols like A<->N, A=>N, A#N. A<->N means old and new parts are interchangeable both ways. A=>N means the old part can be replaced by the new one, but not the reverse. A#N means they are not interchangeable. If you ignore these, you could order a part that doesn’t fit your machine’s serial number range. The catalog also uses E: for valid from serial number, A: for valid until. Get it wrong and the part won’t line up.

Model Identification: Serial Number and Edition

The catalog is specific to the Neuson 1502 RD Force crawler excavator. On the first page it lists the vehicle model and the starting serial number: 1339000/1998. That means this edition covers machines built from that serial number onward. The edition date is December 2004, so it includes any updates up to that point. If your machine’s PIN falls outside that range, you need a different catalog. The part numbers themselves reference the exact OEM components – hydraulic valves, undercarriage parts, engine components – all with the original Neuson numbers.

Does This Catalog Cover Your Machine?

This is for owners and mechanics who work on the 1502 RD Force model. If you have a 1402, 1902, or 2202 RD Force, you need the separate service manual Neuson 1402 1502 1902 2202 RD Force Service Manual for procedures. For parts on those other models, get the corresponding parts catalog. This manual assumes you already have the machine’s serial number handy. Write it down, check against the range on page 1. If you’re ordering parts for a rental fleet or your own excavator, this catalog saves you from cross-referencing vague aftermarket lists. The OEM part numbers are directly from Neuson Baumaschinen GmbH – no reprints, no copy.

Factory Documentation vs Aftermarket Lists

Aftermarket parts catalogs often omit the annotation codes, or they combine part numbers from different serial number ranges. That leads to returns. The factory catalog on page 4 shows the exact format: Pos, Art.-Nr., Anm., Q’TY, and the part name in three languages. The annotation column is critical. For example, if the column says “A: AA00733V A<->N 1,00 ST”, you know that part number 1408410 is interchangeable with the later version. Without that, you could order the wrong revision. This is why I tell every tech: don’t trust a PDF from a forum. Use the Neuson 1502 RD Force Crawler Excavator Parts Catalog from the original factory source.

Another thing: the catalog includes the “LISTE DES RECHERCHE DES PIÈCES” in French, which is valuable if you’re dealing with Canadian or European distributors. The part numbers are identical across languages. No translation errors.

Who Should Buy This

If you own a Neuson 1502 RD Force crawler excavator, or you’re a mechanic who works on them, you need this. Dealers charge a couple hundred for a printed copy. Here you get the exact same 97-page PDF. It’s searchable, printable, and you can take it to the job site on a tablet. Also check the Neuson 1502 RD Force 2006 Parts Catalog – Factory OEM Manual if your machine is a later production year. Different edition, different part supersessions.

What is the difference between A<->N and A=>N?

A<->N means interchange both ways. A=>N means only old to new, not reverse.

How do I order parts using this catalog?

First, locate your machine’s serial number. Then find the relevant section in the parts number reference list. Write down the article number (Art.-Nr.) and check the annotation column for any restrictions. Provide your dealer with the model, serial number, catalog page, position number, and article number. The catalog lists all this. If a part shows “XX” in the annotation column, it’s not available separately – you need the assembly. Also note that quantities in the Q’TY column are per assembly, not per machine. For example, if a part is used 4 times on the same assembly, Q’TY shows 4. You’ll need to multiply if you have multiple assemblies. The factory annotations also include service news references like KDN 17/00, which indicates a service bulletin. Check those before ordering to see if a superseded part is recommended.

You need the factory data. Get the 2004 Neuson 1502 RD Force Parts Catalog and stop guessing. Neuson 1502 RD Force Crawler Excavator Parts Catalog is available. Access the Factory Manual. For a broader context on why OEM documentation matters, read Automotive Industry Overview and Automotive Industry Overview.