Description

Michigan 310 III-H Parts Catalog – Factory OEM Parts Breakdown

If you’re ordering parts for a Michigan 310 III-H tractor scraper without this catalog, you’re burning money. Plain and simple. I’ve seen guys guess at part numbers and end up with a brake slack adjuster that doesn’t fit because they didn’t know the serial number cutoff. This is the original Clark Equipment Parts Catalog – not some scanned reprint from a third party. 104 pages of factory exploded views and part numbers. No guessing.

Brake System Breakdown – Find the Right Slack Adjuster Every Time

Brake parts are where most people screw up. The brake assembly – front brake, air chamber, slack adjuster – they all have specific variations. Page 50 spells out the Brake Slack Adjuster and Brake Air Chamber with exact part numbers. The Air Brake Valve on page 53? Same deal. You get the factory diagram showing each bolt and seal. No generic “brake kit” that may or may not match. If you’ve ever fought with an air brake valve that leaked because the rebuild kit was wrong, you’ll appreciate having the OEM reference.

Hydraulic System – Main and Steering Sections

This catalog splits the hydraulics into two separate sections: Hydraulic System – Main (page 69) and Hydraulic System – Steering (page 65). That’s deliberate. The main pump (page 72) and steer pump (page 66) are different beasts. The valve assemblies – Main Control Valve (page 79) and Cockpit Hydraulic Shift Control Valve (page 35) – have their own breakdowns. I’ve worked on enough Michigans to tell you: mixing up steer and main pump parts will leave you down for a week. The catalog keeps them sorted.

Transmission and Torque Converter Parts – Clutch Groups and Housings

Transmission work on a 310 III-H requires knowing exactly which clutch group you’re in. The catalog dedicates pages to First and Second Clutch Group (page 26), Input Clutch Group (page 25), and even the Idler Shaft Group (page 18). The Torque Converter Assembly (page 39) and Converter Charging Pump (page 40) are covered separately. Need the transmission control cover assembly? Page 33. It’s all there, with exploded views that show how the snap rings and seals stack. Aftermarket manuals blur these details. This one doesn’t.

Does This Manual Cover the Engine and Accessories?

Yes – but only the tractor section. The Engine and Accessories section starts on page 1, covering the fan, hourmeter, oil pressure sender, temperature gauge, and support bracket. The fuel system (tank, lines, filler cap) and battery compartment are grouped together on page 9. If you’re looking for the scraper body, rear axle, or elevator – those are not in this manual. This is strictly the tractor section for serial numbers 7VGH101 through 7VGH999. Check your machine’s serial plate before ordering. A parts catalog won’t help if you’re digging through the wrong section.

3 Reasons to Choose the OEM Parts Catalog Over Aftermarket

First, the part numbers are verified by Clark Equipment – not reverse-engineered. Second, the exploded views show the assembly order, which helps you understand how parts relate even if you’re not pulling wrenches. Third, the serial number range is clearly stated on page 1. Aftermarket parts lists often combine multiple model variants into one generic chart. That’s how you end up with a bell crank that doesn’t line up. Stick with the original.

If you’re working on other Michigan equipment, check out the VOLVO BM 125C Wheel Loader Parts Catalog for similar construction machinery, or the Michigan 851 Parts Catalog – 72-Page Factory Parts Manual for a smaller machine. The Michigan 85III 1965 Parts Catalog – Factory OEM Parts Breakdown is another solid reference for older gear. For background on how OEM parts catalogs integrate with manufacturing standards, see the Automotive Industry Overview – though construction equipment uses heavier parts, the same traceability applies.

Frequently Asked Questions

What serial numbers does this parts catalog cover?

Machine serial numbers 7VGH101 through 7VGH999. Check your tractor section serial plate before ordering. Later machines with BVGH prefix use supplements at the rear of the manual.

Does the catalog include the scraper body or elevator parts?

No. This parts manual covers only the tractor section of the Michigan 310 III-H. The scraper body, rear axle, elevator, bowl cylinder, strike-off blade, and main cutting edge are not included. If you need scraper parts, you’ll want the separate Hancock scraper manual. Using this catalog for scraper components will give you wrong part numbers and wasted time. The manual itself states on page 2 that it covers only the Tractor Section.

Are torque specs or service procedures included?

No. This is a parts catalog, not a service manual. It provides part numbers and exploded views only. Look for the separate service manual if you need torque values or repair steps.

How do I order parts using this manual?

Locate the part number from the exploded view, then contact your Michigan distributor with the machine serial number, quantity, part number, and description. Always verify the part against the diagram before ordering.

You need the right parts the first time. Don’t rely on generic online listings that mash together ten different models. This catalog – the original Clark Equipment print – gives you the exact breakdown for your 310 III-H. Access the Factory Manual now and keep it in your toolbox next to the torque wrench.