Description

Massey Ferguson 7200, 8200 2007 Parts Catalog

I’ve seen too many guys order a cutterbar knife section from aftermarket catalogs only to find the bolt pattern doesn’t match. That’s billable time down the drain. This Massey Ferguson 7200, 8200 2007 Parts Catalog is the factory-issued document, printed in 2007, running 282 pages. It’s what the dealer parts counter pulls up when you read them a serial number. No reprints, no third-party interpretation – just original Massey Ferguson data for the 7200 and 8200 grain headers.

Table of Contents: What You Get

Flip to page 3 and the table of contents lays out every section. You get exploded-view illustrations with circled part numbers, item lists, and cross-references. The publication form number is 700728793C, and the last illustration page is 288. That means every nut, bolt, and hydraulic fitting is pictured and numbered. You don’t guess – you match the diagram to the part in your hand. Need a new feeder chain sprocket? Look up the section, find the illustration, note the part number, and order it. Done.

Why OEM Parts Catalog Over Aftermarket

Aftermarket catalogs often combine multiple years or swap illustrations. That’s fine if you like returning parts twice. Massey Ferguson doesn’t play that. This catalog uses the same numbering system as the factory assembly line. If the part was superseded, the catalog notes it. If a revision changed a fastener length, the new number is right there. I’ve had to drill out a stripped bolt because an aftermarket book listed the wrong thread pitch. That doesn’t happen with this document. For more on why factory specs matter in heavy equipment, see Automotive Industry Overview. It’s the same principle: manufacture-controlled data vs. aggregated guesswork.

Who Needs This 282-Page Factory Manual

If you own a 7200 or 8200 grain header, you need this. Period. The combine header is the first point of failure in a harvest – one wrong wear-plate part and you’re down for hours. This catalog covers every version of those headers sold in North America through 2007. Whether you’re a farmer doing your own repairs, a shop tech, or a dealer parts manager, the exploded views save you from measuring and guessing. The publication date is October 2007, so it includes late-model updates. Pair it with the service manual for torque specs, but for ordering, this is the only source.

Using the Publication Information

Page 2 of the catalog lists publication information: form number 700728793C, date October 2007, last illustration page 288. That tells you it’s the official release. No reprints, no scanned copies with missing pages. The TOC starts on page 3, and the structure is consistent across all sections. When you search for a part, you work through the table of contents, locate the illustration group, then find the part number in the adjacent parts list. Each line includes the part number, description, quantities used, and any supersession notes. It’s dense but precise.

Parts from the Catalog on the Bench

I had a guy come in with a 2007 8200 header that was missing the auger bearing assembly. The aftermarket book said “use 00912345.” He ordered it – wrong shaft diameter. I pulled up the factory catalog, found the exploded view for the feeder house, and the correct part was 00728793. That part number is right in the catalog’s header. That’s the difference. For other Massey models, check the Massey-ferguson MF300 Parts Catalog – 607 Pages – Factory OEM or the Massey-Ferguson MF500 1977 Parts Catalog – 517 Pages Factory OEM. If you need the larger MF 500 B series, there’s Massey-ferguson MF 500 B 1973 Parts Catalog – Factory OEM. All factory originals.

Pair this catalog with a good service manual and you’ve got the full picture. The Automotive Industry Overview gives broader context, but for getting the right part the first time, nothing beats the factory parts catalog.

FAQ

Does this catalog include assembly instructions?

No. It’s a parts catalog, not a service manual.

How do I decipher the part numbers in the illustrations?

Each exploded view has a circled number keyed to the parts list on the same page or facing page. The list gives the part number, description, quantity, and any notes. The table of contents helps you find the right illustration group. For example, any part starting with “007” is from the original Massey Ferguson numbering. Superseded parts are listed with a note and the new number. There’s no cross-referencing to other brands – it’s pure Massey. If you have a serial number range not covered, check the publication date (2007) – it includes all headers built through that year. For headers after 2007, you’d need a later supplement.

Stop wasting money on the wrong parts. Get the factory document that parts departments trust. Access the Factory Manual and keep the harvest running.