Description

Manitou TMP55, TMP55HT, TMV50, TMV50HT, TMV55 Operators Manual

Listen, if you own or operate a Manitou rough terrain forklift, the first thing you need on the machine is the factory operator manual. This 82-page OEM document from Manitou North America is what keeps operators safe and machines running. I’ve seen guys skip reading it and bend forks or overload the mast. This manual covers the Manitou TMP55, TMP55HT, TMV50, TMV50HT, and TMV55 Operators Manual with Tier 2 engines and vertical lift mast. It must stay on the lift truck per the manufacturer’s own notice.

I’ll tell you right now: the most important warning in this manual is on page 1. It states the specially designed forks must be replaced with Factory Approved Forks only. Contact your dealer or Manitou North America. Aftermarket forks from a different brand can fail under load. Don’t risk a rollover or dropped load. That page also lists contact numbers for parts orders – 800-425-3727 – and the Waco, TX headquarters address.

Safety Standards and Decal Placement

You’ll find a dedicated safety section starting with “INTRODUCTION TO SAFETY” on page 5. It covers rough terrain forklift general safety standards, safety messages, and safety decal locations. The decal placement diagrams are critical for OSHA compliance. If you’re running a shop, you need this to train operators and avoid liability. The manual explicitly says “Study the entire manual before operating the lift truck!” – that’s not a suggestion.

Does This Operators Manual Include Service Procedures?

No. This is an operator / service manual, not a full repair manual. It covers daily operation, pre-start checks, proper loading, and basic maintenance like fluid levels and tire pressures. For engine overhaul or transmission rebuild, you need the separate service manual. But for safe operation and routine maintenance, this is the document you must have within arm’s reach on the forklift.

82 Pages of Factory Documentation

The table of contents lists sections numbered sec 1, sec 2, sec 3, plus the safety standards appendix. Each page is OEM material – not a reprint or third-party copy. You get the exact specs Manitou intended for the TMP55, TMP55HT, TMV50, TMV50HT, and TMV55. The serial number breakpoints are listed: TMP55/SN: 751884, 75549 & above; TMV50/SN: 751548 & above. If your machine falls within those ranges, this manual matches.

TMP55/HT and TMV50/55/HT: What’s Covered

This manual covers both standard and high-tilt models. The TMP55HT, TMV50HT, and TMV55HT variants have identical operator procedures but may differ in mast geometry. The manual treats them as one family, so you won’t miss a critical spec. Wheel lug torque? It’s in the specifications – you’ll need to reference the service manual for exact values, but the operator manual gives fluid capacities and recommended lubricants.

For engine-specific repair, consider the K-D Manitou D 2876 LE 401-405 Operators Manual – OEM Marine Diesel. That covers the diesel engine used in these models in more depth. Similarly, the K-D Manitou D 2866 TUE Operators Manual – Factory Specs & Procedures is useful if your machine has that powerplant. And for general industrial diesel engine operating instructions, reference the Operating Instructions MAN Industrial Diesel Engines D 2876.

The transmission section describes the Manual Transmission operation and shift patterns. Understand the shift sequence before you tear into the gearbox. For detailed calibration of the Manual Transmission, you’ll want the service manual – but the operator manual covers daily checks like oil level and clutch adjustment.

FAQ

Can I use this manual for full engine rebuild?

No. This is an operator manual, not a service manual. It covers daily operation, safety, and basic maintenance.

What torque specs are included?

While the manual does not list every bolt torque, it includes critical specifications such as wheel lug nut torque, hydraulic system pressures, and tire inflation. For engine torque values, you need the corresponding service manual. This operator manual focuses on safe operation, not overhaul. Check the specifications section for fluid capacities and recommended lubricants. The decal placement and safety messages are the primary content – essential for operator training and OSHA compliance.

Stop guessing with third-party data or worn-out photocopies. Get the factory documentation straight from Manitou. Access the Factory Manual and keep it on the lift truck where it belongs.