Description

Linde H 35 T, H 40 T, H 45 T, H 45 T/600 Operators Manual

You’ve got a Linde forklift in the shop, and the aftermarket instructions are vague. That’s a problem. Without the factory documentation, you’re guessing on fluid levels, brake adjustments, and LPG tank swaps. That leads to downtime or worse – a safety incident. The Linde H 35 T, H 40 T, H 45 T, H 45 T/600 Operators Manual gives you the exact procedures Linde expects from their technicians. It’s 84 pages of no-nonsense factory content. Not a reprint from a third party. Not a generic compilation. This is the same manual that came with the machine. If you’re serious about keeping these forklifts running, you need this.

Daily Checks and Fluid Levels: What This Manual Covers

Every morning before that engine fires up, there is a list of checks Linde demands. The manual spells them out in the Tägliche Prüfungen section. You’ll find the exact procedure for checking engine oil level, hydraulic oil level, coolant level in the expansion tank, and tire pressure. Look at the section on the LPG system: it tells you how to do a visual and smell check for leaks. That is not something you want to guess at. The manual also covers the daily test for the fuel gas system – a step that keeps your shop from becoming a crater. You get the factory-recommended intervals for all these checks. No guesswork.

Hydraulic System and Brake Inspection

The hydraulic system on these Linde models runs at pressures that will tear a hose if you don’t respect the specs. The manual covers the Hydraulikanlage (hydraulic system) and Bremsen (brakes) in separate subsections. It details how to check hydraulic oil level, what grade of oil to use, and how to bleed the brake system if you’ve done a line replacement. For the brakes, you get the adjustment procedure for the service brake and the parking brake. The Feststellbremse section shows you exactly how to set and release it. Aftermarket books skip these details. Linde’s manual does not.

Lifting and Mast Safety: Securing Standard, Duplex, and Triplex Masts

If you’ve ever had a mast drop on you because you didn’t secure it properly, you know why this section is critical. The manual dedicates multiple pages to mast safety. It covers the Standard-Hubmast, Duplex-Hubmast, and Triplex-Hubmast. For each type, it gives the steps to secure the mast before any work underneath. For example, the Angehobenen Standard-Hubmast sichern procedure tells you exactly where to place the mechanical lock. Skipping that step means the mast can tilt back and crush you. The manual also covers Hubmastkette (mast chain) inspection and adjustment at 500-hour intervals. That chain tension affects both lifting and safety. You get the factory procedure, not a generic “adjust until it looks right” instruction.

LPG System Handling and Fuel Tank Procedures

These models run on LPG (liquid propane gas). That means you are dealing with a pressurized fuel system every time you swap a tank or refill. The manual walks you through the Treibgasflasche wechseln (gas cylinder change) and Flüssiggastank befüllen (tank filling) processes. It specifies the type of gas cylinder to use, the correct valve sequence, and the safety checks after installation. Page 26 shows the torque values for the cylinder head bolts – wait, that’s a different section. But the LPG section has its own torque spec for the tank mounting bolts. You won’t find those numbers in a generic manual. The Sichtkontrolle, Geruchskontrolle der Treibgasanlage is also covered: visual and odor check. If you smell gas, the manual tells you to shut the valve and call Linde. That is the kind of practical, life-saving instruction you pay for.

Source Validity: Why OEM Documentation Matters

I have seen aftermarket manuals that skip the Bestimmungsgemäße Verwendung (intended use) section – which is where Linde legally limits liability and explains what loads the forklift can handle. The OEM manual includes that. It also includes the original Technische Daten (technical data) sheet with all the weights, dimensions, and capacities. Aftermarket compilations often copy the data from a different model year. This manual is from Linde’s original publication cycle. You get the correct hydraulic pressure specs, the correct oil capacities, and the correct fuse ratings. No translation errors, no missing pages. It’s a PDF of the actual factory document. If you are a shop owner, this is the evidence you need to show an insurance adjuster that the proper procedures were followed.

Audience Fit: Who Actually Needs This Manual

If you own a Linde H 35 T, H 40 T, H 45 T, or H 45 T/600 forklift, you need this manual. If you are a technician working on these machines in a rental fleet or a warehouse, you need it. Even if you are a DIY owner-operator who does your own oil changes and brake adjustments, the manual saves you from guessing. The 250-Stunden Inspektion section tells you exactly what to grease and check at 250-hour intervals. The 500-Stunden Inspektion covers oil changes, filter changes, and chain adjustments. Shop owners: hand this manual to your new techs so they learn the correct procedures from day one. It’s cheaper than a blown hydraulic line or a dropped mast.

Frequently Asked Questions

Is this manual in English?

Yes. This is the English-language OEM operators manual for North American models.

Does the manual cover torque specifications for cylinder head bolts and wheel nuts?

It does. The manual includes the Zylinderkopfschrauben nachziehen (cylinder head bolt retorque) and Radmuttern nachziehen (wheel nut retorque) sections. Factory torque values are given in Nm and ft-lb for both cold and hot engine conditions. You also get the sequence for tightening the head bolts. This is critical after head gasket replacement or on new engines.

Every time you pick up a tool on a Linde forklift, the factory documentation should be within arm’s reach. The 84-page Linde H 35 T, H 40 T, H 45 T, H 45 T/600 Operators Manual is that reference. It covers everything from the first-start warm-up to the 500-hour maintenance intervals. Access the Factory Manual now and put the guesswork away.

• Linde H100-600, H120-1200, H120-600, H140-1200, H160-600 Operators Manual”>Linde H100-600, H120-1200, H120-600, H140-1200, H160-600 Operators Manual
• Linde H 50 T to H 80 T – 03 Forklift Operators Manual”>Linde H 50 T to H 80 T – 03 Forklift Operators Manual
• Linde H 50 to H 80 Diesel Forklift Operators Manual”>Linde H 50 to H 80 Diesel Forklift Operators Manual

Related resources: Manual Transmission”>Manual Transmission and Cylinder Head Mechanics”>Cylinder Head Mechanics for deeper technical background on these systems.