Description

Liebherr L 508, L 1580 2014 Service Manual

I’ve lost count of how many times a shop has burned a Saturday because some third-party PDF told them to torque the head bolts to 90 ft-lbs when the factory spec was 110. That mistake costs you an engine. This Liebherr L 508, L 1580 2014 Service Manual is a direct scan from Liebherr-Werk Bischofshofen — 360 pages of the real thing, not some aftermarket translation. It covers both the L 508 and L 1580 wheel loaders, which share a lot of drivetrain and hydraulic architecture. If you’re touching one of these machines, this is the only book you should have on the bench.

Safety Instructions: 20 Subchapters That Matter

Section 010.1 runs twenty subchapters — from general safety all the way to ROPS/FOPS, hydro accumulators, welding precautions, and slope operation. I know most guys skip the safety pages, but here’s the thing: Liebherr wrote these for a reason. Page 3 shows the DANGER, WARNING, CAUTION structure they use. If you ignore the warnings on hydro accumulators (section 010.1.12), you’re looking at a burst line that can kill a tech. Read the safety section at least once. It’s not fluff; it’s your insurance.

Torque Specs and Fluid Capacities

Section 020 gives you technical data on the drive group and engine. Section 030.2 has the filling quantities and lubrication chart. You need to know which hydraulic oil to use? Liebherr specifies their own oil in 030.3.6.1, and they tell you what to do if you’re forced to use engine oil as hydraulic oil (030.3.6.2). The torque tables for metric standard and fine threads live in 010.3.1. Don’t guess — look it up. A 12.9 bolt needs different torque than a 10.9, and this manual has the numbers.

What About the Diesel Engine Special Tools?

Section 010.2.1 lists the special tools for the diesel engine. If you’re doing an injector pump job or pulling the head, you need those tools. The manual also covers assembly instructions for the piston and piston nut of the hydraulic cylinder per WN 4121 (010.3.2). That includes maximum permissible adapter operating pressure. You can’t improvise that stuff and expect it to hold.

Get the Right Torque Data

I’ve seen guys use generic bolt torque charts and snap fastener bolts on a loader axle. This manual gives you prestressing forces and tightening torques for metric standard and fine threads (010.3.1). The table is specific to the materials used on these loaders. Use a calibrated torque wrench — not a clicker that’s been dropped. The difference between 150 Nm and 170 Nm (110 ft-lbs and 125 ft-lbs) can mean the difference between a joint that holds and a joint that leaks.

3 Reasons to Choose OEM Documentation

First, aftermarket manuals often copy wiring diagrams with missing pins or incorrect wire colors. Second, the Manual Transmission section in a third-party guide may skip the transmission control valve adjustments that are unique to the L 508. Third, Liebherr updates their manuals with service bulletins; this 2014 edition includes the latest procedures for the L 1580. You can check our Liebherr D 904 D 906 D 914 D 916 D 924 2003 Service Manual – OEM Factory Specs if you work on their older diesel engines, but for these loaders, this is the one.

Audience Fit: Who Needs This Manual

If you’re a mobile equipment tech or a farmer who runs an L 508 or L 1580, this manual saves you the headache of guessing. The maintenance schedule in section 030.1 tells you exactly when to change hydraulic oil, axles, and transmission fluid. The preservation guidelines (010.4) show you how to store the machine properly. Even the wiring diagrams and hydraulic plans (mentioned in the preface) are OEM — they’ll match the machine you’re working on. Beginners should pair this with a Liebherr R984 C 2008 Service Manual – OEM Factory Specs for Track Excavator if they want to understand Liebherr’s system approach, but the loader manual stands alone for its range.

Source Validity: OEM Factory Print

This service manual is a Manual Transmission for the transmission? No, this is the complete machine manual. It’s not a reprint from some third-party aggregator. The PDF was produced by Liebherr’s Technical Documentation Department in November 2014. The copyright page (page 2) says “copyright by LIEBHERR L 508-1580”. If you buy from us, you get the exact same file that a Liebherr dealer uses. No missing pages, no OCR errors on torque specs.

FAQ

Does this manual cover both the L 508 and L 1580 models?

Yes. The service manual is titled “L 508-1580” and applies to both models. They share the same base platforms and many components.

Are torque values given in both metric and imperial units?

The manual provides torque specs in Newton-meters (Nm) for metric fasteners. You’ll need to convert to ft-lbs yourself — the numbers are in the tables in section 010.3.1. I recommend keeping a conversion chart on your toolbox. A common conversion: 100 Nm is about 74 ft-lbs. If you’re used to working in imperial, do the math before you turn a wrench. The tolerances are tight — 10% off and you’re either under-torqued or stripping threads.

You’ve seen what bad information does to a job. Stop chasing ghosts. Get the factory document that tells you exactly what Liebherr expects. Access the Factory Manual now and keep it on your tablet or laptop in the shop.

• Liebherr Serie 4 2013 Service Manual – 1176 Pages of Factory Specs