Description

Land Rover Defender 110 1994 Parts Catalog

If you’re ordering parts for a 1994 Land Rover Defender 110 and the new part doesn’t match the old one, you’ve wasted time and money. This Land Rover Defender 110 1994 Parts Catalog is the factory document that eliminates that problem – 1155 pages of genuine part numbers, exploded diagrams, and serial number identification. I’ve turned wrenches for 28 years and seen too many rigs sidelined by aftermarket catalogs with wrong numbers. This one is the real deal.

Engine Section: 2.5 to 3.5 V8 – What’s Inside

From the 2.5 N.A. diesel to the 3.5 V8 Carb, the Engine section covers every powertrain. The catalog breaks down the 200Tdi and 300Tdi separately, with part numbers for the injection pump, gaskets, and timing components. If you’re rebuilding a 2.5 Turbo Diesel, the engine serial numbers are listed alongside the gearbox codes so you match the correct flywheel and clutch. The fuel system parts for the 300Tdi injection pump are all there – no guessing which shim stack you need.

Axles & Suspension: Matching Serial Numbers

The Axles & Suspension chapter includes front and rear axle serial numbers for the Land Rover Defender 110. Left-hand and right-hand drive variants are listed separately because half shafts and swivel housings differ. Order the wrong stub axle and you’ll pull it apart again. The factory diagram shows bolt grades and washers – don’t trust aftermarket drawings that miss details.

Why a Factory Parts Catalog Beats Aftermarket

Aftermarket parts catalogs often reprint old data without updates. This 1994 edition includes revisions through August 1994. The VIN code table at the front lets you decode body style, engine, and steering from the VIN – aftermarket sources rarely include that. The Master Index and Numerical Index let you find any part number in seconds. I use the Numerical Index constantly when a customer walks in with a rusty tag. The engine and gearbox serial number lists (pages 2–4 in the intro) are invaluable for identifying a 200Tdi versus a 300Tdi.

Does This Catalog Cover the Fuel System?

Yes. The Fuel System & Air Cleaner section covers the entire delivery path: injection pump, fuel filters, lines, and air cleaner housing. The Cooling & Heating section includes radiators, water pumps, and heater matrixes. The Electrical section covers switches, relays, and wiring connectors for the body electrical system. If you need a coolant hose clip or a fuel line bracket, the part number is here – not in a generic cross-reference.

7 Systems Covered in This 1155-Page Catalog

The catalog covers Engine, Gearbox, Transfer Box, Axles & Suspension, Steering, Brakes, Fuel System, Exhaust, Cooling & Heating, Body Electrical, Body & Chassis, Interior Trim, Seats, Stowage, and Accessories. That’s effectively every system on the Defender 110 from 1987 onwards. The 1155 pages are fully searchable in PDF form, so you can jump to the exact section. For a broader reference, the Automotive Industry Overview puts this in perspective, and if you’re cross-referencing batteries, the Automotive Battery guide helps – but this catalog gives you the exact Land Rover part number.

Now, two questions I get asked often:

What engines are covered in the 1994 Land Rover Defender 110 Parts Catalog?

All engines: 2.5 Petrol, Diesel, Turbo Diesel, 200Tdi, 300Tdi, and 3.5 V8 Carb.

Why should I use this factory catalog instead of aftermarket copies?

Aftermarket parts catalogs often reprint old data or miss updates. This factory catalog from August 1994 includes the latest revisions for the 1987 onwards Defender 110 models. It lists genuine part numbers with Land Rover’s own serial number identification for engines, gearboxes (LT77, R380, LT85), transfer boxes, and axles. You can cross-reference VIN codes, find exact part numbers for early and late variants, and avoid ordering the wrong seal, gasket, or bearing. The factory diagram ensures you see the correct orientation and fastener count. Unless you have the exact part number, you risk delays and returns. This catalog saves that headache. The Land Rover Series I 1948-1953 Parts Catalogue – Section: Section Iii follows the same philosophy – never trust a reprint.

Stop ordering the wrong parts. Get the factory spec. The Land Rover Defender 90/110/130 1991 Workshop Manual – LT77S Gearbox and Land Rover Series II & IIA Parts Catalogue (1958) are also available if you need workshop procedures or older model support. For the 1994 Defender 110, this Parts Catalog is the only source you need. Access the Factory Manual now.