Description

Kubota SVL75, SVL90 2011 Workshop Manual

You’ve got a Kubota SVL75, SVL90 2011 Workshop Manual on the bench, and the customer is waiting. I need the real numbers — not some aftermarket translation that guesses the head bolt torque. I’ve been wrenching on Kubota compact track loaders since before these Tier 3 engines came out. This 2011 factory manual is 895 pages of what Kubota actually built. If you skip the source, you’re gambling with a hydraulic line or a cylinder head. Let’s go through what’s inside.

Safety Precautions and Work Procedures

First section you hit is INFORMATION — it starts with “SÉCURITÉ D’ABORD” (Safety First). I don’t care if you’ve done a thousand track loader jobs; the manual lists specific precautions for high-pressure washing, electrical component handling, and decal locations. Page I-1 has the basic rules. Pay attention to the section on pressure washing (“LAVAGE DE L’EXCAVATRICE AVEC UN APPAREIL DE LAVAGE SOUS PRESSION”) — you can push water into connectors and ruin a harness in minutes. This book tells you what to seal.

Torque Specs: General Bolts to Hydraulic Fittings

Look at the table of contents under GÉNÉRALITÉS — there’s a dedicated section, “COUPLES DE SERRAGE”, starting on page G-17. It covers general bolts, studs, hydraulic hose fitting torque (including locknut torques for O-ring boss adapters and cone adapters), and pipe flange bolt torque. For engine work, you need the special torque tables in the MOTEUR section — those are split between SVL75 (page 1-S15) and SVL90 (page 1-S17). Don’t use a generic chart; this book gives the exact N·m values Kubota stamped on the part.

Engine Overhaul – V3307 and V3800 Differences

Two engines: the SVL75 runs a V3307-DI-TE3-CTL (4-cylinder), and the SVL90 gets a V3800-DI-TE3-L6 (6-cylinder). The manual splits them in the FONCTIONNEMENT section. Each has separate specs, dimensions, performance curves, and a breakdown of the block, cylinder head, four-bolt-per-cylinder mounting, and the E-CDIS injection system. The SVL90 section also covers the compensator for the turbocharger (“CompensaTeur de Surcharge”). If you’re rebuilding either motor, you need the specific piston and ring clearance numbers from this book.

Which Maintenance Interval Applies to Your Machine?

Flip to ENTRETIEN under Generalities — page G-21. The schedule runs from every 50 hours all the way out to 3000 hours and biennial items. There’s a separate table for daily checks and a section on track tension adjustment. The manual also covers fuel system bleeding, fuse replacement, and how to open and close components properly. You don’t get that from a parts catalog.

Hydraulic System: Pump, Valve, and Cylinder Service

This is where the book pays for itself. The hydraulic section (SYSTÈME HYDRAULIQUE) has a system circuit diagram, HST pump details, gear pump specs (including high-flow option for SVL90), pilot valves, control valves, drive motor, lift cylinder, bucket cylinder, and quick-attach cylinder. There’s a separate solenoid valve section for the auxiliary and quick-attach options. The troubleshooting guide (3-S1) helps you isolate a drift or weak function without swapping parts blind.

7 Systems Covered in This 895-Page Manual

Count them: Information & Safety, Generality (machine ID, lubrication, torque, special tools), Engine (two variants), Machine Chassis (front, upper structure, track frame), Hydraulic System (operation and service), plus the electrical and wiring precautions. Each system has its own torque tables, diagnostic procedures, and exploded views. The original file name says it all: Kubota_SVL75-SVL90_2011_Workshop_Manual_fr-29128005805.pdf — this is the factory release from KISC issued March 2011.

Is this manual in English?

No, the original factory manual is in French.

Does it cover the SVL90 with the V3800 engine?

Yes. Section MOTEUR covers both the SVL75 (V3307-DI-TE3-CTL) and the SVL90 (V3800-DI-TE3-L6) with separate specifications, dimensions, and performance curves. The engine overhaul section includes special torque values for each model.

What torque values are included?

The manual has a dedicated section “COUPLES DE SERRAGE” in the Generalities (page G-17) with specs for general bolts, studs, hydraulic hose fittings, and pipe flange bolts. Additionally, the engine section lists special torque values for cylinder head bolts, injection pump, and other critical fasteners.

Can I use this manual for troubleshooting hydraulic leaks?

Yes, the Hydraulic System section starts with a troubleshooting guide (3-S1) and includes detailed circuit diagrams and component service procedures for pumps, valves, cylinders, and HST motor.

Related Documentation

• Kubota SVL75 2013 Operators Manual – Factory Specs for CTL
• Kubota R420B R520B Workshop Manual – Factory Specs for Wheel Loaders
• Kubota Z402-EB 2000 Workshop Manual – Factory Service Specs
• Manual Transmission
• Manual Transmission

Enough talk. If you need to pull a head, rebuild a drive motor, or just verify a torque spec on a hydraulic line, this 2011 factory manual has the data you can trust. Stop chasing aftermarket nonsense. Access the Factory Manual and get back to work.