Description

Kubota KX36 Parts Catalog – 268-Page OEM Parts Breakdown

You are pulling a part number off a rusty tag that’s half gone, or you’ve got a piston that doesn’t match the cylinder you just pulled. That’s when you need the Kubota KX36 Parts Catalog — not some aftermarket PDF that lists generic part numbers and guesses the weight. This is 268 pages of factory-sourced part breakdowns, direct from Kubota’s own documentation. Every reference number, every seal, every bolt that holds your KX36 together is listed here with its OEM part number and serial number range. I’ve seen guys order the wrong oil pan gasket three times because they trusted a third-party list. Stop that habit. This catalog gives you the exact part numbers you need, including the ones Kubota updates mid-production.

CRANKCASE and OIL PAN: What the Catalog Covers

The TOC splits the engine into sections that match how you actually disassemble it. CRANKCASE (page 1) shows the complete crankcase assembly with part numbers for every plug, dowel pin, and oil pressure switch. The OIL PAN section (page 2) lists the oil pan itself, the dipstick, the drain plug, and the oil filter housing — all with original weights in both kgf and lb. Need a replacement oil pan? Part number 16215-01610. That information is in the catalog. You don’t have to call a dealer and wait on hold. You open the PDF, find the page, and order the correct piece.

Does This Catalog Include the Crankshaft and Camshaft?

Yes. The PISTON CRANKSHAFT section covers the crankshaft assembly, main bearings, and connecting rods. The CAMSHAFT section lists the camshaft, timing gears, and thrust plates. Both sections include the exact part numbers for each component and the quantity needed. If you’re rebuilding the bottom end of your KX36 engine, this catalog tells you which main bearing case to order and whether the camshaft has been superseded. The VALVE AND ROCKER ARM section gives you the cylinder head components — valves, springs, rocker arms, and adjusters. These are the parts that wear out on a high-hour machine. Having the correct part number before you tear it down saves you a return trip.

268 Pages of Part Numbers and Diagrams

268 pages total. That’s not a thick manual, but every page is dense with information. Each assembly gets an exploded diagram with callouts, a parts table with item number, part number, description, quantity, serial number range, and weight. The catalog covers the full machine, not just the engine. You’ll find sections for the CONTROL VALVE, SPOOL SECTIONS (boom, bucket, travel, arm, blade, swivel, swing), all the hydraulic cylinders, the truck frame, the canopy and cabin, the electrical system (starter, alternator, battery, wiring), and even the labels and accessories. If you need to track down a seal for a control valve spool section, the catalog has a dedicated page for each spool section (e.g., SPOOL SECTION BUCKET MECH) with part numbers for every O-ring and backup ring.

Engine and Fuel System: What You Get

Engine components are covered in the first third of the catalog: CRANKCASE, OIL PAN, PISTON CRANKSHAFT, MAIN BEARING CASE, CAMSHAFT, CYLINDER HEAD, VALVE AND ROCKER ARM, CYLINDER HEAD COVER, GEAR CASE, ENGINE BRACKET, AIR CLEANER INLET MANIFOLD, MUFFLER EXHAUST MANIFOLD, NOZZLE HOLDER GLOW PLUG, SPEED CONTROL PLATE, STOP SOLENOID, GOVERNOR, INJECTION PUMP, FUEL CAMSHAFT, ACCEL LEVER, FUEL PIPING, FUEL FILTER, FUEL TANK. That’s the full fuel system from tank to injector nozzle. Every fuel line part number for the two serial number breaks (S No 56246 and 56247) is listed separately — because Kubota changed the routing mid-production. The Water Pump, Radiator, Water Pipe, and Flywheel Starter sections are also included.

Trust Only OEM Part Numbers

Aftermarket parts catalogs often list a single part number that they claim fits multiple machines. Kubota’s OEM catalog for the KX35 and KX36 are not the same. This catalog specifically matches the KX36 model. The OEM part numbers here are the ones that come in Kubota’s factory packaging. Matching the part number from this catalog to what you remove guarantees you get the correct seal, gasket, or hydraulic component. You save time and avoid the hassle of returns. I’ve seen too many DIYers order a “universal” cylinder seal kit and end up with a leak because the profile was wrong. Don’t be that guy.

Frequently Asked Questions

Is this the same as a service repair manual?

No. This is a parts catalog, not a service manual. It gives you exploded diagrams and part numbers, not torque specs or step-by-step repair procedures. You need both documents to do a proper rebuild.

Can I order parts directly using these numbers?

Yes. The part numbers in this catalog are the OEM Kubota numbers that any Kubota dealer or online parts supplier uses. Cross-reference your old part with the diagram to confirm the revision. Some parts have been superseded with a new number — this catalog shows the latest part numbers according to the serial number range of your machine. For example, the fuel filter component parts section lists the exact filter element part number for your KX36.

If you are rebuilding a Kubota KX36 mini-excavator or just replacing a damaged oil pan or a set of seals in the control valve, having this OEM parts catalog on your tablet or printed out saves you the frustration of wrong parts. The diagrams show you exactly how each assembly goes together and which hardware is used. Stop guessing on part numbers. Access the Factory Manual now from AutoRepairManuals and get the correct Kubota part numbers for your KX36.

Related Manuals:

• Kubota V3300-T-E2B-EPS-1 Parts Catalog – 53-Page OEM Parts Breakdown
• Kubota YU4210, YW0981 Parts Catalog – 274-Page OEM Parts Breakdown
• Kubota RCK60-27B Parts Catalog – 27-Page OEM Breakdown

External reference: Automotive Industry Overview