Description

Kubota KX161-3 2004 Parts Catalog

Kubota KX161-3 2004 Parts Catalog – 352 pages of OEM factory part numbers and illustrations. If you’ve ever ordered a hydraulic hose or a track roller based on a third-party website and ended up with the wrong thread pitch or a seal that doesn’t fit, you know the pain. This manual stops that. It’s the same binder the dealer pulls from. Kubota put this together for their own parts counter – not some reprint outfit.

Parts Identification: What 352 Pages Actually Cover

This catalog breaks down the KX161-3 into every subassembly: undercarriage, boom, arm, bucket, blade, cab, engine, air conditioning, and the rubber vs. steel track variants. The table of models (page 3 of the original) lists code numbers like RGX02-2111 for the iron-track version with a cabin. Each section has an exploded diagram with callouts and a matching parts list. You get the part number, description, and quantity per machine. No guessing if a bolt is M10 or M12 – it’s right there next to the drawing.

Ordering Parts Correctly: Factory Procedure

The first page of the manual tells you exactly how to use it: check the part number and name, then order. That’s it. But here’s what most DIY guys miss – the illustrations show the correct orientation and stack-up. When you’re rebuilding the final drive, you see the shims and snap rings in order. Cross-referencing a worn part against the diagram saves you from ordering a complete assembly when all you needed was a seal.

OEM vs Aftermarket Parts Lists: Why This Matters

I’ve seen aftermarket catalogs swap a -A suffix for a -B revision and not tell you. Kubota changes part numbers when they revise a component. This catalog was printed in 2004 and covers serial numbers starting at 00001. If you have a late-model KX161-3 with a different hydraulic pump, you’ll see separate entries. No third-party compiler is going to catch those variations. Kubota KX121-3 KX161-3 Workshop Manual picks up where this ends – it gives you the torque specs and service procedures.

Audience Fit: Who Actually Needs This

If you own a KX161-3 excavator and do your own maintenance, you need this. Even if you only change the oil and filters, you’ll use it for the correct filter part numbers and O-ring sizes. Small rental fleets and independent repair shops – this cuts down the time you spend digging through online catalogs that may or may not be current. The Parts Catalog is also the foundation for any restoration project. I’ve seen guys try to rebuild a KX161-3 track frame using aftermarket exploded views and end up ordering left-side bolts for the right side. This manual prevents that.

3 Sections That Save the Most Time

• Table of Models – quickly find your configuration (iron/rubber, cabin/canopy, blade type).
• Engine group – part numbers for V3300-series components, including gasket kits.
• Hydraulic system – pump, valve, and cylinder parts with seal kit numbers.

Each section uses the same numbering scheme as the Kubota factory system. When you call a dealer, you read them the part number from this book. No paperwork has left my desk in 15 years without an OEM part number next to it. Kubota V3300-T-E2B-EPS-1 Parts Catalog – 53-Page OEM Parts Breakdown is the companion engine manual if you need deeper engine detail.

Source Validity: All Original Kubota Data

This is a direct scan of the official Kubota printed manual. The PDF is 352 pages, fully bookmarked in two parts: Reservdelskatalog Kubota KX161-3 del 1 and del 2. Every page matches the paper manual. There’s no third-party editing, no re-indexing errors. Automotive Industry Overview shows how fragmented aftermarket documentation can be – this is the opposite of that. You get the factory layout as designed by Kubota engineers. Kubota YU4210, YW0981 Parts Catalog – 274-Page OEM Parts Breakdown follows the same format for different machines.

FAQ

Does the catalog cover the rubber-track version (KX161-3 with rubber tracks)?

Yes. The Table of Models lists both iron and rubber undercarriage code numbers (e.g., RGX02-2111 for iron, RGX02-2112 for rubber). Each variant has its own section with proper part numbers for rollers, sprockets, and track chains.

What serial number range does this manual cover?

Serial No. 00001~ (all machines).

Before you spend money on the wrong parts, pull the catalog for your machine. The original factory data is the only reliable source when you’re paying for OEM components. Access the factory manual from AutoRepairManuals and keep it on your phone or tablet in the shop.