Description

Kubota B7200DT Parts Catalog – Factory Part Numbers for the B-Series Tractor

If you are hunting for the right part number for a Kubota B7200DT Parts Catalog, you know the frustration of wading through aftermarket cross-reference charts that list everything except what you need. That is why you need the OEM document – the original 214-page parts breakdown that Kubota themselves used at the factory. No generic illustrations, no “fits similar models.” This is the real thing.

Engine and Cylinder Head – First Sections of the Index

The catalog opens with the crankcase (page 1) and immediately moves into the cylinder head, oil pan, gear case, and main bearing case. Every section lists the part number, description, and the drawing reference book number. Need the valve rocker arm assembly? Section 01E010. The camshaft is 01E011. The crankshaft and piston group show up under 01E012. You get the factory exploded diagram for each subassembly, so you can visually confirm which thrust washer or bearing insert fits your serial number range.

Does This Manual Cover the Transmission and Rear Axle?

Yes. The transmission section starts with the transmission case (01T001) and runs through the PTO cover, clutch rod, second through fifth shafts, spiral bevel shaft, and reverse shaft. The rear axle case, differential, rear axle shafts, and every wheel option (9.5-16, 8-16, 29×12.00-15, 31×13.5-15) are listed with individual part numbers. If you are rebuilding the clutch or replacing a shift fork, you want the OEM index – aftermarket catalogues often skip the speed change fork and rotary fork detailing. This one includes them (01T022–01T025).

Why OEM Beats Aftermarket Cross-Reference

I have seen too many parts counter guys grab a third-party electronic catalog and give you a part that is “close enough.” On a Kubota B7200DT, close enough means a day wasted when the injection pump nozzle holder does not seat because the thread pitch is off. The OEM parts catalog eliminates that guesswork. Each part number links to a specific book reference (e.g., 100K0100) so you can verify fitment across multiple models. For a thorough discussion of the automotive industry’s standards for original equipment documentation, see Automotive Industry Overview. Additional context on how OEM specs are validated is available at Automotive Industry Overview.

Hydraulics, Steering, and Optional Equipment

The catalog covers the hydraulic pump (01E019), hydraulic block, steering assembly, and the separate sections for option kits: dynamo 1 and 2, power steering (A/CA models), booster, control valve, and even the horizon muffler. If your B7200DT has the bolt-on power steering retrofit, you need section 01T032 and the option pages. The exploded view for the hydraulic block includes every O-ring and bolt – no searching through a generic “seal kit” package.

How the 214 Pages Are Organized

The table of contents lists nearly 100 sections, but the structure is logical: ENGINE (01E series), TRANSMISSION (01T series), REAR AXLE, BRAKE, STEERING, SPEED CHANGE LEVER, HOOD/CHASSIS, FUEL SYSTEM, ELECTRICAL, then OPTIONS and ACCESSORIES. Each section has its own line-item part numbers and exploded drawing number. You do not have to flip through 214 pages to find what you need – the index at the start points you to the correct book number. And because it is a genuine Kubota publication, the diagram matches your tractor, not a generic silhouette.

Related Manuals You Might Need

If you work on multiple Kubota machines, check these OEM catalogs: Kubota V3300-T-E2B-EPS-1 Parts Catalog – 53-Page OEM Parts Breakdown for the industrial engine, Kubota YU4210, YW0981 Parts Catalog – 274-Page OEM Parts Breakdown for zero-turn mower components, and Kubota RCK60-27B Parts Catalog – 27-Page OEM Breakdown for the 60-inch mower deck.

Frequently Asked Questions

Does this catalog include the injection pump and nozzle holder?

Yes. Sections 01E014 (Injection Pump) and 01E015 (Nozzle Holder) are present, with separate sub-sections for internal parts.

What about the front axle and front differential?

Covered in the FRONT AXLE CASE, FRONT GEAR CASE, FRONT DIFFERENTIAL, KNUCKLE ARM, DRIVE SHAFT, and BEVEL GEAR sections. All part numbers and exploded views are from the factory.

Is this an OEM document or a reprint?

This is a digitally scanned copy of the original Kubota parts catalog. It is not a third-party summary. The page numbering, part numbers, and book reference numbers are exactly as printed by Kubota.

Can I order parts directly from the part numbers in this catalog?

Yes – every listed part number matches Kubota’s genuine parts system. Take the number to your dealer or order online.

You have spent enough time guessing which washer goes where. Access the Factory Manual and get the Kubota B7200DT parts catalog on your tablet or printed at the bench. The 214 pages will pay for themselves the first time you avoid ordering the wrong seal.