Description

John Deere 9501 1994 Parts Catalog

If you’ve ever ordered a part for a 9501 combine and got the wrong one because you guessed the serial number break, you know the pain. I’ve seen guys bolt up a pickup platform only to find the belt pickup bracket doesn’t line up because they used the wrong hardware from a aftermarket reprint. This catalog ends that. It’s the John Deere 9501 1994 Parts Catalog, 481 pages of factory grid-indexed part callouts with exact serial number ranges. No guesswork, no returns.

Parts Identification Using Serial Numbers

Page 2 of this catalog tells you exactly where the PIN plate is on the 9501 Pull-Type Combine—left-hand side above the rear axle. It lists serial number breaks like “635401-” and explains the two-line format: HO9501X635401 on top, COMBINE below. You need that plate to use this catalog. Without it you’re guessing, and guessing costs you time and money. The grid sections (01A through 02F) are all keyed to these serial ranges. If your machine falls between 635401 and 645700, this catalog covers it.

Belt Pickup and Platform Coverage

Note on the second page: for three-roller belt pickup parts, the catalog directs you to John Deere Three-Roller Belt Pickup Parts Catalog – PC-1189. That’s the level of cross-referencing you get here. The primary pickup and platform sections for the 9501 are under Grid 01 sections A through I. You’ll find everything from the pickup reel drive (01E) to the platform auger (01F). Each part number is called out with a key number inside a box if it’s sold as a service assembly. Page 3 explains those box-enclosed illustrations. If you see a box without a key number, those are non-current parts—don’t order them.

Understanding the Grid Index Structure

The TOC is laid out in groups: 01A through 01I, then 02A through 02F. Each group has sub-sections like 01A02, 01A03, etc. That’s the OEM grid system. You do not flip through randomly. You find your component group (e.g., 01E for elevator drive), then scan the list for your serial number range. This catalog uses arrow diagrams on every page to show the front of the unit. Right-hand and left-hand are determined by facing the direction of travel—page 3. I’ve seen techs get that wrong. Re-read it if you have to.

Bolt Strength and Safety Warnings

Page 3 has a section on bolt and cap screw strength identification that too many people skip. It tells you that high-strength fasteners equivalent to SAE Grade 8 are marked “HS SAE 8” in this catalog. Standard bolts are Grade 5 or lower. For European-equivalent property class 10.9, it’s called out too. Do not substitute a Grade 5 for a Grade 8 on a combine header. I’ve seen a bolt snap on a 9501 platform and it took out a $200 belt. This catalog warns you: the remanufactured components may use different fasteners—check before reusing old bolts.

3 Reasons to Choose OEM Documentation

First, aftermarket parts catalogs often re-number the grid system or skip serial breaks. This is a direct scan of the John Deere factory print dated 01-DEC-94. Second, the kit information is placed immediately after the story where it’s used, not buried in an appendix. Third, the this Wikipedia article on diesel engines might explain engine theory, but it won’t give you the OEM part number for the 9501’s belt pickup idler pulley. Only this catalog will. If you want background on engine mechanics, see this Wikipedia article on diesel engines. For the actual part, buy the factory manual.

Common Questions About the 9501 Parts Catalog

Does this catalog cover all years of the 9501 combine?

It covers serial numbers 635401 through 645700. That’s the 1994 vintage. Earlier or later machines need a different catalog.

Can I use this to rebuild the engine?

This is a parts catalog, not a service manual. It gives part numbers, not removal or torque procedures. You need the service manual for that.

How do I navigate the grid index?

Look at the Table of Contents in the first few pages. Find your component group (01A for platform, 02A for rear axle, etc.). Then go to the page listed. The grid numbers like 01A02 are page references.

Are bolt torque specs included?

No. This catalog only lists bolt strength grades and part numbers. For torque values, get the factory service manual.

If you run a shop or maintain your own 9501 combine, stop buying aftermarket reprints that leave out serial breaks or mis-label hardware. This is the factory file—481 pages, scanned from the original John Deere print. Identify every part by the correct number before you order. Access the Factory Manual and keep it on your tablet or print it out. You will use it on every repair.

• John Deere 2130 Parts Catalog – Factory Specs for Correct Part Identification
• John Deere 4500, 4600, 4700 2000 Parts Catalog – OEM Grid Index
• John Deere 9400, 9100, 9200, 9300 Parts Catalog – OEM Factory