Description

John Deere 912, 914 1999 Parts Catalog

Working on a John Deere 912 or 914 pickup platform without the factory parts catalog is like trying to rebuild a transmission with a butter knife. You might get close, but you’ll waste time and probably order the wrong auger hub. This is the John Deere 912, 914 1999 Parts Catalog — 114 pages of OEM grid-indexed breakdowns, straight from Deere & Company. No third-party reprints, no scanned garbage.

John Deere 912, 914 1999 Parts Catalog: What’s Inside the 114 Pages

This catalog covers the 900 Series belt pickup and pickup platform assemblies. It includes detailed illustrations and parts lists for the 132″ Belt Pickup with Platform and the 912 (12′) and 914 (13-1/2′) pickup platforms. The manual uses a grid index system — sections A through E and L — to organize every component from the auger assembly to the center drive. You get serial number breakouts so you order the correct part for your machine’s production range.

Parts Breakdown for the 900 Series Pickup Platform

The OCR excerpt shows the manual starts with the “PICKUP, BELT, THREE-ROLLER AND PICKUP PLATFORM – 900 SERIES” section. Each grid page (like A02, A03, etc.) contains an illustration and a corresponding parts list with key numbers. The direction arrow indicates the front of the unit. Right-hand and left-hand sides are determined by facing forward travel — important when ordering side-specific parts like the auger adjustment brackets.

Grid Index A–L: How to Navigate the Parts Breakdown

The catalog uses a grid index: A, B, C, D, E, and L. Each grid letter covers a system. For example, grid A likely includes the auger drive and platform frame. Grid L might cover the hydraulic lines. The index at the end provides alphabetical references — look up “ARMS, FINGER HOLD-DOWN” and it points you to the grid where those parts appear. This saves time flipping pages.

Serial Number Ranges: Why They Matter for Part Fitment

John Deere updated parts mid-production. The catalog lists serial number ranges for each part. For instance, the auger adjustment brackets show two ranges: ( -655150) and (655151- ). If you order the wrong bracket, it won’t bolt up. This catalog tells you exactly which part fits your machine’s serial number. Check the serial number plate on the left-hand side of the frame. Example: H00912X625001 indicates a 912 platform.

Alphabetical Index: Skip the Guesswork on Part Numbers

You need the right part number. This catalog gives it to you. The alphabetical index at the back lists components from A to Z. Need a “BOTTOM SHEET”? It’s listed with the grid reference. The index also includes part numbers where available. This is where the OEM document shines — aftermarket parts catalogs often omit these cross-references.

Why OEM Documentation Beats Aftermarket Reprints

Aftermarket reprints often blur the illustrations, skip serial number breakouts, or use outdated part numbers. This is a genuine John Deere parts catalog from 1999, scanned from the original PC2210 publication. The grid index and alphabetical index are intact. If you want to see how an OEM catalog handles parts identification, compare this to John Deere 2130 Parts Catalog – Factory Specs for Correct Part Identification. Or check John Deere 4500, 4600, 4700 2000 Parts Catalog – OEM Grid Index and John Deere 9400, 9100, 9200, 9300 Parts Catalog – OEM Factory for other models. For background on diesel engine components that might relate to your tractor’s power unit, see this Wikipedia article on diesel engines and this Wikipedia article on diesel engines.

Frequently Asked Questions

Does this catalog include torque specifications?

It does not include torque specs; that data is in the service manual.

How do I know if a part fits my 914 platform?

Check the serial number on your platform’s left-hand frame plate. The catalog lists part applicability by serial number ranges, e.g., (1988-1993) for the 912 and (1988- ) for the 914. If your serial number falls within the range listed for a part, it fits. The alphabetical index can also guide you. For example, “AUGER AND SHAFT (655151- )” means that part fits platforms with serial number 655151 and above. If you have a 914 built after 1988, you’ll likely use the later revisions. Always verify before ordering to avoid returns.

Stop wasting time on wrong parts and incorrect diagrams. Access the Factory Manual from our site and get the genuine John Deere parts catalog on your screen or printed out. You’ll have the grid index, alphabetical references, and serial number breakouts at your fingertips.