Description

JLG 6RS, 10RS, 1932RS, 3248RS 2012 Parts Catalog – Factory OEM Manual

Let me save you a headache. You order a replacement part for a JLG scissor lift, it shows up, and it either doesn’t fit or you realize you bought the wrong revision because some aftermarket catalog gave you a part number that cross-references to nothing. That’s money and time down the drain. The JLG 6RS, 10RS, 1932RS, 3248RS 2012 Parts Catalog fixes that. This is the exact 110-page binder the factory techs used when these lifts were new. No reprints, no third-party interpretation – straight OEM documentation from JLG, an Oshkosh Corporation company.

I’ve run a 6-bay shop in San Antonio for 28 years. When I need a pump/motor seal or a steering cylinder rebuild kit, I don’t guess. I pull the part number off the exploded view. This catalog has 11 sections covering every major assembly: frame, ground components, scissor arms, platform, cylinders, hydraulics, electrical, decals, recommended service parts stock, special options, and a full part number index. If you’ve ever tried to reassemble a lift cylinder using an aftermarket drawing, you know why this matters.

Frame & Drive Components – Section 1

Section 1 covers the frame, front axle components (separate figures for 6RS/1932RS and 10RS/3248RS), drive and electrical components mounted to the frame, wheel drive assembly, and covers with ladder installations. Figure 1-5 shows the wheel drive assembly broken down to the bearing and seal level. Need the charge pressure? Not in this parts catalog – that’s in the service manual. But if you need the exact drive motor part number for a 10RS, it’s in Figure 1-4, page 1-10. The index at the back lists every part number and which figures it appears in. For example, part 0630580 shows up on pages 1-3, 1-5, 1-8, and 1-12 – that’s a bracket that keeps the electrical harness from chafing. You wouldn’t catch that from a generic diagram.

Ground Components: Batteries, Pump/Motor, and Tilt Sensor

Section 2 addresses ground components. Figure 2-1 shows batteries and cover installations. Figure 2-2 covers pump/motor and tilt sensor installations. If your lift has an intermittent tilt alarm, the tilt sensor bracket and hardware are on page 2-4. Figure 2-3 and 2-4 separate the pump/motor/tank assemblies by model – 6RS/1932RS in one, 10RS/3248RS in the other. That matters because the reservoir capacities differ. The ground control assembly (Figure 2-5) includes the full switch and harness wiring. If you’re replacing a faulty ground control box, order the part number from this catalog, not the one stamped on the old box – it may have been superseded.

Electrical System – Section 7

Section 7 is the electrical components installation figure (Figure 7-1). This is where you find the control module, limit switches, and wire harness part numbers. The 2012 revision accounts for both ANSI and CE spec configurations. I’ve seen guys grab a harness from a 3248RS and try to stuff it into a 10RS – the connectors look the same but the pinouts differ. The part number index at the back of the catalog lists each part and the specific figures it shows up in. For instance, part 1001130028 appears on pages 2-3, 7-6, and 7-7 – that’s a wire harness that runs through the frame. You can trace it across the entire lift.

3 Reasons to Use the OEM Index Instead of Aftermarket Catalog

First, aftermarket catalogs often combine multiple model years into one diagram. This manual is dated February 24, 2012, with revision C. Second, the OEM part number index links every component to the exact figure and page where it appears – no guesswork. Third, the special options section (Section 10) lists optional equipment part numbers that generic sources ignore. If your lift has a platform extension deck or a specific decal package, those part numbers are only in this factory document.

Cylinder and Hydraulic Sections: Get the Right Seal Kit

Sections 5 and 6 cover cylinders and hydraulic components. Figure 5-1 and 5-2 show lift cylinder assemblies for 6RS/1932RS and 10RS/3248RS respectively. Figure 5-3 and 5-4 cover steer cylinders. Each exploded view includes the seal kit part number and the proper orientation of backup rings. I’ve seen hydraulic leaks caused by a seal installed backward – the OEM drawing shows the chamfer direction. Section 6 (Figure 6-1) lists every hydraulic fitting, hose assembly, and manifold part. The part number 0961947 – a steer cylinder rod – is on page 5-3. That kind of specificity saves you from ordering a whole cylinder when you only need the rod.

Who Needs This Manual and Why

If you maintain a fleet of JLG scissor lifts – 6RS, 10RS, 1932RS, or 3248RS – in a rental yard, construction company, or facility maintenance shop, this catalog is your parts bible. DIY mechanics rebuilding a lift bought at auction will save the cost of this manual on the first mistaken part order. The audience is anyone who has to identify a component from a photo or serial number and needs an OEM reference. This is not a repair procedure manual – it’s a parts identification and ordering document. Pair it with the corresponding service manual for torque specs and troubleshooting.

Look at the other factory manuals in our collection: JLG 8042, 10042, 10054 2012 Parts Catalog – Factory OEM Skytrak Manual and JLG Illustrated Parts Manual 1930ES, 2030ES, 2630ES, 2646ES, 3246ES – Section: S and JLG Toucan 1010 Illustrated Parts Manual. Each one follows the same factory format – no generic reprints, no third-party data. For context on the importance of OEM documentation in the Automotive Industry Overview, factory parts catalogs like this one are the standard for accuracy.

I’ll tell you the same thing I tell every new tech: spend the money on the right book once, and you won’t spend it twice on the wrong part. Automotive Industry Overview

Does this manual include torque specs for bolts?

No, this is a parts catalog. Torque values are in the JLG service manual for each model.

Can I use this catalog to order parts for a 3248RS built after 2012?

It covers through the 2012 model year. JLG issued subsequent revisions with new part numbers for later builds. Check the revision log on page 3 – original issue February 24, 2012. For later models, you need the updated catalog.

How do I find a part number if I only have the old part in hand?

Use the Part Number Index starting on page 11-1. Look up the old part number alphabetically or numerically – the index lists each figure and page number where that part appears. Cross-reference with the exploded diagram to verify revision.

What is the difference between Figure 1-1 and 1-2?

Figure 1-1 shows front axle components for 6RS and 1932RS models; Figure 1-2 is for 10RS and 3248RS models. The axle assemblies are different widths and use different kingpin hardware.

Stop wasting time guessing which part fits. Access the Factory Manual from AutoRepairManuals and get the exact JLG part numbers for your 6RS, 10RS, 1932RS, or 3248RS lift.