Description

Iseki SSM72-TK538, SSM46M, SSM49M, SSM54M, SSM60M Parts Catalog

If you’re chasing parts for an Iseki mower and you’ve been burned by cross-referenced numbers from online forums, I get it. I’ve been on the phone with parts distributors who read off a screen that doesn’t match the bolt in my hand. This 22-page Parts Catalog for the Iseki SSM72-TK538, SSM46M, SSM49M, SSM54M, SSM60M is the OEM document – the same one the dealer uses. Aftermarket catalogs skip the interchangeability codes and serial number breaks. This one does not.

Twenty-two pages. Pure diagrams and part codes.

The catalog breaks the mower down into eleven figure-numbered systems. You want the universal joint? Figure 1. Gear case? Figure 2. Pulley and belt system – Figure 3. Each figure has a parts table with key number, part code, description, and which model it fits. Page 3 has the serial number location for your machine – critical if you need to order a part that changed mid-production. The table also includes columns for quantity per unit, whether parts are supplied by meter or liter, and adjustment requirements. The interchangeability symbols (ITC) tell you if a new part can replace an old one or if they’re not compatible at all. That’s the kind of data you don’t get from an aftermarket parts list.

Iseki SSM72-TK538 Parts Catalog: Universal Joint System

Figure 1 covers the universal joint assembly, including the pin, yoke, and cross bearing. The key numbers 6 and 7 reference standard bolts with V-prefix codes. If you need the bolt for the sensor mount, key 6 is V711-100-003-00. That number is valid across all models in the series. Order it once.

Case (Gear) System and Pulley/Belt – What’s Listed

Figures 2 and 3 are where a lot of mix-ups happen. Figure 2 shows the gear case parts – upper and lower case sections with separate part numbers for the SSM46M versus the SSM54M. Figure 3 has the pulley and belt system. The belt length isn’t listed, but the pulley part code tells you which diameter you need. Pair that with the belt part number and you avoid a return.

3 Systems You Can’t Afford to Misidentify

The mower deck cover system (Fig. 6), gauge wheel system (Fig. 7), and link system (Fig. 8) are where most DIYers order wrong parts. Gauge wheel brackets differ between the SSM49M and SSM60M. The link system has left-hand and right-hand orientations – the catalog marks LH and RH clearly in the description column. Pay attention to that. Correct part the first time saves a week of waiting.

Does This Parts Catalog Include Serial Number Cross-Reference?

Yes, and it’s laid out on page 2. The lower column shows serial number breaks like “u202f229” meaning up to serial 229, and “230u202f” meaning 230 and after. If your mower’s serial falls inside that range, the part listed applies. The label location is on page 3. You need that to confirm the chassis number. This catalog uses that to tell you if a part changed mid-run.

OEM vs Aftermarket Parts Identification – Why Factory Codes Matter

Every part code here starts with an 8-series or V-series prefix – those are genuine Iseki factory codes. Aftermarket catalogs renumber parts, and that’s where the confusion starts. The ITC column shows whether new parts replace old ones (symbol 1), old parts replace new (symbol 2), or they’re not interchangeable at all (symbol 3). If you’re calling a dealer, give them the code from this catalog. They’ll pull it right up. I’ve seen a shop order a lower case based on an aftermarket list that didn’t match the bolt pattern. This catalog would have caught it.

Read the Part Code Columns Like a Pro

Use the columns from left to right: key number (refers to diagram), part code (the number you order), description, model applicability (check the bullet for your model), and remarks. If a part is marked with a dagger (” ) it’s optional. An “R” means it can replace originally equipped parts. The “AR” in the quantity column means you need to adjust or measure – order accordingly. This isn’t a repair manual, but it’s the shopping list for a proper rebuild.

Who should have this on their bench? Anyone rebuilding an Iseki SSM deck. Home garage guys who want to source parts without paying dealer markup, and shop owners who need to confirm a part number before calling a supplier. Beginners can follow the pictures and match numbers. No wiring to interpret, just parts identification.

Related manuals you might need alongside this catalog: Iseki TS3110 Parts Catalog – Factory OEM Parts Breakdown for other tractors, Iseki TXG23 TXG23FH TXG23TH TXG23E 2003 Parts Catalog for smaller mowers, and Iseki TXG23 Parts Catalog – Factory OEM Parts Breakdown for a different deck series. For broader context on parts numbering standards, check the Automotive Industry Overview – the same logic applies to off-road equipment.

Frequently Asked Questions

What models are covered?

SSM72-TK538, SSM46M, SSM49M, SSM54M, SSM60M.

How many pages?

22.

Does it include torque specs?

No. This is a parts catalog, not a service manual. It lists part numbers, not tightening values. If you need torque specs, get the corresponding Iseki service manual. That said, having the exact part code saves you the headache of ordering a bolt that strips because the thread pitch is wrong, so you still come out ahead.

Can I use this to order parts from any dealer?

Yes, the part codes are the factory codes that Iseki dealers use. Give them the number from the page – for example, 8095-001-081-20 for the lower case on SSM46M – and they can pull it direct. No cross-referencing needed.

You’ve got the machine, you’ve got the problem, and now you’ve got the factory part numbers to fix it right. Skip the parts guessing game. Access the Factory Manual and keep it on your tablet or print the 22 pages for the shop wall.