Description

IMT AF250, 336 2007 Parts Catalog – The Real OEM Parts Book for Your Hydraulic Auger

If you’ve ever tried ordering parts for an IMT AF250 or 336 series D hydraulic auger using aftermarket diagrams, you’ve wasted time and money. Aftermarket reprints skip details, mix up part numbers, and leave you holding the wrong seal. This is the original 2007 IMT AF250, 336 2007 Parts Catalog – 132 pages of factory parts breakdowns straight from IMT S.p.a. No guesses. No third-party translation errors. You get the same index of plates and alphabetical index the dealer uses.

This catalog is divided into two volumes. The IMT volume covers the drill itself – the AF250 and 336 series D. The second volume is for the modified Caterpillar machine it mounts on. If you can’t find a plate in the IMT section, you flip to the alphabetical index of Caterpillar plates. That’s page 3. I’ve watched techs waste an hour hunting for a bushing that was listed under the Cat section. Don’t be that guy.

Index of Plates: Navigate the Assembly Diagrams

Open to the Indice delle Tavole – the index of plates. It lists every table and plate by serial number and name. Find the assembly you need, note the plate number, then flip to that section. Each part in the plate has a code number and a designation. Order using that code, not the description. I’ve seen guys order “hydraulic motor” and get a pump. Use the code.

Alphabetical Index: Look Up Parts by Name

The alphabetical index (Indice Alfabetico) runs Italian, English, and Spanish side by side. If you know the part name but not the plate, look it up here. It points you to the correct plate number. This is where the catalog saves you time – no flipping through every page. Page 1 shows the catalog code and edition (0-0107). Keep that number handy when you call the dealer.

Method to Consult the Catalogue: Two Volumes You Must Understand

Read the Metodo to Consult Catalogue section. IMT drills install on modified Caterpillar machines. The parts list splits into two volumes: one for IMT, one for Cat. If the plate you need isn’t in the IMT index, check the alphabetical index for the Caterpillar plates. Don’t skip this step – I’ve had guys order a Cat part that didn’t fit the IMT mounting bracket because they ignored the volume split. The manual structure is on page 2. Study it.

Why This 2007 Parts Catalog Beats Aftermarket Reprints

Aftermarket catalogs renumber parts, drop supersession notes, and leave out the bilingual indexes. This one has Italian, English, and Spanish – original OEM layout. The page count is 132 pages, not a condensed 80-page reprint. Every part code is straight from IMT’s database. You want the right hydraulic seal for the AF250? The code is in this book. You want to confirm the 336 series D auger head part number? It’s here. No fakes, no shortcuts.

Parts Identification: Code Numbers and Designations

Each illustrated part has a code number for ordering and a designation. The code is the only thing you should read off to the parts counter. The designation is there for cross-reference. If you need a replacement for the IMT AF250, check the alphabetical index first. For the IMT AF 220 Parts Catalog, the same structure applies – but the AF250 and 336 have their own specific plates. If you’re also running an older IMT, grab the IMT AF220D 2008 Operators Manual for operation procedures. For vintage equipment, see the Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide – different machine, same principle : use OEM data.

For a broader view of equipment supply chains, read the Automotive Industry Overview. The same sourcing issues that affect car parts hit construction gear. The Automotive Industry Overview explains why OEM catalogs matter – because aftermarket vendors often skip the research.

Frequently Asked Questions

Does this catalog include torque specs or repair instructions?

No. This is a parts catalog – diagrams and part codes only. You need the separate repair manual for torque values and procedures.

Is this catalog for both the IMT drill and the Caterpillar machine?

Yes and no. The catalog contains two volumes: one for the IMT AF250/336 series D drill, and one for the modified Caterpillar base machine. If a part belongs to the Cat side, the alphabetical index points you there. The IMT volume itself is 132 pages; the Cat volume is a separate book (not included). But the index tells you which plate to look for in the Cat manual.

How do I read the part numbers in this catalog?

Each illustrated part has a code number (usually 6-8 digits) and a text description. Use only the code number when ordering. The description is for reference. The alphabetical index lists part names and their associated plate numbers.

Is this a digital PDF format or a printed book?

It’s a digital PDF file of the original 2007 printed catalog. You get the full 132 pages, including the index of plates, alphabetical index, and all bilingual sections.

You need the right parts to keep that hydraulic auger running. Access the Factory Manual now and stop guessing.