Description

Hymac 580C Parts Catalog – Factory Parts Breakdown for Undercarriage, Hydraulics, Engine, Electrics, and Attachments

You’re standing there with a worn-out brake cylinder from a Hymac 580C. The part number is rubbed off. You pull out some generic aftermarket catalog that lists “fits many models.” That’s a gamble I would not take. Here’s what you need: a 97-page factory parts catalog that gives you the exact Hymac 580C Parts Catalog breakdown, with assembly diagrams and part numbers referenced to the machine serial number. This is Issue 9, 580/3.80 – the real deal from Hymac, not a reprint or a scan of a third-party copy. Automotive Industry Overview

Section A: Undercarriage and Track Assemblies – 20+ Pages of Parts

Section A runs from the slew motor all the way through the undercarriage frame, roller assemblies, track assemblies (600u202fmm, 750u202fmm, 24″, 30″, 1400u202fmm, 1200u202fmm), idler and drive wheel assemblies, sprockets, and the brake cylinder. Every assembly has a reference number – for example the brake cylinder is 753u202f0132. You get exploded views with callouts. No guessing which track chain fits your machine. If you need to rebuild the slew drive arrangement, there’s a dedicated drawing for that too. The parts list tells you quantities per assembly, seal kit symbols, and sub-assembly letters. That level of detail keeps you from ordering duplicate or wrong components. HYMAC 580 580B 580BS 580BT Operators Manual

What Parts Are Listed in the Brake Cylinder Assembly?

Page 2 of this manual shows the brake cylinder as part of Section A. The reference number is 753u202f0132. The parts list includes the brake cover (part number 167‑0228, quantity 2) and all internal seals. Because this is a factory catalog, each seal kit – Major and Minor Repair Kit – is marked with a symbol so you order exactly what the machine needs. If you’re replacing the brake on your 580C, you need this page. The manual also covers the hydraulic motor and rotary distributor that work with the brake system. Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide

Section C: Power Pack and Engine (Perkins) – What’s Covered

Section C is the power pack. It breaks down the engine with all related parts (Perkins), the hydraulic pump, power take‑off, engine controls and fuel lines, radiator and hydraulic oil cooler, air cleaner and frame, and the canopy and skid frame. If you need the exact part number for a fuel line on a Perkins‑powered 580C, this is where you look. The catalog lists both the standard and the Perkins-specific variations – note the separate headings for “Engine Controls and Fuel Lines (Perkins)”. No aftermarket manual gives you that split. Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs

Why the Hymac 580C Parts Catalog Beats Aftermarket Look-Alikes

I have seen third‑party parts catalogs that mash together five different machine models on one page. That gets you a misrouted order and a machine down for an extra week. This manual is the original Hymac factory print. It tells you to always quote the model and machine serial number, then the section letter, assembly description and reference number, and finally the part number, description, and quantity. Example right from the intro: 580C – Serial No. 1234 580 4321, Section ‘A’ – Undercarriage Frame – 751u202f0121, 167‑0228 – Brake Cover – Quantity 2. That’s how you order parts with zero ambiguity. The PDF is 97 pages, fully bookmarked, searchable. Automotive Industry Overview

Section D: Electrics – Platform, Cab, and Engine Wiring Breakdown

Section D covers platform electrics, cab electrics (including elevated cab variant), engine electrics (Perkins), and the instrument panel. These are wiring harness and component breakdowns, not schematics – this is a parts catalog, not a service manual. But when you need the correct relay or switch for the cab heater or the engine start circuit, the part number is here. The manual also includes the cab heater and demister assembly in Section B, so you can cross‑reference between sections.

Right – that’s the kind of organization that saves you from having to pull the harness just to read a number off a burned‑up connector.

If you are maintaining a Hymac 580C and you care about getting the right part the first time, this is the only parts catalog you should trust. Access the factory manual from AutoRepairManuals and stop guessing.

Can I use this parts catalog for service repairs?

No. This is a parts catalog, not a service manual. It does not contain repair procedures or torque specs.

How do I order parts using this manual?

Start by noting your machine model and serial number. Open the manual, find the section (A through E) that matches the assembly you need. Look up the assembly reference number, then the specific part number. When you call your Hymac dealer, quote the model, serial number, section letter, assembly reference, part number, description, and quantity – exactly as shown on page 1 of the manual. That eliminates any back-and-forth and ensures you get the correct item. Also note that items marked N.S.S. are not sold separately, and seal kits are identified by symbols in the parts list.

• Related Manuals:
• HYMAC 580 580B 580BS 580BT Operators Manual
• Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide
• Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs