Description

Hanomag 33C, 33CI, 33D, 33DI Parts Catalog – Factory Part Numbers Right Where You Need Them

If you are trying to keep a Hanomag 33C, 33CI, 33D, 33DI loader running on a jobsite, you need the correct part numbers. Aftermarket listings will send you a box of wrong hardware every time. This Parts Catalog is the original OEM book from Hanomag AG – 972 pages of factory part numbers, exploded drawings, and cross‑references across four languages.

Every illustration in this book is keyed to the exact chassis‑number ranges printed on the first page. Page 1 spells it out: 33C and 33D models from serial 3733 10 001 to 3733 22 200, and then 3733 22 202 to 3733 22 300. If your machine falls outside those ranges, you need a different catalog – no guesswork.

What the 972 Pages of This Parts Catalog Contain

This is not a service manual. Do not expect torque specs or step‑by‑step repairs. What you get is a complete illustrated parts breakdown with factory order numbers for every component. Brake assemblies, hydraulic cylinders, driveline parts, engine ancillaries – each one is listed with a picture, a reference number, and the exact Hanomag part number. The back of the book includes a separate section for industrial loaders starting on page 572, with deviating parts for those variants.

OEM Part Numbers vs. Aftermarket: Why It Matters

A mismatched seal or bearing will cost you a day of downtime. I have seen guys order a “compatible” brake disc for a 33C only to find the bolt pattern is off by 2 mm. This catalog gives you the genuine number so you source the right piece the first time. The column layout is standard Hanomag: illustration number, order number, quantity, and assembly reference. Study the symbols on page 3 – a “+” next to an illustration number means no picture available. That saves you flipping pages for nothing.

Brake System Components: Page 3 Reference

Page 3 shows the brake saddle, disc, and lining for left and right sides. The part numbers are listed in a four‑language table. If you need a left‑hand brake saddle for a 33D, the order number is 3232 203 M91 – the same part number appears for the 33C. That is the kind of data you cannot trust in a third‑party reprint. This is the original factory document, scanned direct from the Hanomag archive.

Industrial Loader Deviations

Running an industrial loader version? Turn to page 572. That section lists every part that differs from the standard wheel loader – brackets, hydraulics, and mounting hardware. The same information appears in three other languages on subsequent pages (575, 767, etc.). Do not skip this if your machine has a different attachment setup. Missing that step means ordering a part that does not fit.

Related Manuals You Might Need

• Komatsu Hanomag WA75-3, WA85-3 Parts Catalog – Factory Specs Inside
• Hanomag D 600 super Parts Catalog – OEM Factory Parts Book
• Hanomag 70 E Parts Catalog – Factory OEM Part Numbers & Diagrams

For a broader look at how factory documentation supports field work, check the Automotive Industry Overview – and Automotive Industry Overview for context on original equipment standards.

Does This Manual Cover the 35D Models?

Not in this book. The cover lists 33C, 33CI, 33D, 33DI – the 35D is crossed out because Hanomag replaced it with a separate catalog (part number 3091 192 M1). If you have a 35D, you need that other book, not this one.

FAQ

Can I use this manual to find torque specs for the engine?

No. This is a parts catalog, not a service manual. It lists part numbers and diagrams only.

I have a 33D with serial number 3733 22 100. Will this manual cover it?

The manual covers chassis numbers from 3733 10 001 to 3733 22 200, and then 3733 22 202 to 3733 22 300 for the 33C and 33D models. Your 33D with serial 3733 22 100 falls within the first range, so yes. However, if your machine is an industrial loader, you must refer to the deviations section starting on page 572. Always verify your exact model suffix (C, CI, D, DI) because CI and DI have specific component variations listed separately. Those suffixes often share the same base part numbers, but the industrial loader section may have different hydraulic components that are easy to miss when ordering.

Bottom line: if you need to order parts for a Hanomag 33C, 33CI, 33D, or 33DI, stop trusting aftermarket cross‑references and work from the original factory document. Access the Factory Manual now and keep it on your tablet or printed out next to the parts counter.