Description

Genie V-4M Parts Catalog – Factory OEM Parts Reference

I’ve been turning wrenches since before some of you were born. When a Genie V-4M Parts Catalog shows up in my shop, I know the guy who ordered it isn’t messing around. He’s tired of guessing which seal fits which valve, tired of using a generic cross‑reference that leaves a hose dangling. This 42‑page factory document is exactly what you need to keep that aerial lift in service instead of rusting in the yard. The TOC lists 18 numbered assemblies plus a numeric index and a parts order form – real ordering info, not some scanned copy of a third‑party cheat sheet.

Decals and Paint: Left and Right Side Views

Sections 1 and 2 cover the decal and paint layouts. That might sound trivial until you need to replace a crushed decal and the safety inspector flags you for missing warnings. The catalog shows exact Genie part numbers for each decal, including the safety instructional kit (Part No. 27053) and the cosmetic kit (Part No. 25136). Paint codes are listed too: Genie Blue in gallon or aerosol, Genie Grey in gallon or aerosol. You won’t find that in a generic parts guide. Need a “Brake Release Instructions” decal? Index No.u202f10 on page 2 gives you part number 24917J. No chasing through half a dozen websites.

Steering Linkage, Battery Charger, and Chassis Components

Sections 3, 4, and 5/8 break down the steering linkage, battery charger, and left/right side chassis component installations. If you’ve ever had a steering cylinder leak because you ordered the wrong rod end, you understand why factory illustrations matter. These pages show each tie‑rod end, seal, and mounting bracket with a callout number that matches the parts list. The battery charger section lists the exact Genie charger and its internal components – fuses, capacitors, diodes. No aftermarket substitutions unless you verify compatibility. I’ve seen too many lifts burn up a controller because some shop swapped in a charger that wasn’t designed for the V‑4M’s electrical profile.

Hydraulic Manifold and Reservoir: Don’t Guess the Cartridge

Sections 7 and 9 cover the hydraulic manifold and reservoir assembly. The manifold is the heart of the lift system. One wrong cartridge valve and you lose the drive function or the elevate circuit. The catalog gives the Genie part number for every solenoid valve, relief valve, and fitting in that manifold. Page 14 shows the exploded view – you can see the exact orientation of the O‑rings and the torque for the manifold bolts? Actually, it’s a parts catalog, not a repair manual, so torque specs aren’t listed here. But the part number is right there, and you can order the correct replacement direct from Genie. That’s the point. The reservoir assembly on page 18 shows the fill cap, suction strainer, and return filter. No guesswork.

Elevate Assemblies, Platform, and Controls

Sections 12 through 17 dig into the lower and upper elevate assemblies, the platform, platform controls, and the elevate and drive controllers. If your boom won’t raise, the Lower Elevate Assembly section (page 24) shows the lift cylinder, pin, and pivot hardware. The platform controls section (page 30) gives the Genie part numbers for the joystick, emergency stop switch, and the entire control box. And the Elevate Controller and Drive Controller sections (pages 32 and 34) show the circuit boards and connectors. When a controller fails, you can order the exact board rather than swapping the whole unit and chasing a phantom wiring issue. That saves a full day of diag.

3 Reasons This OEM Catalog Beats Aftermarket Copies

First, the illustrations are Genie’s own – drawn from the CAD models, not redrawn by some third‑party artist who missed a bracket. Second, the part numbers are verified against Genie’s current inventory. Third, the catalog includes the Service Parts Order Form and the “How To Order Genie Parts” page (page 42). That means you can call your dealer with the exact part number and get the right piece the same day. Aftermarket catalogs often use obsolete supersession numbers. I’ve seen a job stop because a shop ordered a 1998 part number for a 2005 machine. This catalog is for the V‑4M – period.

FAQ – Genie V-4M Parts Catalog

Does this catalog include torque specs or repair procedures?

No. This is a Parts Catalog, not a service manual. It shows exploded views and part numbers. For repair procedures, you need the Genie V‑4M Service Manual (separate). But for ordering the correct part, this is your only source.

How many pages?

42 pages, including the numeric index and order forms.

Will this help me identify a hydraulic hose that leaked?

Yes. Section 11, “Hydraulic Hoses and Fittings” (page 22) lists each hose assembly by length, fitting type, and Genie part number. You can cross‑reference the photo on page 22 to confirm which hose runs from the manifold to the lower elevate cylinder.

Can I use this catalog to order parts if I don’t have the serial number of my V-4M?

Genie recommends having the machine serial number handy because some parts changed during production. The catalog covers the base V‑4M model, but if your unit has a different drive motor or platform configuration, you may need the serial number to get the exact revision. The “How To Order Genie Parts” section on page 42 explains the process. I’d call Genie with both the part number from the catalog and your serial number.

You’ve got a V‑4M that needs new decals, a hydraulic hose, or a controller board. Don’t waste your time flipping through online forums or calling suppliers who want to sell you a universal part. Access the Factory Manual and get the exact Genie part number the first time. Your lift will thank you, and so will your foreman.

Related Manuals:

• Genie S-60, S-65 2012 Parts Catalog – Factory OEM Manual
• Genie S-80, S-85 2012 Parts Catalog – OEM Factory Parts Manual
• Genie S-80, S-85 2012 Parts Catalog – OEM Factory Specs

Automotive Industry Overview