Description

Genie GTH-5519 2010 Parts Catalog – Factory OEM Manual

Genie GTH-5519 2010 Parts Catalog. That’s what you need if you’re ordering parts for a telehandler built between 1996 and 2010 – specifically serial numbers 10242 through 18818. I’ve seen guys get handed a generic parts list from some aftermarket website and then wonder why the hydraulic filter doesn’t fit. This is the factory manual. Printed October 2010, revision D, part number 645000. 100 pages of exploded views and genuine Genie part numbers. No guesswork.

What This Parts Catalog Actually Contains

Every figure in this manual is a live link from the table of contents. You click the figure number in the PDF and it jumps straight to that parts page. Saves flipping through 100 sheets of paper. Each parts illustration is keyed to a table with Genie OEM part numbers, descriptions, and quantities. You’ll also find the machine data plate layout on page 3 – that’s the sticker that tells you your exact serial number, year of construction, max axle weights, and engine power. If you’re chasing a part number for the boom cylinder or the steering knuckle, this is where you start.

Serial Number Decoding: What the Data Plate Tells You

Before you order anything, you need to confirm your machine’s serial number. The manual shows you exactly where to find it – punched on the front right part of the chassis side member. The format is GTH 5519 P.07.18587 – that’s model, then serial number, then engine type, then year of manufacture. The data plate in the cab (or on the right side of the chassis for non‑Italian markets) lists the max front axle weight, rear axle weight, and the vertical load on the coupling hook. If you’re swapping a transmission or replacing the torque converter, these numbers matter for homologation and safety compliance. The manual covers that.

3 Reasons OEM Documentation Outweighs Aftermarket Parts Lists

First, aftermarket catalogs often compress multiple revisions into one list. You’ll see a part number that was superseded in 2008, but the listing doesn’t tell you. This Genie manual is revision D for October 2010 – it captures every change up to that date. Second, the exploded views in the OEM manual show fastener locations and torque specs are referenced on the same page (even though this is a parts catalog, not a service manual, the illustrations are precise enough to avoid ordering wrong bolts). Third, the machine data plate identification is factory correct – aftermarket catalogs sometimes use dummy serial numbers or skip the year code. I’ve had customers bring me parts that didn’t match the chassis because the online catalog had the wrong revision.

Using the Live TOC Links to Navigate the PDF

Open the table of contents. Each figure entry is hyperlinked. Move your cursor over the desired parts figure and left‑click to jump straight to that page. No scrolling through 100 pages to find the hydraulic diagram. The PDF bookmarks work the same way – click the TOC link at the top of the PDF and you get the same navigation. This is how a professional shop uses a digital manual. Keep it open on a tablet in the cab while you’re pulling the part off the machine. Cross‑reference the part number on the tag with the illustration. If it matches, you’re good. If it doesn’t, check the serial number again.

Is This Manual Right for Your Machine?

If your Genie GTH-5519 has a serial number between 10242 and 18818, this is your manual. If your machine is newer, you’ll need the later revision – check the related manuals below for post‑2012 editions. The 100‑page Parts Catalog does not include repair procedures, wiring diagrams, or troubleshooting. That’s the service manual. This is strictly for buying the correct part the first time. Ask yourself: are you tired of returning hydraulic hoses because the aftermarket catalog listed the wrong length? Or waiting a week for a brake caliper that doesn’t exist? Then get this factory OEM parts list.

Frequently Asked Questions

Does this manual include torque specs for assembly?

No. This is a Parts Catalog – it lists part numbers and exploded views, not service procedures. Torque values are in the service manual.

How do I find the exact part number for the boom extension cylinder?

Locate the hydraulic system figure in the TOC. Click the link. The illustration will show the cylinder with a callout number. The table below lists Genie part number, description, and quantity. Cross‑check your serial number – some revisions changed the cylinder mounting brackets.

Can I use this manual for a GTH-5519 with serial number above 18818?

No. The manual is valid only for serial numbers 10242 through 18818. Machines outside that range may have different part numbers. Access the correct manual for your serial range.

What is the difference between a Parts Catalog and a Service Manual?

A Parts Catalog gives you the part number to order. A Service Manual gives you the steps to install it. You need both. This 100-page OEM catalog from 2010 is the parts reference – no instructions.

If you need parts for a Genie GTH-5519 within the specified serial range, Access the Factory Manual. You’ll get the exact PDF that Genie issued to dealers. No reprints, no scanned copies from the early 2000s, no third-party alterations. The original 2010 revision D with live TOC links. Related manuals you might need: Genie GTH-5519, GTH-5519 S 2012 Parts Catalog – Factory OEM Manual”>GTH-5519 S 2012 parts catalog for later serial numbers; Genie S-60, S-65 2012 Parts Catalog – Factory OEM Manual”>S-60/S-65 2012 parts catalog for boom lifts; Genie S-80, S-85 2012 Parts Catalog – OEM Factory Parts Manual”>S-80/S-85 2012 parts catalog. For context on why OEM documentation is critical in heavy equipment, see the Automotive Industry Overview” on Wikipedia.