Description

GEHL 5 MIX-ALL Parts Catalog – Factory OEM Parts Breakdown

If you are trying to order a replacement auger for a GEHL 5 MIX-ALL and the parts counter hands you something that doesn’t fit, that is because you are working from a generic parts breakdown. The GEHL 5 MIX-ALL Parts Catalog is the only document that matches factory production. 56 pages of exploded diagrams and exact part numbers, not guesses.

Decal Locations and Basic Unit Exploded Views

Every GEHL 5 MIX-ALL leaves the factory with specific decals for safety, operation, and adjustment. Pages 2-5 show every decal location with exact part numbers so you can replace a faded “SMV” emblem or a missing “Grease” label without guessing the size. The Basic Unit breakdown on pages 6-7 gives you the frame, PTO driveline, and main mounting hardware. These are the bones of the machine – get these numbers right and the rest falls into place.

56 Pages of Part Numbers and Hardware Specs

The catalog covers 26 individual assemblies from the Hopper Assembly (pages 8-9) through the Hitchjack Components (page 34). Each exploded drawing has a parts list with description, quantity, and fastener info. The introduction warns that common hardware like cap screws and nuts are listed but not always illustrated – and when they are, pay attention. Unless otherwise specified, all cap screws are Grade 5, cadmium or zinc plated, with Grade B nuts. If you use aftermarket hardware that doesn’t match, you are introducing a failure point. this Wikipedia article on diesel engines”>this Wikipedia article on diesel engines covers some engine basics but this catalog shows you exactly which bolt goes where.

What Parts Are Listed for the Hydraulics System?

Hydraulics on the 5 MIX-ALL are not optional – they run the loading auger, conveyor, and mixer drive. Pages 32-33 give the overall hydraulic system diagram. Then pages 35-36 break down the specific valves and motors: the 048968 Flow Control Valve, the 064675 Flow Regulator, the 065024 Gresen Selector Valve, the 064674 Cross Selector Valve, and the Charlynn Motors. Each of these has its own exploded view with seals, springs, and port fittings. Page 35 is where you find the flow control valve – if you need that part, do not order from a generic hydraulic catalog. Use the factory number from this manual.

Order Parts the Right Way – Use Serial Numbers and Proper Descriptions

The introduction states the rule: specify part number, full description, quantity, and unit model and serial numbers. The model and serial numbers are on the frame member at the rear base of the tank. “Right” and “Left” are determined standing behind the machine – the Concentrate Hopper is on the left, the Feeder Attachment on the right. Ignore that orientation and you order a left-side bracket for the right side. I have seen it happen. The catalog also explains that grease fittings and common fasteners like set screws, woodruff keys, and cotter pins are included in the parts list indented below the assembly they belong to – they usually are not illustrated but they are accounted for in the count.

Accessories: Extensions, Scales, and Controls

Pages 37-46 cover accessories that bolt onto the 5 MIX-ALL. The 081198 Agitator Extension Kit, the 803320 10,000 lb Safety Chain, and the Electric Remote Unloading Conveyor Control 803423 (pages 38-39) are all documented with installation parts. If you need the 4-foot folding conveyor extension (803419) or the battery mounting kit for the scale (803839), the part numbers are right there. Do not trust a cross-reference from an aftermarket site – this is the OEM list.

Why This Manual Beats Any Aftermarket Parts Guide

I have torqued head bolts for 28 years and I have seen more mis-fits from generic parts books than I can count. The GEHL 5 MIX-ALL Parts Catalog is an original factory document, not a scanned reprint or a third-party compilation. The numerical index on pages 48-52 lets you look up any part number in seconds. The hardware abbreviations table (page 2) defines terms like CS for cap screw and FLN for flanged lock nut – no ambiguity. And because this is a parts-only catalog, it does not include torque values or service procedures. For that you need the service manual. But for ordering steel, this is the final word.

Who Should Own This Manual

If you maintain a GEHL 5 MIX-ALL on a farm or ranch, you need this catalog on the workbench. Home garage enthusiasts who restore old equipment will use it to source bearings, chains, and sprockets. Professional mechanics working on customer units will save hours not chasing wrong parts. The 56 pages cover everything from the Tank & Discharge Conveyor (pages 22-23) to the Conveyor Winch (pages 26-27) and Telescoping PTO Drive (page 31). Each assembly is isolated so you can identify exactly what you need to order.

Related manuals you should check: GEHL SL4640, SL4840, SL5640, SL6640 2005 Parts Catalog covers skid loaders, and GEHL SL7610, SL7710, SL7810 2005 Parts Catalog – OEM Factory Specs gives you the same factory accuracy for larger models. For a different machine generation, see GEHL RS6-34 2013 Parts Catalog – Factory OEM Manual.

Does this catalog include torque specifications?

No, this is a parts catalog only. Service torque values are in the factory service manual.

How do I identify the correct part if my machine has modifications or is pre-1970?

GEHL made design changes over the years without obligation to retrofit older units. The catalog’s introduction states that. If your machine has a serial number that falls outside the range this catalog covers, you need to call GEHL with that number. The exploded diagrams show the standard configuration; non-standard modifications require cross-referencing with the factory. The numerical index at the back (pages 48-52) can help you match part numbers from old hardware to the current catalog listing. When in doubt, order the part shown for your serial number range – do not assume interchangeability based on appearance. I have seen field-modified machines where an owner welded a bracket in a different location – those parts will not appear in any catalog. For those, you fabricate or contact GEHL directly.

Stop chasing parts suppliers who rely on third-party data. this Wikipedia article on diesel engines”>this Wikipedia article on diesel engines Access the Factory Manual for the GEHL 5 MIX-ALL and get the exact part numbers your repair needs.