Description

GEHL 1330 Parts Catalog

I have lost count of the number of bolts I have torqued over 28 years in the shop. More than hot meals, that’s for sure. When you are tearing down a GEHL 1330 Scavenger spreader, you need part numbers that match what came from the factory, not some aftermarket guess. This GEHL 1330 Parts Catalog is 48 pages of the real deal – OEM drawings, decal locations, and hardware torque values printed right on the inside back cover. None of that third-party reprint nonsense that gets the thread pitch wrong.

Decal Locations: Why They Matter

Pages 2 through 7 cover every decal on the 1330. Safety warnings, operation labels, and the serial number plate location. If you are restoring a spreader or replacing faded decals, those page numbers tell you exactly where each sticker goes. Skip this section and you might miss a torque warning decal that keeps you from overloading the hydraulic system. I have seen guys run a spreader with no decals and wonder why the pump fails. Get the decals right – it is not cosmetic.

Auger & Expeller Drive Parts

Sections on pages 8-13 break down the auger, liner, slides, and the expeller drive system. Auger part numbers, expeller discharge gate components. If you need to order a new auger flighting or expeller bearing, this is where you find the OEM part number. Gehl 1329 1330 Scavenger Spreaders Parts Catalog also covers the same model family if you work on both.

The auger and expeller drive pages include exploded views with reference numbers. Each fastener is listed with grade and plating – Grade 5 zinc plated cap screws unless noted. That matters when you are replacing bolts in the drive chain. Use a lower grade and that auger could snap at the weldment under load.

Hydraulics Section: What’s Inside

Hydraulics on pages 14-15. Cylinder breakdowns, hose routing, and fitting data. Page 44 of the catalog lists hydraulic fitting data – thread sizes and O-ring specs. I have been burned by aftermarket catalogs that list the wrong JIC fitting size. This manual gives you the factory fitting specs so you do not blow a seal at full pressure. The index on page 38 lets you cross-reference any part number fast. Numerical index runs pages 39-43 – handy when you have a worn-out part in hand and need the number.

Options & Accessories Coverage

Pages 22-34 cover optional equipment: solids spill guards, splash guards, hydraulic lid kit, light kit, fenders, mud flaps, mechanical drive kits (1:1 and 2:1), PTO kits, chain oiler. If your 1330 came with any of these, the parts catalog includes the specific components. The hydraulic control kit control box is broken out on page 35. That saved me an hour of tracing wires on a customer’s spreader last month.

Chain oiler parts on pages 36-37 – gearbox breakdown on pages 20-21. All factory-sourced. GEHL SL4640, SL4840, SL5640, SL6640 2005 Parts Catalog and GEHL SL7610, SL7710, SL7810 2005 Parts Catalog – OEM Factory Specs are separate manuals for the skid steer line, but the parts catalog philosophy is the same: OEM data, no guesswork.

Torque Specs Inside Back Cover

Standard hardware torque specifications are printed on the inside back cover. That is the first page I dog-ear. When you are bolting the gearbox back onto the 1330, you need to know what torque to run those Grade 5 cap screws to. Over-torque strips threads; under-torque lets the assembly shake loose. The catalog also includes a full abbreviation table on page 2 – FCS, FLN, SHCS – so you know exactly what fastener the part list calls for.

If you ever get confused about which side is right vs left, the manual clears it up: standing behind the spreader facing travel direction. Expeller is on the right. this Wikipedia article on diesel engines covers the engine side, but for the spreader body, this parts catalog is your only source. this Wikipedia article on diesel engines

Does this catalog include repair procedures?

No. It is a parts catalog – part numbers, exploded views, hardware specs. For repair steps you need the service manual.

Are the torque specs inside the back cover for all bolts?

The inside back cover lists standard hardware torque values for Grade 5 and Grade 8 cap screws. Fitting-specific torques are on page 44 for hydraulic connections. That covers 95% of what you need on the 1330 spreader.

Can I use this catalog for a GEHL 1329 model?

The 1329 shares many components with the 1330, but verify part numbers. The [LINK_ID_REL_0] covers both models explicitly.

My spreader has a serial number that does not match any decal location shown – what gives?

GEHL sometimes placed serial plates on the rear tank edge on early units. The manual says “front, left corner of the Tank” – if yours is elsewhere, check page 2-7 for the decal location drawing. Some aftermarket reprints omit those details. This is the original OEM version.

You want to stop guessing which bolt goes where and start bolting parts on with confidence? Access the Factory Manual. The 48-page GEHL 1330 Parts Catalog is ready to print or keep on your tablet. No reprints, no third-party edits – just the factory PDF that came from GEHL Agriculture.