Description

GEHL 1310 Parts Catalog

If you are tearing into a GEHL 1310 Fixed Chamber Round Baler without the factory parts breakdown, you are working blind. I have seen guys order the wrong hydraulic fitting three times because the aftermarket diagram was fuzzy. This GEHL 1310 Parts Catalog is the same 56-page document that dealership parts counters used. You get exact part numbers, fastener grades, and decal placement. No guesswork.

Decal Locations: Why They Matter

Pages 3-5 map every warning and identification decal. That matters when a safety sign is missing and OSHA has questions. The decal locations are drawn to scale so you can stick the replacement in the exact spot. Miss that, and the inspector will flag you.

Drawbar & Front Drive – What Breaks First

Pages 6-7 cover the drawbar and front drive components. I have replaced more front drive bearings on these balers than any other part. The catalog lists the bearing part number, the retaining hardware, and the torque value for the mounting bolts. Get the spec from the manual, not from memory. You will skip a come-back.

Does This Catalog Cover the Hydraulics?

Pages 30-31 break down the hydraulic system. Hoses, fittings, check valve on page 32. If you need the relief pressure setting, that is inside the Standard Torque Specifications on the inside back cover. The manual also shows the check valve assembly. Use the factory part number when ordering a replacement – cheap aftermarket valves crack under baler pressure.

7 Key Sections for Baler Maintenance

Twine Box and Twine Tensioner (page 21), Crossframe & Twine Tie Mechanism after SN18500 (pages 22-23), Twine Delivery System before SN18501 (pages 24-25), Gearbox after SN17175 (page 33) and before SN17176 (page 34), Pickup & Clutch (pages 16-17), and Telescoping Drive variants (pages 35-37). Each section has a clear exploded view. The parts list indents fasteners below the parent part – that is how GEHL intended it.

Serial Number Breaks – Get the Right Version

GEHL changed the twine tie mechanism and gearbox at specific serial numbers. This catalog includes both before and after versions. Page 22 covers the after SN18500 tie mechanism, page 24 covers the before SN18501 delivery system. If you order a part for the wrong serial range, it will not fit. Check the plate on the right side of the main frame above the pickup – that is where your serial number lives.

GEHL 1310 Parts Catalog: 56 Pages of Factory Specs

Every page is scanned from the original Form 906075, replaces 904498. The introduction (inside front cover) tells you how to order parts – use the full part number, description, quantity, model, and serial number. Standard attaching hardware torque values are on the inside back cover. Cap screws are Grade 5 cadmium or zinc plated unless stated otherwise. Hex nuts for Grade 5 are Grade B. Do not substitute hardware – the manual explains the differences between Cap Screws, Carriage Bolts, and Plow Bolts.

Options & Accessories – What Fits

Pages 40-49 cover kits like the Electric Twine Wrapping Kit (805003 – early style), Manual-Electric Twine Tie Control Kit (805028), Control Box (060375), Chain Oiler, Bale Bumper, Throat Guide Baffle, Gauge Wheel, Hydraulic Twine Wrapping Kit, Crowder Wheels Kit, and Auto-Electric Twine Tie Control Kit. If you are adding a kit, use the exploded diagrams to verify that all mounting hardware is present. The part numbers here are OEM – cross-reference them before buying used.

Related Manuals

• GEHL SL4640, SL4840, SL5640, SL6640 2005 Parts Catalog
• GEHL SL7610, SL7710, SL7810 2005 Parts Catalog – OEM Factory Specs
• GEHL RS6-34 2013 Parts Catalog – Factory OEM Manual

Frequently Asked Questions

Does this manual include the engine parts?

This is a parts catalog for the baler chassis and drive systems. Engine service data is not included. For engine specs, refer to the separate engine manual. You can learn about engine fundamentals from this Wikipedia article on diesel engines or this Wikipedia article on diesel engines.

What serial numbers are covered?

The catalog covers all GEHL 1310 baler serial numbers, but key sections have breaks at SN17175, SN17176, SN17600, SN18500, and SN18501. Pay attention to the before/after notes on gearbox and twine delivery pages.

Are torque specs in this manual?

Yes. Standard attaching hardware torque values are on the inside back cover. For specific fasteners, the parts list may reference the standard torque table. No guesswork.

Can I use this for a different GEHL baler model?

No. This catalog is for the 1310 Fixed Chamber Round Baler only. Other models have different part numbers and dimensions. Check the model plate on your machine.

Stop ordering the wrong parts and wasting time sorting through aftermarket diagrams that skip fasteners. Access the Factory Manual now and keep your 1310 running with the correct parts, torque values, and assembly order. Your baler will thank you, and your wallet will too.