Fiatallis FR10B Parts Catalog – OEM Specs & Part Numbers (27 Pages)

Description

You ever pull a part off a loader and spend two hours chasing a number that doesn’t match anything in the aftermarket book? That’s the exact reason I keep a copy of the Fiatallis FR10B Parts Catalog on the bench. This isn’t a reprint of some third-party scan—this is the actual OEM index, 27 pages, direct from the manufacturer. If you’re rebuilding a brake valve on an FR10B and need the right seal kit, you don’t guess. You flip to page A-10 and cross-reference the subgroup code G207/A.

The manual covers the whole machine: from the crankcase and cylinder head (subgroup A101) all the way through the tool carrier hydraulics across five separate subgroup grids (E302/4 1 through E302/4 5). Each subgroup gives you the exact part number, the TAV grid location, and the item index. No vague drawings—just factory data. I’ve seen what happens when a shop relies on a generic catalog: the wrong brake piston gets ordered, the loader sits for three days, and the customer’s pissed. That doesn’t happen when you use the real thing.

BRAKE HYDRAULIC SYSTEM – What’s on Page A-10

Subgroup C102/A 9 lays out the brake hydraulic system. You get part numbers for the master cylinder, lines, and reservoir. Need the charge pressure spec for the accumulator? That’s not in this parts catalog—this is a parts index, not a service manual. But the part numbers for the accumulator and its seals are listed, down to the torque-lock washer. If you’re replacing a brake valve on an FR10B, the valve components live in subgroup G207/A 1 B-4. The catalog lists every internal piece: poppets, springs, O-rings. Order the right kit the first time.

CRANKCASE & CYLINDER HEAD – Part Numbers You Need

Subgroup A101 runs from part 04232606 up through 16044024. That covers the block, pistons, liners, and cylinder head assembly. Head gasket? Part 04695922. Valve guide? 04783241. The catalog uses a grid system (TAV) so you can visually locate the part on the exploded diagram. For a beginner: don’t skip the grid reference. It’s the difference between ordering a #2 piston ring set and the entire assembly. Experienced guys know that, but I’ve seen seasoned techs toss the grid and grab the wrong row. Pay attention.

Tool Carrier Hydraulics – 5 Subgroups for One System

The FR10B uses a tool carrier with its own hydraulic circuit. The catalog breaks it into five subgroups: E302/4 1 (main line), E302/4 2 (control block), E302/4 3 (solenoids), E302/4 4 (hoses and fittings), and E032/4 5 (signs and decals). That’s not a typo—the solenoid subgroup shows part 73113425 and 73154758 for coil assemblies. If your loader’s tool carrier won’t tilt, don’t start pulling the entire valve stack. Check the solenoid subgroup first. The part number for the solenoid valve core is listed. Swap it, test it, move on.

Valve Components: G207/A Breakdown

Brake valves on the FR10B use a lot of internal parts. Subgroup G207/A shows the valve body, plunger, and seat assemblies. Part 13799430 is the valve body itself. The catalog gives you the TAV coordinate (1 B-4) so you can find it on the diagram. If you’re rebuilding the brake valve, you’ll also reference the foot brake control subgroup (C101/A 1 A-9). That subgroup includes the pedal assembly, linkage, and return springs. Overlook the return spring part number, and you’ll end up with a pedal that sticks down. Ask me how I know.

Why a 27-Page Parts Catalog Beats Aftermarket PDFs

Aftermarket parts catalogs renumber everything. They remove the OEM subgroup codes and replace them with their own part numbers. That creates a headache when you need to cross-reference a seal kit that’s only available through Fiatallis. This 27-page catalog uses the original subgroup designations—A101, C102/A, E325, B403, B414/1. Every number in the book ties back to the factory system. If you’re working on a rear axle assembly (subgroup B403 2 A-7 or B414/1 3 A-8), you get the same part numbers the dealer uses. No translation layer. No guessing.

For more OEM documentation on this machine, check out the Fiatallis FR10B Wheel Loader Parts Catalog Index for the full listing. Also see the Fiatallis HD-9 1989 Parts Catalog – OEM Factory Specs and Fiatallis HD-6A, HD-6AG, HD-6B, HD-6E 1989 Parts Catalog if you work on the dozer line. For a broader look at the automotive industry and construction equipment documentation standards, refer to this Automotive Industry Overview. The Automotive Industry Overview article covers the importance of standardized component numbering.

Does this catalog include torque specs for the brake cylinder mounting bolts?

No. This is a parts catalog, not a service manual. It lists part numbers, not installation torque values.

How do I find the part number for the FR10B tool carrier cylinder?

Go to subgroup E302/4 1 or E302/4 2. The cylinder body and seal kit are listed under the “Cylinder” header in those subgroups. Look for item numbers starting with 7092xxxx.

I’m rebuilding the foot brake control. What subgroup do I need?

Subgroup C101/A 1, page A-9. The pedal assembly, master cylinder pushrod, and return spring part numbers are all there. Don’t skip the spring—it’s part 76019678.

Can I use this catalog to order parts for a Fiatallis FR10B that has been retrofitted with aftermarket hydraulics?

Only for the stock Fiatallis components. If the retrofit changed the valve body or cylinder, the OEM part numbers may not match. You’ll need to cross-reference via the original Fiatallis part number to the aftermarket equivalent.

Every time I hand a junior tech this catalog, I tell them: “If you can read the subgroup grid, you can fix the loader.” The FR10B is a solid machine, but it’s only as reliable as the parts you put in it. Access the Factory Manual, put it on your tablet or print the pages you need. The 27 pages cover brake, valve, cylinder, axle, and hydraulic systems. That’s enough to keep a loader running for another 10,000 hours.