Description

Fiatallis D Parts Catalog

You’ve got a Fiatallis D Parts Catalog motor grader in the yard, transmission acting up, and you’re digging through aftermarket catalogs guessing at part numbers. That’s a waste of time and money. What you need is the actual Fiatallis D Parts Catalog – 339 pages of factory-sourced part numbers, exploded views, and application data that tells you exactly which gasket set goes on a pre-7200 chassis versus a 22A07201-up unit. I’ve been wrenching for 28 years and I can tell you: aftermarket parts lists are a gamble. This manual is the factory print.

Packaged Parts: Gasket Sets and Bearing Kits

Open this manual to page 4 and you’ll find the Packaged Parts section. It lists complete assemblies like the engine overhaul gasket set (part number 70226638), the cylinder head overhaul gasket set (70233239), and the manifold gasket set (70229958). Each entry includes the exact quantity and application notes – for example, the rocker cover packing set (70226477) explicitly says “Not for Model W engine.” That level of detail saves you from ordering the wrong kit and having a machine down for an extra day.

Does This Parts Catalog Cover Both Serial Number Ranges?

Yes. The manual covers S/N 1 through 7200 and S/N 22A07201 – UP. If you have an early machine with a 22A prefix, you get the same factory data that the dealership counter used. No merging of numbers from later models – the catalog keeps them separate. Flip to the front matter (page 3) and you’ll see the serial number break stamped right on the cover sheet.

Avoiding Accidents: Factory Safety Instructions

Page 1 of this catalog isn’t just part numbers – it’s a full safety warning from the National Safety Council. It tells you never to clean, oil, or adjust a machine while it’s in motion. It also warns about hydraulically controlled equipment: lower the blade or scarifier to the ground before servicing. If you need to raise it for access, support it properly – don’t trust the hydraulic cylinders alone. That’s the kind of real-world safety that usually gets left out of aftermarket reprints.

1-7200 vs 22A07201-Up – Know Your Machine

Before you order a water manifold gasket (70233216), check your serial number. The catalog notes that gasket is for early units only; later machines use a different thermostat housing gasket (70233218). Without the serial range, you’d be guessing. The manual’s two-way split covers all D graders built, and it’s the only way to be sure you’re ordering the late-model parts when needed. Fiatallis HD-9 1989 Parts Catalog – OEM Factory Specs covers a larger crawler, but the same attention to serial number splits applies.

OEM vs Aftermarket: Why the D Parts Catalog is the Standard

I’ve seen aftermarket parts books that combine the D series with the FD series, listing one gasket set for both. That’s wrong. The Fiatallis D uses a gasoline engine; later models went diesel. The factory catalog prints the exact gasket shapes and part numbers that were original equipment. No reprints, no photocopies of worn-out pages. This is a born-digital scan of the official Form 70667884 English manual originally printed in 1989. When you need a rear bearing cap gasket (70229860), you get the factory number, not a cross-reference that may or may not work.

Factory data. No substitute.

For more about the automotive and equipment repair industry, read the Automotive Industry Overview and check Automotive Industry Overview for related standards. If you work on other Fiatallis models, these related manuals will fill your shelf: Fiatallis HD-6A, HD-6AG, HD-6B, HD-6E 1989 Parts Catalog and Fiatallis HD-21 1990 Parts Catalog – Crawler Tractor Parts Manual.

Is this the complete parts list for all D models?

Covers S/N 1 through 7200 and 22A07201-up. Check your serial plate before ordering.

Why should I pay for an OEM parts catalog when I can search online?

Online databases often list superseded numbers or combine different models. This manual is the original factory document scanned from print. It shows exactly which packaging group (e.g., GASKET SET, engine overhaul 70226638) applies to your specific configuration. I’ve had jobs where a generic online lookup sent me the wrong head gasket, lost me a day. This manual gets it right because it’s the same reference the dealership parts counter used when the grader was new. 339 pages of verified part numbers eliminate guesswork.

If you want to stop wasting time on wrong parts and start trusting factory data, Access the Factory Manual now.