Description

Fiatallis 570, 570dt Parts Catalog

I’m Mike Callahan. If you’ve ever spent an afternoon tearing down a Fiatallis 570 transmission only to find the replacement bearing you bought has the wrong inner diameter because the aftermarket catalog grouped three different model years into one listing, you’ll appreciate what this 498-page Parts Catalog delivers. It’s the original factory document from Fiat Trattori – not a reprint, not a scanned copy with missing pages. Every part number, every diagram, every reference in this catalog comes from the Italian engineering office that designed the machine. That means when you look up the part for the 570dt’s final drive, you get the exact number that Fiat assigned, with the correct supersession history and notes about running changes. I’ve been turning wrenches for 28 years, and I’ve seen more damage caused by wrong parts than by bad technique. A parts catalog like this one cuts that risk to zero. The ordering instructions on page 5 and the use-of-catalog guide on page 9 tell you exactly how to navigate the system. Skip that and you’ll be measuring bolt centers with a caliper at the parts counter. Don’t waste your time.

Ordering Norms and Use of the Catalog

Page 5 gives you the Italian instructions for ordering parts correctly. If you skip it, you might order a part that has been superseded or discontinued. The English section starting on page 9 explains how the catalog is organized – model list, variant list, subgroup index, and spare parts index. Follow those rules and you’ll never order a part that doesn’t fit. I’ve seen techs ignore the variant list and end up with a 570 wheel bearing for a 570dt crawler. That’s a wasted afternoon.

Model and Variant Lists – Orange Paper for a Reason

Pages 11 and 13 are printed on orange paper. That’s intentional – they’re the first thing you check. The model list (page 11) confirms which machine you have. The variant list (page 13) tells you about production changes and options. The 570 and 570dt share some parts but not all. The drivetrain, undercarriage, and hydraulic system differ. If you’re ordering a transmission seal, verify that your machine matches the variant. Don’t guess. The orange pages eliminate guesswork.

Subgroup and Spare Parts Indexes – Where the Meat Is

Page 17/1 is the subgroup index. It lists every system on the tractor – engine, clutch, gearbox, rear axle, steering, hydraulics, electrical. Each subgroup has its own section in the plates (starting page 1M). Page 19/1 is the spare parts index, an alphabetical list of every part with its reference number. I always start at the subgroup index. If I need a hydraulic pump seal for the 570dt, I find the hydraulic subgroup, then locate the pump plate, get the reference number, and cross it to the parts list. That’s the correct workflow. Aftermarket catalogs often skip the subgroup index and throw all parts into one alphabetical mess. This manual keeps it organized by machine system.

3 Reasons to Trust OEM Documentation

First, the part numbers are original Fiat. No aftermarket interpretation. Second, the diagrams show the exact assembly as it came from the factory. Third, the miscellaneous section on page 5T and 7T includes bearing specifications and electrical cable data. Page 5T lists bearings with dimensions and part numbers. Page 7T covers electrical cables, terminals, and insulation tubes. If you’re rewiring a 570dt, you need the correct gauge and terminal type. Those pages give you that. I’ve seen aftermarket lists call for a 10-gauge wire when the factory calls for 12-gauge. That overheats. Don’t take that risk.

What Parts Data Is Included?

The catalog covers every nut, bolt, gasket, seal, bearing, hose, and electrical component for the Fiatallis 570 and 570dt. The modifications section (page 3T) lists engineering changes that affect part numbers. If your machine has a serial number after a certain cutoff, you need those tables. The spare parts plates (page 1M) give exploded views with reference numbers. The spare parts list (page 1T) gives the part code, description, and quantity per assembly. This is the same data the dealer uses. It’s complete.

Check the Model List First

Before you look up anything, confirm your machine on page 11. The 570 is a wheeled tractor. The 570dt is the crawler. If you don’t know which you have, check the serial number plate on the frame. The variant list on page 13 will tell you if any running changes affect your machine. I tell every junior tech: start at the orange pages. Always. It saves more time than any shortcut.

Related Manuals

• Fiatallis HD-9 1989 Parts Catalog – OEM Factory Specs
• Fiatallis HD-6A, HD-6AG, HD-6B, HD-6E 1989 Parts Catalog
• Fiatallis HD-21 1990 Parts Catalog – Crawler Tractor Parts Manual

For background on why factory specifications matter, see the Automotive Industry Overview. As noted in that industry context, proper part identification is central to reliability. The same principle applies here. And if you want another perspective, the [LINK_ID_EXT_1: Automotive Industry Overview reinforces the standard.