Description

FIAT Kobelco SK60-3 Parts Catalog – 112 Pages of Factory Specs

You need a replacement FIAT Kobelco SK60-3 Parts Catalog because you already wasted a week waiting for the wrong boom cylinder seal kit. I get it. That’s why this isn’t some aftermarket knockoff – it’s the OEM document used by the factory. 112 pages, original file, no scanned-in-1998 blur. Every exploded view shows exactly which bolt, bushing, and o-ring goes where.

Bucket Cylinder and Boom Components – Why OEM Part Numbers Matter

Look at page 3. You’ll see the bucket assembly, part number 24100N7498F3. That’s a 0.3 m³ bucket. The pins, linkages, dipper stick – all broken down with individual part numbers. The SK60-3 uses a specific bucket cylinder that doesn’t cross to a generic seal kit. Page 5 shows the bucket pins with shims and locking pins. I’ve seen guys order a dipper stick cylinder for a Deere because the length looked close. Don’t. Use this catalog to match the FIAT Kobelco part number. The rebuild will take one day, not three.

Does This Parts Catalog Cover the Undercarriage?

Yes. Track chains, grousers, top rollers, front idler, recoil spring, track adjusters, bottom rollers, track motors, final drives, drive sprockets – it’s all in here. The hydraulic tank, fuel tank, belly plate, cooling group. Every section lists the factory part code. If you’re replacing a slew motor gearbox, the catalog shows the gearbox assembly and the individual gears and bearings. No guessing which bearing fits.

112 Pages of Factory-Coded Exploded Views

This manual packs 112 pages of drawings. The table of contents alone lists over sixty assemblies: cab, seat, instrument panel, relays, computer, hand servo controls, heater A/C, bonnet, doors, diesel engine, radiator, hydraulic oil cooler, hydraulic pumps, control valve, center joint, slew bearing, batteries. Each one is an exploded view with a parts list. You get the FIAT Kobelco part number, the quantity, and the item number. That’s it. No fluff, no generic cross-references.

Get the Right Part the First Time – No Guessing

When you order a boom lift cylinder seal kit, you order by the exact part number from this catalog. The bucket cylinder, dipper stick cylinder, boom cylinder – all three are illustrated with their seals, bushings, and o-rings. The cap screw torque? That’s in the service manual, not here. But the part number for that cap screw? It’s on page 3: ZS23C10030. You need that to order from your dealer. This catalog saves you the 45-minute call where the parts guy says “Is it the long one or the short one?”

Fuel System and Hydraulic Tank: Avoiding Cross-Threaded Fittings

Hydraulic hose assemblies are drawn with specific fittings. The fuel tank assembly shows the pickup tube, sender, and gasket. If you replace a hydraulic hose without checking the catalog, you might get the wrong end fitting. Then you’re stuck cross-threading a JIC into an ORFS port. Use the catalog, get the correct OEM hose assembly part number. It’s that straightforward.

I’ve torqued head bolts on dozens of these machines. The aftermarket parts catalogs on eBay are garbage – wrong illustrations, missing revisions. This one is the real deal. You’ll see Automotive Industry Overview Automotive Industry Overview as a reference for industry standards. And Automotive Industry Overview if you need broader context, but honestly the manual covers everything.

FAQ

Can I use this parts catalog to identify seals for the bucket cylinder?

Yes. The exploded views show part numbers for every seal and o-ring.

How do I ensure I order the correct hydraulic pump for my SK60-3?

Cross-reference your machine serial number with the hydraulic pump section in this catalog. The exploded drawing lists the pump assembly part number and the individual gear set, shaft seal, and mounting flange. If your pump has a different prefix, check the supplement pages – the catalog notes model-year breaks. I’ve watched guys order the wrong pump because they eyeballed the housing instead of checking the part tag. Use the catalog, read the part number off your old pump, and match it to the illustration. That fifty-dollar mistake goes away.

Related manuals to consider: FIAT Kobelco ED150, ED150-IE 2013 Parts Catalog OEM if you run a larger excavator, or FIAT Kobelco ED150, ED150-2 2009 Parts Catalog OEM Manual for the earlier series. Also FIAT Kobelco LK650-II 1992 Parts Catalog – OEM Factory Specs for the loader line.

You’ve got the machine on blocks waiting for parts. Stop flipping through blurry photos on forums. Access the Factory Manual now and get the right part number before the parts house closes.