Description

FIAT Kobelco 50SR-5 2010 Parts Catalog – OEM Part Numbers for Your Backhoe Loader

Ordering the wrong part for a 50SR-5 costs time and money. I’ve seen guys bolt on a cylinder from a different model because the aftermarket catalog said “fits.” That cylinder didn’t line up. They lost half a day. Get the factory part number from a real OEM parts catalog—the one you’re looking at now—and you skip that headache. This is the FIAT Kobelco 50SR-5 2010 Parts Catalog, 688 pages of part numbers, illustrations, and exploded views that match the machine’s build.

Inside you get the exact same documentation that CNH America LLC shipped to dealers. The binder measures 2.85 inches thick for the large binder, 4.75 inches for all binders—that’s a stack of paper you can trust. Every part is keyed to a reference number, a factory part number, a year/serial range, and a quantity. No cross-reference guesswork.

688 Pages of Factory Part Numbers

Page count alone doesn’t tell you much, but these 688 pages are dense. The catalog breaks down the 50SR-5 into sections: engine, hydraulics, undercarriage, cab, electrical, and more. Each section starts with a group illustration, then lists every nut, bolt, seal, and assembly you could need. The hydraulic cylinder example on page 5 shows the format: 17 columns including REF, FN, PART NUMBER, YR/SN, QTY, and DESCRIPTION. That’s the level of detail you need when your machine is down.

General Information: Orientation and Hardware Rules

Read page 4 before you start ordering. It states: “Whenever the terms left and right are used, it should be understood to mean from a position facing in direction of travel.” That matters when you’re ordering a track frame or boom assembly—order the wrong side because you flipped your orientation, and you’ll wait another week. The manual also warns that common hardware may not be illustrated; the service part immediately preceding a hardware listing uses those fasteners. The hardware is not included with the service part. Ignore that and you’ll find yourself short a bolt.

How to Use Your Parts Catalog

Page 5 shows a cylinder assembly with reference callouts and a parts list. You match the circled number in the illustration to the REF column. Then you check the part number, confirm your serial number falls within the YR/SN range, order the quantity listed. That’s it. No aftermarket catalog does it this cleanly because they don’t have the original artwork. This catalog uses the exact assembly drawing from Kobelco’s engineering department. The illustrations show typical assemblies plus individual parts—if the shape looks slightly different but the function matches, you’ve got the right part.

Why OEM Part Numbers Matter for the 50SR-5

Aftermarket parts books combine numbers from multiple brands. One catalog says a final drive seal fits a 50SR-5 and a 50SR-3. Maybe it does, maybe it doesn’t. The seal diameter could be 0.010 inch off and you’ll never know until it leaks. This catalog only lists the exact part for your exact machine with applicable ASN PJ06-09807. You get supersessions documented. You get factory changes. You don’t get generic listings that waste your time. If you’re serious about keeping that compact crawler excavator running, you use the source.

Example: Hydraulic Cylinder Assembly

Look at page 5 again: cylinder assembly part number 396137A2. The listing includes a breather (402475A2), a cap (402474A), a piston rod/gland with a serial number split, a spacer, a piston rod, and a seal package (402476A1). Each sub-part has its own number. If you only need the seal kit, you don’t buy the whole cylinder. The aftermarket cross-reference might give you a “seal kit” that fits five machines—good luck matching it to your stroke length. This catalog gives you the right kit, right part number, right quantity.

Stop guessing on part numbers. Get the official FIAT Kobelco 50SR-5 Parts Catalog from AutoRepairManuals and Access the Factory Manual today.

For other FIAT Kobelco models, check the FIAT Kobelco ED150, ED150-IE 2013 Parts Catalog OEM or the FIAT Kobelco ED150, ED150-2 2009 Parts Catalog OEM Manual. Need specs for an older LK650? See the FIAT Kobelco LK650-II 1992 Parts Catalog – OEM Factory Specs. To understand the broader context of heavy equipment manufacturing, read the Automotive Industry Overview and our Automotive Industry Overview page.

Frequently Asked Questions

Does this catalog cover all years of the 50SR-5?

It covers machines with serial number ASN PJ06-09807, issued 9/2010.

Can I use this catalog to perform repairs like torque specs or adjustments?

This is a parts catalog, not a service manual. It does not contain torque values, assembly procedures, or diagnostic steps. You need the factory service manual for that. However, when you order a replacement part, the catalog ensures you get the correct component. If you order a cylinder assembly and install it without the right seals because you guessed the part number, you’re wasting money. The catalog eliminates that risk. Pair it with the service manual for a complete shop reference.

Are wiring diagrams included?

No. The catalog focuses on mechanical and hydraulic parts lists. Electrical components like solenoids and switches are listed by part number, but harness routing and pinouts are not present.

Is this a genuine OEM manual or a reprint?

It is a direct scan of the original CNH America LLC publication. No third-party editing, no reprints. The PDF retains the exact layout, artwork, and part numbers from the 2010 print.