Description

FIAT Kobelco 180-55 1986 Parts Catalog

I’ve seen too many backyard mechanics order a water pump for a 180-55 only to get a box of wrong parts because they pulled a number off a forum. That’s a Friday wasted. If you’re working on a FIAT Kobelco 180-55 from 1986, you need the FIAT Kobelco 180-55 1986 Parts Catalog — the actual factory book, not a third-party reprint cut from a photocopier. This thing runs 347 pages of factory part numbers, exploded diagrams, and ordering codes that match what the dealer still uses. It covers every variant listed in the “Elenco delle varianti” section, so you don’t end up chasing the wrong bearing.

I’ve rebuilt a lot of backhoe hydraulics, and the difference between a genuine part number and a “cross‑reference” can mean an afternoon of shimming misaligned splines. This catalog saves that hassle. It’s the same book the dealer would flip open when you call them, and it’s in multiple languages — Italian, French, German, English, Spanish. You get page 6 for the consultation rules, page 11 for model breakdowns, and the whole 800‑plus numbered illustrations in the “Parti di Ricambio” section. No translation apps needed if you stick to the English column.

Part Numbers That Actually Fit

The “Indice dei sottogruppi” (subgroup index) starts on page 17/1. That’s where you’ll find every group: engine, transmission, hydraulics, undercarriage. Each subgroup leads to a table of parts with factory codes. I don’t care if your neighbor says a $3 o-ring from the hardware store works — when you want the correct seal for a 1986 backhoe loader, you look up the exact code from this catalog. The “Elenco delle parti di ricambio” (list of spare parts) gives you the reference number that matches the FIAT Kobelco inventory system. It’s the same system used for later models like the FIAT Kobelco ED150, ED150-IE 2013 Parts Catalog OEM.

Ordering Parts Properly: What Page 4 Says

Page 4 of this catalog lays out the “Norme per le ordinazioni” — ordering instructions. You need to know how to read the part number structure and how to order superseded items. Overlook this page and you might request a part that’s been updated twice. The manual tells you which numbers are interchangeable and which are strictly serial‑number locked. That matters when you’re sourcing a hydraulic pump for a machine that could have a dozen different variants. Check page 4 before you fill out any order form.

Consulting the Catalog: Page 6 Rules

The “Avvertenze per la consultazione del catalogo” (page 6) is your roadmap. It explains how the illustration numbers tie to the part lists. I read this page first on any new catalog, because every OEM formats things slightly different. FIAT Kobelco uses a two‑column layout: left side has the exploded view with callouts, right side lists the codes, descriptions, and quantities. Skip this and you’ll be flipping back and forth guessing which fastener is #47. The same logic applies to the FIAT Kobelco ED150, ED150-2 2009 Parts Catalog OEM Manual — but that’s a newer manual; this 1986 book has its own quirks.

Model List and Variants (Pages 11–13)

Pages 11 and 13 cover the “Elenco dei modelli” and “Elenco delle varianti”. The 180-55 came with different engine options, transmission types, and bucket configurations. If yours has a roll bar or a canopy, the variant code changes the parts you need. The catalog gives you the serial number ranges for each variant. I’ve seen guys order a clutch plate that fits a standard machine only to find the frame is different on a high‑boom version. This section stops that. It also cross‑references to the FIAT Kobelco LK650-II 1992 Parts Catalog – OEM Factory Specs if you’re managing a fleet.

352? No, 347 Pages of Factory Data

This is the 1986 edition, printed February ’86, stamp number 603.14.320.00. It’s 347 pages — not a reprint that cuts off at page 300. The page count includes every illustration and list. That matters when you need to verify a part like a seal that only appears on page 286 of the original. The Automotive Industry Overview may talk about standardization, but this catalog is the exact opposite of generic. It’s purpose‑built for one machine: the 180-55. Once you hold it, you’ll see the difference between a real factory scan and a slapped‑together PDF. Automotive Industry Overview might tell you how engines work; this catalog tells you exactly which bolt to turn.

FAQ

Does this catalog cover the fuel injection pump?

Yes. The subgroup index includes the fuel system group. You’ll find the injection pump listed with its part number. However, this is a parts catalog, not a service manual — it won’t give you pump calibration specs.

Can I use this to order parts for a 1987 model?

This catalog is specific to the 1986 180-55. Later years may have different serial number ranges. Check your machine’s serial against the “Elenco dei modelli” before ordering.

What languages are included?

Italian, French, German, English, and Spanish. The part numbers are standardized across all languages.

Will the part numbers still be valid with FIAT Kobelco dealers today?

Many are still active, but some parts have been superseded. The catalog’s ordering instructions explain how to handle superseded numbers. Always confirm availability with your dealer.

Look, I’ve been doing this since torque wrenches still used beam gauges. When you need a part for a 1986 FIAT Kobelco 180-55, you want the factory number, not a guess. This 347-page catalog puts every code at your fingertips. Don’t waste another afternoon reaming out misdrilled holes because you grabbed the wrong bracket. Access the Factory Manual and keep it on your tablet or print the pages you need. You’ll thank yourself the next time a hydraulic line blows on a Friday.