Description

Fiat-hitachi ZAXIS 200-3, ZAXIS 210H-3, ZAXIS 210K-3, ZAXIS 200LC-3, ZAXIS 210LCH-3 Parts Catalog

If you’re ordering parts for a Fiat-hitachi ZAXIS 200-3 or any of the other variants listed here and you’re guessing part numbers based on aftermarket websites, stop. You’re burning billable hours and betting the shop’s money on unreliable references. I’ve had techs come to me with the wrong seal kit because some third-party list had a transposed digit. This isn’t that. This is the factory Parts Catalog – directly from Hitachi’s engineering documentation. 739 pages of exploded views, OEM part numbers, compatibility codes, and application matrices. You open this PDF, find your model, cross-check the serial number range, and order the exact part the machine was built with. That’s the difference between a job that fits the first time and a parts run that eats your lunch.

Engine Section – What You’ll Find in the Factory Breakdown

Under the UPPERSTRUCTURE chapter heading you’ll find the Engine and Engine Support sections. These aren’t generic diagrams – they show the Isuzu AI-4HK1XYSA-02 engine mounting hardware, brackets, and accessory drives exactly as they left the factory. Each component has a part number, quantity per machine, and compatibility marks like Y (unconditional interchangeability) or T (combination interchange). If you’re doing an inframe or swapping a oil cooler line, you pull up the Engine section, find the part number on the exploded view, and order it. No guesswork. No cross-referencing aftermarket catalogs that may have updated the design without telling you.

Upperstructure Breakdown: Frame, Counterweight, and Center Joint

The catalog breaks the upperstructure into logical groups. FRAME, COUNTERWEIGHT, CENTER JOINT PARTS (UPPERSTRUCTURE) – each with its own page set. Need the center joint seal kit for a ZAXIS 210LCH-3? You’ll find it under that heading, with a note if the part applies to <210LCN,240N> variants. The catalog uses indicator tags at the top of each page: <200>, , , <210LCN>, <240N> so you know exactly which model the parts fit. This is factory logic, not aftermarket guessing. Every time I’ve used this level of detail, the parts showed up right.

739 Pages – Finding the Exact Part Number You Need

Don’t let the page count intimidate. The PDF is bookmarked with the full table of contents – you click UPPERSTRUCTURE, then FUEL TANK, PUMP DEVICE, SWING DEVICE, CONTROL LEVER (FRONT,SWING) – every subassembly is a click away. For instance, the ELECTRIC PARTS (A) section covers batteries, alternator harnesses, and fuse blocks with part numbers. The PILOT PIPING (A through J) sections show every hose and fitting route. I’ve used this catalog on a ZAXIS 210K-3 to identify a pilot hose that had worn against the frame – the exploded view showed the exact bend and clamp location. That’s the kind of detail you only get from a factory document. Related manuals include the Hitachi ZAXIS Troubleshooting Technical Manual 2006 if you need diagnostic procedures, and the Fiat-hitachi 850-3, 850LC-3, 870H-3, 870LCH-3 Parts Catalog for larger machines. For compact excavators, check the Fiat-hitachi ZX50U-2 Parts Catalog – 120 Pages of OEM Specs.

Does This Catalog Cover the ZAXIS 210K-3 and 210LCH-3 Variants?

Yes. The front matter lists applicability for ZAXIS 210K-3, ZAXIS 210LCH-3, and the long-track ZAXIS 200LC-3. Each page has model indicators at the top – you’ll see for the 210K-3 and for the 210H-3/210LCH-3. The catalog also covers the <210LCN> and <240N> variants sold in specific regions. If your machine serial number starts after 200001, this catalog applies. Don’t order parts for a 210K-3 using a 200-3 page without checking the indicator – that’s how you get the wrong bracket. Use the compatibility columns (Y, I, T, P) to verify interchangeability across serial number breaks. This document tells you exactly when a part changed and what supersedes it.

Use the Compatibility Marks to Avoid Wrong Orders

Hitachi put a symbol system in place for a reason. $? No – those are actual letters. Y means the part is fully interchangeable with the previous design. I means you can substitute the listed part number for the old one, but not the reverse. T means groups of parts must be replaced as a set. P means the old part is prohibited – use the listed alternative. I’ve seen shops ignore these marks and end up with a pump that didn’t fit because they swapped only half a matched set. This catalog prints those marks right in the parts list column. Read them. If you’re working on a ZAXIS 200LC-3 with a late serial number, check whether the OIL TANK section has a Y on the suction line assembly – saves you a core return. For broader context on machine documentation standards, see the Automotive Industry Overview and understand why OEM data beats aftermarket every time. Another perspective is the Automotive Industry Overview – not manual-specific, but reinforces the value of factory specs.

Who Needs This Catalog?

If you’re a shop foreman, parts manager, or independent mechanic who maintains a fleet of Fiat-hitachi excavators, this PDF belongs on your workbench. Home garage guys rebuilding a ZAXIS 210H-3 undercarriage – same. The exploded views are clear enough to identify wear items like bushings, seals, and bearings without having to disassemble everything first. Beginners? This isn’t a repair manual – it’s a parts identification tool. You’ll need a service manual for torque specs and procedures. But if you want to order the correct replacement part without taking the old one to the dealer for matching, this catalog is your single source of truth.

FAQ

Is this the same as a service/repair manual?

No. This Parts Catalog shows exploded views and part numbers only. You need a separate technical manual (like the troubleshooting manual) for repair procedures and torque values.

How do I find a part for my specific ZAXIS 210K-3 serial number?

Look at the model indicators at the top of each page – identifies parts for the 210K-3. Then check the compatibility column for Y or I marks. The catalog includes serial number breaks in the application notes. If your machine is within the range listed, the part number is correct. If you see a P mark, do not use that part – the alternative column lists the updated number. This system prevents ordering a discontinued component that may have a different mounting pattern or material grade. I’ve used it on a 200-3 that had a mid-life frame update; the catalog flagged the change with a D03/09 date code. Without that, I’d have ordered the old bracket.

You’ve got the part number. You’ve got the exploded view. You’ve got 739 pages of factory data that’s been cross-checked by Hitachi’s engineering staff. The only missing piece is you accessing it. Access the Factory Manual now and keep this catalog on your tablet or printed binder. Every time you order parts for a Fiat-hitachi ZAXIS 200-3, 210H-3, 210K-3, 200LC-3, or 210LCH-3, you’ll have the exact OEM reference at your fingertips. No more returns. No more wrong seals. Just the right part, the first time.