Description

Fassi Crane F 190.24 User Manual

If you’re running a Fassi Crane F 190.24 User Manual and you don’t have the factory user manual in your glovebox, you’re gambling with equipment you probably paid a lot for. I’ve seen too many guys twist a crane because they guessed the load chart or skipped the outrigger procedure. This manual is 55 pages of OEM data – not a reprint, not a summary. It’s the same binder the factory ships with the crane. The OCR excerpt on page 2 says: “THANK YOU FOR SELECTING ONE OF OUR CRANES.” That’s the kind of document you’re getting – original, factory-sourced, with the serial number range printed on page 1.

Safety Norms on Page 3: Read Before You Touch the Crane

Page 3 carries the warning symbol and the words: “READ THIS MANUAL CAREFULLY prior to use of the crane or any maintenance.” That is not optional. The manual specifies maximum lateral extension of outriggers, prohibits operating outriggers under load, and demands the vehicle be stabilized on a horizontal plane with a maximum tolerance of 1.5 degrees. You skip that and you’re asking for a tip-over. Every safety device, warning plate, and instruction label is listed in chapters A and B. Verify they are in place before you start.

Technical Data on Page 8: Lifting Capacities and Dimensions

This chapter gives you the crane’s dimensions, weight, and most importantly the load capacity charts. You need to know the exact working radius and the corresponding load limit. The manual uses Imperial units (lb, ft) and includes the “EXTRA CE version” note for serial numbers starting *0914*. Do not mix up versions – using the wrong capacity plate will kill someone. The capacity plates themselves are reproduced in Appendix B on page 48.

Fassi Crane F 190.24 User Manual: The Only Spec Source You Need

Third-party sites might offer a PDF, but they often miss the OEM torque values for the slewing ring bolts and the outrigger cylinder retainers. This user manual gives you the exact tightening sequence and torque specs buried in the maintenance chapter (XII). The 55 pages cover everything from “IDENTIFICATION OF THE CRANE MODEL” (chapter IV) to “OIL AND LUBRICANT CHARACTERISTICS” (chapter XV). If you want to keep the crane under warranty and avoid costly hydraulic leaks, stick with the factory file.

What Does the Load Limiting Device Cover?

Chapter VIII – “LOAD LIMITING DEVICE – LIFTING MOMENT LIMITING DEVICE (A RICHIESTA)” – explains optional electronic overload protection. The manual shows how the system interrupts crane functions if the load moment exceeds safe limits. It also covers the override procedure if the device malfunctions. Do not operate with a known fault. The manual lists possible faults in chapter XIII (page 38) and the corrective actions. That section alone can save you a week of diagnostic time.

Outrigger Stabilization (Chapter IX): Why Leveling to 1.5 Degrees Matters

Page 16 through page 24 detail every control for stabilizers: manual levers, hydraulic check valve operation, and the sequence for deploying outriggers on uneven ground. The manual explicitly warns that “the stability of the unit (crane-vehicle) is only guaranteed by the maximum lateral extension of the outriggers.” If you have to work on a slope, you must use the optional larger base plates mentioned in the text. For a primer on crawler crane types, see Crawler Crane on Wikipedia. Also, understanding Manual Transmission basics can help when troubleshooting driveline-related stability issues.

Inspect the Warning Plates Before Every Shift

Appendix A (page 45) reproduces every instruction and warning plate that must be affixed to the crane. The manual says: “Warning plates, as well as instruction and operation plates must be replaced when no longer readable or missing.” Use the images in the manual to verify placement. Missing plates can lead to an operator using the wrong control lever. That’s a mechanical injury waiting to happen.

If you work on multiple types of heavy equipment, check out these OEM factory manuals: Hitachi ZAXIS225US-3 2007 Operators Manual | OEM Factory Specs, Schneider Electric Masterpact NW08-63 User Manual – Factory Specs, and Astra Veicoli Industriali HD8 2005 User Manual – OEM Factory Specs. Each one follows the same no-compromise OEM documentation standard.

Frequently Asked Questions

Does this manual include the load limiting device section?

Yes, chapter VIII covers it.

What torque values are specified in the manual?

The maintenance instructions (chapter XII) list tightening torques for critical bolts on the slewing ring and outrigger cylinders.

Can I use this manual for other Fassi crane models?

This manual is specific to the F 190.24. The serial number range on page 1 shows validity from *0914*. Load charts, hydraulic schematics, and component layouts are unique to this model. Using it on a different model risks using incorrect capacity data and safety device configurations. Always match the model and serial number before applying any procedure.

Does the manual include electrical diagrams?

Hydraulic schematics are on pages 39-43. Electrical diagrams are not included in this user manual; that would be in the service manual.

Stop trusting photocopies and third-party summaries. The real data is in the OEM binder – 55 pages of factory specs, safety checks, and hydraulic schematics from Fassi Crane. Access the Factory Manual and put it on your tablet or print it for the tool box. Your crane will last longer, and your liability will shrink.