Description

Dynapac PL2000LS Parts Catalog (258 Pages)

If you’re turning wrenches on a Dynapac PL2000LS cold planer and you don’t have the factory parts catalog in your hand, you’re working blind. I’ve seen guys waste an afternoon trying to match a worn bearing by eye, then order the wrong one and sit idle another week. That’s time you don’t get back. This is a factory spec parts catalog from Dynapac, not some third-party compilation. It’s 258 pages of exploded diagrams and part numbers. You get the exact OEM reference for every nut, bolt, seal, and hydraulic line. No shortcuts. Use this if you want to order the right part the first time. The PL2000LS is a heavy machine – if you bolt the wrong component in, you risk downtime or safety issues. With this catalog, you eliminate the guesswork.

Main Frame and Fuel Tank Assembly

Each major assembly on the PL2000LS is broken out into its own section. The first group covers the main frame, engine hood, tank covering, and foot room. Fuel tank and seats are listed under part group 504-01135. You’ll find the belt covering, accessories box, operator stand, and the ascent assembly. Every piece has a clear illustration with part numbers. The lift and tip up mechanism is also there. That fuel tank part number is critical – ordering the wrong tank can cost you a week in delivery delays. This catalog gives you the right reference the first time.

Planer Unit: Cutting Drum and Milling Section Details

Section PL2000LS02_01_C covers the planer unit: milling section, milling housing, back flap, cutting drum, belt tensioner, cutting drum bearing, and round shank bits. If you’re replacing a cutting drum bearing, you need the exact part number for the bearing and the drum itself. The belt tensioner assembly is also listed separately. Aftermarket catalogs often skip the bearing part number or list it wrong. Not here. This is Dynapac’s own documentation – every sub-component has its own line item.

Drive Unit: Engine QSX15-C600 and Split Gear Box

Under PL2000LS06_01_B you’ll find the drive unit with the engine QSX15-C600 Tier 3 (part number 966390005) and the Stiebel split gear box (part number 951058552). Also listed: exhaust system, air filter unit, cooling system, filling and ventilate components, and water extruder. If you need a water extruder or a cooling system part, it’s in there. The engine is a high-dollar component – ordering the wrong long block will set you back thousands. This catalog gives you the exact OEM part number for the engine and every bolt on it.

7 Systems Covered in This Catalog

Look at the table of contents. You get eleven major groups: Main frame, Planer unit, Material feeder, Steering, Track group, Drive, Hydraulic equipment, Electronic unit, Water system, Accessories, and Options. The hydraulic equipment section alone has nine sub-sections: oil tank, drives, belt drives, three steering circuits, suction/return lines, engine hood, convertible roof, and foldable conveyor options. If you’re rebuilding a hydraulic circuit, you need these part numbers. The electronic unit section includes the control unit, operator desk, lighting, camera system, and all cable plans. No guessing which relay fits where – the part number is on the diagram.

Water System and Accessories – Prevent Leaks Before They Happen

The water system section (PL2000LS09_01) covers the water tank, water spray equipment, water level option, and cleaning lance. Part numbers for spray nozzles and the water tank are listed. Accessories include high pressure cleaner, compressed-air plant, shank bit extensioner, pneumatic screw driver, blow pistol, grease pistol, and pressure air hose. If you’re setting up a service cart for these machines, the tool list is worth its weight. The options section even lists the remote control for rear steering and the sonic leveling sensors.

Each diagram is keyed to a part number.

Related Manuals

• Dynapac PL2000LS Parts Catalog
• DYNAPAC PL2000LS Spare Parts Catalogue 504.145
• DYNAPAC PL2000LS Spare Parts Catalogue 504.136 – Section: Accessories

For industry background on construction equipment manufacturing standards, see Automotive Industry Overview and Automotive Industry Overview for context on the quality expectations behind factory documentation.

FAQ

Is this catalog the same as a service manual?

No. This is a parts catalog only. It shows parts and part numbers, not repair procedures.

What year models does it cover?

The catalog covers the PL2000LS cold planer model. Since there’s no publication year on the cover, but the engine listed is the QSX15-C600 Tier 3, it likely covers machines from the mid-2000s onward. However, Dynapac updated parts over time. The catalog includes many options and variations, so you’ll find newer part numbers alongside older ones. If you have a specific serial number, cross-reference with the latest factory update. This is still the best starting point for ordering parts, but verify against the machine’s build date for absolute accuracy.

Does it include the engine part numbers?

Yes, the drive unit section lists the engine QSX15-C600 Tier 3 with part number 966390005, plus all engine-related components like air filter, cooling system, and exhaust.

Can I use this to rebuild the hydraulic system?

You can use it to order all hydraulic parts. The hydraulic equipment section has nine sub-sections covering the oil tank, drives, belt drives, steering circuits, and lines. Every hose, fitting, and pump is listed with a part number. But remember, this is a parts catalog, not a rebuild manual. You still need the service manual for assembly procedures and torque specs.

Stop ordering wrong parts for your Dynapac PL2000LS. Get the factory manual and fix it right. Access the Factory Manual today.