Description

Dynapac CC522C Parts Catalog – Factory Spare Parts Documentation

I’ve seen more parts orders go sideways than I care to count. A guy slaps an aftermarket part number on a Cummins 4BTA 3.9 fuel line, swears it’s the same, and two days later the roller is puking diesel on the job site. That hits your wallet and your timeline. The Dynapac CC522C Parts Catalog stops that nonsense cold. This is the original OEM Spare Parts Catalogue – 409 pages – and it gives you the exact part number, diagram, and reference for every piece on that vibratory combination roller. No guesses, no cross-references from a third-party site.

Ordering Spare Parts: The 6 Required Details

Page 4 of the manual lays out exactly how Dynapac wants you to order. Type of machine, roller serial number, quantity, part number, part name, and dimensions if ordering by length. Miss one of those and you’re waiting for a callback from the dealer. I’ve had guys skip the serial number and end up with the wrong brake assembly. This catalog makes it hard to screw up because every illustration ties back to a specific serial range. Use it.

Cummins 4BTA 3.9 Elite Engine – Parts Breakdown

The CC522C runs a Cummins 4BTA 3.9 Elite diesel. That engine has its own section inside this parts catalog with gaskets, injectors, filters, and everything else. Need a part number for the injection pump seal? It’s in here. No need to call the dealer and hope the guy on the phone is having a good day. The exploded views show you exactly how the parts go together, so you can spot when a previous owner has jammed something in backward.

Serial Number Verification – Why It Matters

Look at the front matter. The catalog covers rollers with serial numbers from 63010522 and up – and lists which edition replaced which. SCC522C-1EN3 is the current release from December 2004. If you’re working on an older unit, you need the correct edition. This catalog includes the production change notes so you don’t order a part that was superseded three years ago. I’ve seen a guy order a vibration motor for a pre-2000 roller using an old book and it didn’t fit. Save yourself that headache.

How This 409-Page Catalog Prevents Parts Errors

Every page is a high-resolution illustration with callouts. You see the part, you read the number, you order it. No interpretation. No “I think this is the right bearing.” The catalog groups parts by system – engine, drive train, vibration system, hydraulic, electrical, frame, and more. That’s how you spend 20 minutes finding a part instead of two hours digging through bins. You want to work faster? Stop guessing. Use the OEM drawings.

If you need the companion service manual for torque specs and repair procedures, check the Dynapac CC522C Parts Catalog”>Dynapac CC522C Parts Catalog or the DYNAPAC CC522C Spare Parts Catalogue SCC522C-2EN2″>DYNAPAC CC522C Spare Parts Catalogue SCC522C-2EN2 for a later revision. For other models, the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec”>Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec follows the same format.

Audience – Who Needs This Catalog?

If you’re a mechanic turning wrenches on heavy compaction equipment, you need this. If you’re a shop owner buying parts for a fleet of rollers, you need this. Even a home garage guy who bought a used CC522C from an auction can use this to track down parts without getting fleeced by the dealer. The catalog assumes you know how to read a drawing and use a wrench – it doesn’t hold your hand. That’s fine. You’re here to get the right part the first time.

Why OEM Parts Documentation Matters

Aftermarket parts catalogs copy the pictures but often change the part numbers. I’ve seen a hydraulic filter cross-referenced to something that was ¼-inch shorter. That leaks. Dynapac prints their own books – same as what comes with the roller from the factory. The Automotive Industry Overview”>Automotive Industry Overview explains why OEM documentation reduces liability. This catalog is your insurance against ordering garbage.

Speaking of industry standards, the Automotive Industry Overview”>Automotive Industry Overview covers similar traceability requirements for heavy equipment. But for the CC522C, you only need this one book.

What engine does the Dynapac CC522C use?

Cummins 4BTA 3.9 Elite diesel. The parts catalog has a full section for it.

How do I know if this catalog matches my roller’s serial number?

Check the serial number range on page 3. The catalog covers serial numbers from 63010522 and up. If your roller is older, you may need the earlier edition (SCC522C-1EN1 or EN2). The manual lists the exact production dates and which edition replaces which. Dynapac updates the catalog when parts change – always verify the serial number before ordering. Ordering without it is a crap shoot.

Don’t waste another day waiting for the wrong part. Access the Factory Manual now and start ordering with the numbers that match your machine.

• Dynapac CC522C Parts Catalog”>Dynapac CC522C Parts Catalog
• DYNAPAC CC522C Spare Parts Catalogue SCC522C-2EN2″>DYNAPAC CC522C Spare Parts Catalogue SCC522C-2EN2
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec”>Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec