Description

Dynapac CC234CHF 2010 Parts Catalog

If you’re ordering parts for a Dynapac CC234CHF vibratory roller and you don’t have the factory parts catalog, you’re burning hours. I’ve seen guys order a steering cylinder three times because they guessed the wrong part number from a third-party diagram. This Dynapac CC234CHF 2010 Parts Catalog is 483 pages of OEM exploded views and exact part numbers. No aftermarket ‘also fits’ garbage. You get the right number for the right serial number. That’s it.

Service Kits and Repair Kits – What’s Inside

The catalog starts with service kits for the Cummins QSB 3.3 engine: 50h, 250/750h, 500h, 1000h – all with their own part numbers. Repair kits includes the eccentric shaft kit (4700945722), scraper kit, shock absorber kit for the drum, and steering hitch kits. If you need to rebuild the drum, you’ll find the exact kit. Page 2 of the catalog (the ordering page) shows exactly what info to provide: machine type, serial number, quantity, part number, denomination, and dimensions if ordering by length. Follow that and you won’t get the wrong box. That’s the difference between a job done and a job waiting for a backorder.

Get the Right Part Number – Every Time

I’ve seen guys try to order a ‘cover’ and end up with a hose support because they didn’t check the module breakdown. This catalog organizes parts by module – front frame, rear frame, sprinkler system, end frames, drums, engine room, hydraulic system, electrical. Each module is broken down into subassemblies. For example, the scraper module comes in two variants: with or without nozzles. The part numbers are listed right there. No guesswork. Use the mirror number from the diagram and cross-check with the parts list. That’s how you keep a roller running.

6 Major Systems Covered in the CC234CHF Parts Catalog

You’ll find six main sections in the table of contents: Service/Repair Kits, Frame, Drum, Engine, Hydraulic System, Electrical Equipment. Frame alone has front and rear frame, sprinkler system, end frames, and all the brackets and scrapers. Drum section covers split drum, propulsion motor, vibration motor. Engine section has the Cummins QSB 3.3 with air cleaner, muffler, charge air cooler, coolant hoses. Hydraulic system has hoses, valves, pumps, flow divider, steering. Electrical covers sensors, switches, lights, and the control box. This catalog doesn’t tell you how to repair – it tells you what parts you need to buy. That’s its job.

Frame section is massive – front frame, rear frame, sprinkler system, end frames. Each has multiple modules. For the front end frame, there are grab handles, scrapers (with and without nozzles), cocoa mats, brackets, and step assemblies. If you need a scraper bracket, you look under ‘Scraper module, without nozzles’ and find part number 4700394340. That’s the kind of detail the factory catalog gives you. Not just a vague ‘bracket’ but the exact assembly. The same precision applies to the Hydraulic system: every hose from the front drum, frame, engine room, flow divider, and steering is listed with its own part number. You cannot get that level of accuracy from an aftermarket compilation.

Ordering Spare Parts: Follow This Procedure

Dynapac actually printed the ordering procedure on page 2 in six languages.

You need to give: machine type (CC234CHF), roller serial number (valid from 10000314x0A000001), quantity, part number, denomination, and if it’s a length item, the dimensions. If you skip the serial number, you might get a part that doesn’t fit because the design changed. This catalog is valid from 0A004001 onward. If your serial is older, you need a different issue. The catalog issue number is SCC234CHF-2EN2, dated 2010-10.

Source Authenticity: Factory OEM vs Aftermarket Catalogs

Aftermarket parts catalogs are compiled from whatever they can scrape. They often merge part numbers from different models and years. Then you order a ‘hydraulic valve’ and it doesn’t have the right porting. This Dynapac factory catalog is printed in Sweden, part of Atlas Copco Group. It’s the same book the dealer uses. Automotive Industry Overview might give you background on how OEM documentation ensures consistency. Automotive Industry Overview applies to construction equipment too – the principle is the same: OEM data is traceable. When you order with part number 4700391017 from this catalog, you get the exact hydraulic valve. Not a substitute.

If you need additional documentation for other Dynapac models, check out the Dynapac CC234CHF 2010 Parts Catalog for the full version. For a different year, the Dynapac CC234CHF Parts Catalog might be available. Also see the DYNAPAC CC234CHF Spare Parts Catalogue for the complete spare parts listing.

What serial numbers does this catalog cover?

Valid from roller serial number 10000314x0A000001 onward, specifically from 0A004001. Check your machine’s plate.

Does this catalog include wiring diagrams or repair procedures?

No. This is a Parts Catalog – it only lists spare parts with exploded diagrams and part numbers. That’s a separate document.

Can I order parts directly from this manual?

You can, but you must provide the correct part number and your dealer’s ordering system. The catalog includes ordering instructions on page 2. Use that info when calling your Dynapac dealer.

Are there different versions for different markets?

This catalog is multilingual (English, Swedish, German, Italian, Spanish, French) and covers the same machine worldwide. Only the serial number range matters – the manual is valid from 10000314x0A000001 onward, specifically from 0A004001. The issue number is SCC234CHF-2EN2, dated 2010-10, which replaced the earlier SCC234CHF-2EN1 from 2010-02. If your roller serial number falls within this range, this catalog matches. Always confirm your serial number before ordering parts to avoid getting components from a different design revision.

Stop ordering parts twice. Access the factory manual and get the correct part numbers for your CC234CHF.