Description

Dynapac CC222 Parts Catalog

If you’re cracking open a parts catalog that isn’t factory, you’re guessing at part numbers and hoping the bolt matches. That costs time and money. I’ve seen guys order the wrong bearing three times because they used a third-party listing. Stop that. The Dynapac CC222 Parts Catalog – 443 pages – is the only document that shows you exactly what Dynapac spec’d from the factory. Every exploded view, every part number, every reference comes straight from their production line. None of that aftermarket re‑drawing where dimensions shift by a millimeter.

This catalog covers the CC222 vibratory tandem roller with the DEUTZ BF4L 1011F diesel engine, valid for serial numbers 61710222 through 61710900. Dynapac released this edition (SCC222-1EN3) in December 2004, and it’s the latest issue that supersedes earlier versions. Automotive Industry Overview Understanding how OEM documentation stabilizes a fleet is part of the bigger picture Automotive Industry Overview.

Ordering Spare Parts: The Six Required Fields

Flip to the page that lists ordering instructions – every dealer expects these six data points: machine type, roller serial number, quantity, part number, part denomination, and dimensions when ordering per length. Miss one, and you’ll get the wrong piece. The catalog even includes the original multilingual text in English, Swedish, German, Italian, Spanish, and French so you can cross‑reference with your local dealer. I tell my guys to write the serial number on the cover in permanent marker – it saves a headache later.

What Serial Numbers Does This Catalog Cover?

The valid roller serial number range printed on page 3 is clearly defined: from *61710222* to *61710900*. If your machine falls outside that range, you need a different edition. The catalogue issue history shows SCC222-1EN3 replaced SCC222-1EN2 (2002‑01), which replaced SCC222-1EN1, and so on back to the original S222EN1 from 1995. Using the wrong revision means you might order parts that were superseded. Always verify your number.

443 Pages of Exploded Diagrams and Part Numbers

Every group in the catalog – frame, drum, engine, hydraulic system, electrical – is laid out with a picture on the right and a parts list on the left. The text pages are structured as shown on page 5: a notes section, group references, and change logs. You don’t have to scroll through generic drawings; each component is keyed to a specific Dynapac part number. For example, the engine section references the DEUTZ BF4L 1011F with its own sub‑assembly numbers. That level of precision is why we spec factory catalogs wholesale.

Get the Right Part the First Time

One trick I use: when I’m rebuilding a vibratory drum, I pull up the drum group page, find the bearing listed with its part number, then order based on that. No need to measure the old one with a caliper and hope. The catalog gives you the factory dimensions and the exact bolt grade. For a machine that runs 8–10 hours a day on asphalt, a wrong fastener means downtime and maybe a wrecked drum.

Related Manuals You’ll Want for the Full Picture

This parts catalog works best alongside a workshop manual. A few linked options: Dynapac CC222 CC232 CC422 CC522 CA602 Workshop Manual covers service procedures and torque specs. Dynapac CC222/422/522 Workshop Manual is another solid choice. And if you need a second copy of this same parts catalog, Dynapac CC222 Parts Catalog is the direct link.

Is this the same as a service manual?

No. This is a parts catalog – exploded views and part numbers only. It doesn’t include repair procedures or torque values.

How do I use the parts catalog with my roller’s serial number?

First, locate your roller’s serial number on the nameplate – usually on the frame near the engine. Then compare it with the valid range on page 3. If it falls within *61710222* to *61710900*, this edition is correct. If not, check the issue history on the same page to find the right revision. Once confirmed, look up the assembly group (e.g., 3 for engine, 7 for drum) and find the part number. Give that number plus your serial to the parts supplier. That’s how we do it at the shop.

Can I order parts directly from this catalog?

The catalog gives you part numbers and references. You still need to order through a Dynapac dealer or distributor – the ordering instructions on page 4 tell you exactly what information to provide.

Does it include wiring diagrams?

No. Wiring diagrams are in the workshop manual, not the parts catalog.

This Dynapac CC222 Parts Catalog keeps your parts ordering straight. Don’t rely on memory or a photocopy of a photocopy. Get the factory PDF, keep it on your tablet, and print the pages for the job. Access the Factory Manual now.