Description

Dynapac CC142C 2012 Parts Catalog – Factory Spec for Correct Parts Ordering

If you’re working on a Dynapac CC142C vibratory combination roller and you’re ordering parts off a generic aftermarket catalog, you’re asking for trouble. This Dynapac CC142C 2012 Parts Catalog (310 pages) is the only document that gives you the factory part numbers, exploded views, and correct ordering procedure. Without it, you’ll end up with wrong bolts, incompatible hoses, and a roller that sits dead while you wait for returns.

I’ve seen too many guys grab a reprint from some online seller that says ‘fits CC142C’ and then wonder why the hydraulic pump bracket doesn’t line up. That’s because those aftermarket people don’t track serial number breaks. Dynapac updates their parts catalog every time they change a supplier or revise a component. This 2012 version covers serial numbers from 2004 onward, with the latest catalogue issue SCC142C-2EN8 dated 2009-12. Page 4 shows exactly what you need to provide when ordering: type, serial number, quantity, part number, denomination, and dimensions for metered materials.

What the Dynapac CC142C Parts Catalog Actually Contains

This isn’t a service manual — it’s a parts catalog. Every page is dedicated to exploded diagrams with callouts for each part number. You get the exact fastener size, the seal type, the bearing number. The catalog is 310 pages of nothing but what you need to order the right piece. If you’re rebuilding a vibratory mechanism or replacing the water spray system, you’ll find the diagram and the part number next to each other. No second-guessing.

That’s the difference between an OEM catalog and a reprint.

Ordering Parts Without the Serial Number? Don’t Bother

Page 4 in this catalog lays out the ordering requirements in six languages. You must provide the machine type, roller serial number, quantity, part number, denomination, and dimensions if ordering per length. Dynapac tracks production changes by serial number. The catalog lists which issue applies to which serial range, from SCC142C-2EN1 (2004) through SCC142C-2EN8 (2009). If you give a parts counter guy the model but not the serial, you’ll get the wrong part half the time. I’ve seen it happen. Don’t be that guy.

3 Reasons to Choose the Factory Catalog Over Aftermarket

First, part numbers in this catalog are verified by Dynapac engineering. Second, the diagrams are drawn from the actual roller assembly — not a generic sketch that might resemble a different model. Third, supersessions and revisions are documented. Aftermarket reprints ignore those updates, so you might order a part that was replaced ten years ago. This 2012 catalog includes the latest revision history up through 2009. If you’re working on a larger Dynapac, check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec.

Engine Coverage: DEUTZ F3L 2011 and D2011 L03 I

This catalog lists parts for both DEUTZ diesel engines that came in the CC142C. You get separate sections for the F3L 2011 and the D2011 L03 I. That’s critical because the injection pump, cylinder head gasket, and even the oil filter part numbers differ between these engines. Grab the wrong one and you’ll be waiting two weeks for the return. The catalog also includes the engine serial number range so you can cross-reference. The construction equipment industry Automotive Industry Overview relies on precise parts data. For a broader look at heavy equipment, see the Automotive Industry Overview.

Who Should Buy This Manual?

Mechanics in construction equipment shops, rental yard technicians, and owners who do their own maintenance. Even if you’re a beginner, as long as you can read a diagram and match a part number, this catalog will keep you from ordering the wrong component. But don’t expect step-by-step repair procedures — that’s a service manual. This is purely for ordering replacement parts with the correct number.

Does this catalog include torque specs or repair instructions?

No. This is a parts catalog only. For repair procedures, get the service manual.

Can I use this for any CC142C regardless of year?

It covers serial numbers from 2004 through 2009, but Dynapac issued multiple catalog revisions. Check the serial number against the lists on page 3 of the catalog. Your roller might require a newer catalog if it’s a later production unit. We also carry Dynapac CC142C Spare Parts Catalogue for specific model years. Contact us if you’re unsure.

What information do I need to order parts using this catalog?

Page 4 spells it out: machine type, roller serial number, quantity, part number, denomination, and dimensions if ordering per length. Without the serial number, you risk getting the wrong revision of a part.

Is this a genuine OEM document?

Yes. It’s a scan of the original Dynapac publication, printed in Sweden.

Stop guessing part numbers and wasting shop time. Dynapac CC142C Parts Catalog gives you the factory data you need. Access the Factory Manual now and keep your roller running.