Description

Dynapac CC142 2011 Parts Catalog

If you’ve ever ordered a part for a CC142 and got the wrong piece because you trusted a third-party website, you know the frustration. I’ve seen it happen. A guy buys a seal kit off some random site, it doesn’t fit, and the machine sits for a week. That’s wasted money and downtime. This Dynapac CC142 2011 Parts Catalog from the OEM is the only way to get the exact part numbers you need. No aftermarket translation, no guesswork. Straight from the factory floor in Sweden.

What’s Inside the Parts Catalog

This document runs 208 pages and covers every bolted-on component on the CC142 vibratory roller, serial number 10000309x 0A000001 and up. The table of contents splits the book into logical groups: Service kits, Repair kits, Frame, Drum, Engine (the Deutz D2011 L03 I), Hydraulic system, Electrical equipment, Drivers platform, Decals, Standard equipment, and Optional equipment. Each section contains exploded diagrams with callouts that match the parts list directly. You don’t have to flip back and forth between a diagram and a separate index — the part number sits right under the illustration.

Why OEM Parts Documentation Beats Aftermarket Lists

Aftermarket parts catalogs are a gamble. I’ve pulled up third-party lists that show a different seal diameter because someone typed the data wrong. With this Dynapac catalog, every part number has been verified against the production line. The “Service kits” section alone lists three Deutz-specific kits: 4700938542 for the 50-hour service, 4700938543 for 500 hours, and 4700940211 for the 1000-hour interval. Those numbers are only correct if the source is the OEM. This catalog is the source.

3 Reasons to Use This Catalog Before Touching the Machine

First, you avoid ordering the wrong parts. The numerical index at the back of the book lets you look up any part number across all sections. Second, the exploded views show you exactly how every piece fits — the “Scraper kit (12 mm)” on page not applicable here, but the diagram tells you which bolt goes where. Third, the ordering instructions on page 2 tell you exactly what information your dealer needs: machine type, roller serial number, quantity, part number, denomination, and dimensions for meter goods. Hand them that list and you get the right piece the first time.

Does This Cover the Deutz D2011 L03 I Engine?

Yes. The engine section covers the complete Deutz D2011 L03 I, including the intake system, fuel system, and exhaust system. If you need the part number for the injection line or the air filter housing, it’s in there. The hydraulic system section also includes the vibration pump 4700359524 and the propulsion pump 4700372352 with their respective junction blocks. That level of detail keeps a machine running instead of sitting on cinder blocks.

Hydraulic System: Diagrams and Part Callouts

Hydraulic systems are where most roller breakdowns happen. This catalog includes a hydraulic diagram, plus exploded views of the propulsion system, rotating group, charge pump, control unit, and steering system (including the steering valve 4700902099 and steering cylinder 4700374603). The brake system is also covered. If you’re rebuilding a drum motor, the “Drum rotation kit” 4700938893 and “Eccentric shaft kit” 4700938909 are listed with the exact hardware required.

Page 2 breaks down the six pieces of information you must give your parts supplier when ordering. Skip one of those and you might get the wrong O-ring or hose length. That’s not a mistake you want when the machine is down and your schedule is shot.

Can I use this catalog to order parts for a CC142C?

This catalog is specific to the CC142 model. For the CC142C variant, look at the related manuals below.

How do I find the correct serial number range?

The catalog covers rollers from serial number 10000309x0A000001 upward. Verify your machine’s serial plate before ordering.

Are the part numbers still current for a 2011 roller?

Dynapac updates parts occasionally, but the numbers in this catalog are the original OEM references. Check with your dealer if a supersession applies.

Does this include torque specifications for assembly?

This is a parts catalog, not a service manual. It lists part numbers and exploded views but does not include torque values or repair procedures. Use the corresponding workshop manual for assembly specs.

This catalog belongs on the shelf of anyone who services a Dynapac CC142. Whether you’re a one-man shop or managing a fleet of rollers, having the OEM parts list cuts ordering time and eliminates wrong deliveries. Access the Factory Manual and keep it within arm’s reach of the workbench.

• Dynapac CC142 Spare Parts Catalogue”>Dynapac CC142 Spare Parts Catalogue
• Dynapac CC142 Spare Parts Catalog”>Dynapac CC142 Spare Parts Catalog
• Dynapac CC142C Spare Parts Catalogue”>Dynapac CC142C Spare Parts Catalogue
• Dynapac”>Dynapac
• Automotive Industry Overview