Description

Dynapac CA610D 2014 Parts Catalog

You need a part for a Dynapac CA610D vibratory roller, and you are staring at a pile of aftermarket cross-reference sheets that are wrong more often than they are right. That costs you money and downtime. I have been turning wrenches for 28 years, and I have seen guys order the wrong eccentric shaft kit because they trusted a third-party parts list. This is the OEM factory document — the Dynapac CA610D 2014 Parts Catalog, part number 4812273384, covering rollers from serial number 10000128x0C000360 onward. 254 pages of exploded views and genuine part numbers, straight from the people who built the machine.

Service Kits and Repair Kits: What the Manual Covers

The catalog breaks down every service interval with specific kits. You have the 50-hour service kit (4700945652), the 250/750-hour kit (4812157268), the 500-hour kit (4812157269), and the 1000-hour kit (4812157270). Each kit is listed with its own part number and exploded diagram. It also includes repair kits like the steering hitch kit (4700938562), eccentric shaft kit, drum rotation kit (4700938891), and shock absorber kit for the drum (4700938883). For example, if your drum rotation is out of spec, you look up that kit, get the right bearings and seals, and you are done. No guessing which O-ring fits.

Dynapac CA610D 2014 Parts Catalog: Engine and Hydraulic Sections

This engine section is for the Cummins 6BTAA-5.9 diesel. The catalog shows the cooling system, combustion air system, fuel system, and exhaust system with individual part numbers for each component. The hydraulic system is covered in depth: propulsion system front and rear (with pump 4700380830 and motor 4700373361), vibration system (pump 4700393695 with valve block 4700936609), steering system (cylinder 4700392027 and valve 4700376000), and brake system. If you need the end cap for the front hydraulic motor (4700389564), it is listed on the exploded view.

Transmission Options: Limited Slip vs No-Spin

The rear axle section covers two options: limited slip (4700385100) and No-Spin (4700383856). Each has its own differential, housing, brakes, and planet gear parts. The catalog shows the exploded view for each option so you order the correct planet gear set. Mix them up and you will be pulling the axle again.

Frame, Drum, and Decals: Don’t Overlook These

The frame section includes scrapers (spring steel), hitch, structure for cab (since SN C003981). The drum section lists drum cartridge vibration side, drive side, and drum gear. Decals are all listed with part numbers — critical for safety labeling. Standard equipment and optional equipment (fire extinguisher, heater, air conditioner, Prooftyre option) are also broken out. The catalog even includes the cab work light and wiper arm assembly. Every part you might need is in here.

How to Order Parts Using This Catalog

Page 2 of the catalog gives you the ordering procedure in six steps: machine type, roller serial number, quantity, part number, denomination, and dimensions if ordering by length. Do not skip the serial number. The catalog is valid for serial numbers 10000128x0C000360 and later, with a revision date of 2014-07 for rollers starting at C003981. If your machine falls in that range, this is the correct book. If you have an earlier model, look at the Dynapac CA610D 2010 Parts Catalog or the Dynapac CA610D 2009 Parts Catalog – OEM Spare Parts Reference. For more about the manufacturer, see Dynapac official site or read an Automotive Industry Overview for broader context.

Also available: the Dynapac CA610D Parts Catalog for the same model year.

FAQ: Common Questions

Does this catalog give torque specs or repair procedures?

No. This is a parts catalog, not a service manual. It lists part numbers, exploded views, and ordering information. For torque specs, you need the factory service manual.

Can I use this to rebuild my drum?

Yes. The drum section includes detailed exploded views for the drum cartridge (vibration side and drive side) and drum gear. You get every part number for seals, bearings, and shafts. If your CA610D serial number falls in the range covered, this catalog is the correct reference. It also shows which repair kits come pre-assembled, saving you the hassle of ordering individual parts.

How do I ensure I order the right part?

Page 2 spells it out: you need machine type, roller serial number, quantity, part number, denomination, and dimensions if applicable. Without the serial number, you risk getting a part for a different revision. The catalog lists service and repair kits separately, so double-check the kit number against your machine’s configuration.

Is this a digital access?

Yes. You get the full 254-page PDF instantly after purchase. No waiting for shipping.

Stop burning billable hours chasing wrong parts. Access the Factory Manual and get the exact OEM part numbers for your CA610D.