Description

Dynapac CA602D 2006 Parts Catalog

If you’re ordering parts for a CA602D vibratory roller, you need the Dynapac CA602D 2006 Parts Catalog – the factory parts list, not some reprint from a third party. I’ve watched guys burn a whole afternoon because they ordered a hydraulic filter that didn’t fit. This 314-page OEM document is what the dealer uses. It gives you part numbers, exploded views, and the correct denomations. Don’t trust a generic list. Trust the source that built the machine.

What’s Inside the 314-Page Parts Catalog

The catalog is organized by groups – exactly how Dynapac lays it out. You get the full breakdown of every system on the CA602D: engine (Cummins QSB 5.9C), vibratory system, drum, frame, hydraulics, electrical. Each group has multiple pages with numbered callouts and a corresponding parts list. Page 4 shows the ordering procedure in five languages – that’s how thorough the factory documentation is. You don’t need to figure out what to call a part. You read the number, you order the number.

Groups cover everything from the water spray system to the ROPS canopy. The notes section on page 5 tells you about changes and superseded items. If you’re rebuilding a roller that’s been through hell, this catalog is your roadmap.

OEM Part Numbers: Why You Need the Factory Source

Aftermarket parts catalogs often list a single number that “cross-references” to OEM. That works until it doesn’t. The CA602D uses specific seals, bearings, and hydraulic components that look like a standard part but have different tolerances. One wrong O-ring and you’ve got a leak that takes an hour to backtrack. This catalog gives you the exact Dynapac part number. No cross-reference, no guessing. You order what Dynapac stamped on the original unit.

The 2006 edition covers serial numbers from *71420604* up to *71420999*. If your roller falls in that range, this is the right catalog. Earlier or later serial numbers? Check the Dynapac website for updates. But for your machine, this is the book.

Order Spare Parts the Right Way

Page 4 lists what you need to give when ordering: machine type, roller serial number, quantity, part number, parts denomination, and dimensions if ordering by length. I’ve seen orders get rejected because a tech wrote “big bolt” instead of the part number. This catalog eliminates that. Every item has a denomination and a picture reference. You hand that to the parts counter, they pull the correct bin. End of story.

For related manuals, check the Dynapac CA602D Parts Catalog – same source. Need a different year? The Dynapac CA602D Spare Parts Catalogue might cover your serial range. Also see the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec for another model.

How This Catalog Prevents Costly Mistakes

Wrong parts don’t just cost a few bucks. They eat your billable time. You install a brake pad that’s 2mm too thick, the rotor drags, you tear it apart again. This catalog’s exploded views show you exactly how the assembly goes together. No guesswork. The part numbers are printed right next to the callouts. You don’t need to interpret a blurry scan. This is a clean, factory PDF.

Safety aspect: ordering the correct hydraulic filter or steering component is critical. A wrong part fails under pressure. This catalog gives you the OEM specs so you don’t become a statistic.

Source Validity: OEM vs. Aftermarket Documentation

This is a direct scan of the official Dynapac spare parts catalogue, issue SCA602D-2EN3 from 2006. The PDF has 314 pages, exactly as printed by the factory. No missing pages, no blurry diagrams. Aftermarket shops sometimes cobble together parts lists from multiple sources, then they swap a picture and call it a manual. That doesn’t fly in a real shop. You get a call from a customer with a leaking wheel motor, you need the right seal number. This catalog has it. Period.

The Automotive Industry Overview might tell you about manufacturing, but for the actual part numbers on your CA602D, you need the factory book.

FAQ

What if I need a part that isn’t listed?

Contact your Dynapac dealer for superseded parts.

How do I ensure I’m ordering the correct part from this catalog?

First, match your roller serial number to the range covered (*71420604*–*71420999*). Then locate the correct group (e.g., engine, vibratory) and find the exploded view. Note the item number and read the part number from the list. Write down the quantity, denomination, and any dimensions (like hose length). When you call the dealer, read them that information in order: machine type, serial, quantity, part number, denomination, dimensions. If the catalog shows a part that’s superseded, check the notes column for the new number. That’s the only way to guarantee the part fits without a return trip.

You’ve got the machine. You’ve got the catalog. Now stop wasting time with wrong parts. Access the Factory Manual from AutoRepairManuals and keep it on your tablet or print it out. One less headache, one more job done right.