Dynapac CA362PD Parts Catalog – 347 Pages of OEM Spare Parts Data

Description

Mike Callahan here. If you’re turning wrenches on a Dynapac CA362PD vibratory roller, you’ve already learned that guessing part numbers costs time and money. I’ve seen too many guys order a seal kit that doesn’t fit because they didn’t check the serial number break. That’s why you need the factory Dynapac CA362PD Parts Catalog — 347 pages of original OEM part listings, not some aftermarket scan that skips half the illustrations. This is the same document the dealer uses.

Ordering Spare Parts: The Six Pieces of Information

Page 4 of this catalog spells it out. To avoid errors in delivery, you need six things: type of machine, roller serial number, quantity, part number, part denomination, and dimensions if ordering per length. I’ve watched mechanics skip the serial number and end up with wrong bearings. Don’t be that guy. The catalog documents exactly which serial number range each revision covers (SCA362PD-2EN1 through -2EN4, with serial number starting 72520369). Follow that system.

7 Groups and 347 Pages of OEM Data

Organized by groups — engine, vibratory system, frame, hydraulics, electrical, steering, and drum assembly. Each group has exploded diagrams with callout numbers referencing the parts list. Need the part number for the Cummins 6BTAA 5.9C oil filter? It’s in there. Published by Dynapac (part of Atlas Copco Group), not some third-party reprint house. That matters when the part number has to match the casting.

What This Parts Catalog Covers

The CA362PD is a vibratory roller with a Cummins 6BTAA 5.9C diesel engine. The catalog covers every serviceable component: engine parts, drive train, vibration mechanism, steering, brakes, electrical, and the roller drum assembly. If you’re rebuilding the vibratory shaft, you’ll need the correct shim thickness and seal part numbers. This catalog lists them. Pair it with the service manual for torque specs — I recommend Dynapac CA362PD Parts Catalog as a companion.

Why OEM Documentation Beats Aftermarket Scans

Aftermarket “parts catalogs” often merge multiple revisions into one file, so you end up with a part number that superseded last year. This is a factory-printed catalogue — the exact PDF from Dynapac’s publication department. The page 2 disclaimer states they reserve the right to change specs, so if you have a roller built after 2008, you need the -2EN4 issue. The catalog shows the validity dates: SCA362PD-2EN4 is valid from 2008-10. If you’re working on older rollers, you might need the earlier issues. Dynapac CA362D CA362PD Parts Catalog links them together.

Using the Parts Catalog with Your Serial Number

Every Dynapac CA362PD has a serial number stamped on the frame. That number tells you which revision of the parts catalog applies. The front matter of this PDF includes a table: “Valid from roller serial number” — and it lists the break point. For example, the -2EN1 catalogue was valid from 2003-05. If your roller falls after that, you need a later issue. This file covers up to -2EN4, so most machines through 2008 are covered. Always check the serial number before ordering.

Technical Tips for Ordering Fasteners

Fasteners are listed with specific part numbers. I’ve seen mechanics think they can use a grade 8 bolt from the hardware store. That’s a liability. Dynapac specifies OEM fasteners with correct thread pitch, length, and hardness. If the catalog calls for a special flange bolt, buy that part. The illustrations show exactly where each fastener goes. Use this catalog to build your parts list before you tear down the machine. Saves you from finding a missing snap ring at 5 PM.

FAQ

Can I use this parts catalog for a different Dynapac model?

No. This catalog is specific to the CA362PD vibratory roller. For other models, look for their respective parts catalogs. DYNAPAC CA362PD Vibratory Roller Spare Parts Catalogue is the direct link.

Does the catalog include torque specifications?

This is a parts catalog, not a service manual. It does not contain torque values. However, it lists the exact fasteners, so you can look up the correct torque in the factory service manual. For example, the vibratory shaft bearing nuts require specific torque; the parts catalog gives you the nut part number, and the service manual gives you the ft-lb value. Both documents work together. If you’re looking for torque specs, you’ll need the Dynapac CA362PD Service Repair Manual. The Automotive Industry Overview may not help here, but the factory manual will. Check Automotive Industry Overview for general context on equipment standards.

You need this manual if you’re ordering parts for a Dynapac CA362PD. It’s the only way to guarantee you’re getting OEM-spec components. Stop wasting time on cross-references that don’t match the serial number. Dynapac CA362PD Parts Catalog (already linked) is your starting point. Access the Factory Manual and keep it on your tablet or print the pages you need. Your parts counter will thank you, and your roller will run without leaks.