Description

Dynapac CA280D 2006 Parts Catalog – No Aftermarket Guesswork

I’ve been wrenching on heavy equipment for twenty-eight years. If you’re ordering parts for a Dynapac CA280D 2006 Parts Catalog without the factory book, you’re going to end up with wrong bearings, misdrilled hydraulic flanges, or a delivery full of bits that don’t fit. Aftermarket parts lists cut corners – they reprint old drawings, swap part numbers, and skip the revision history. This one is the real deal. Printed in 2006 by Dynapac Sweden, 204 pages, covers serial numbers from *68920361* onward. It’s the same book our shop used when we had a CA280D come in with a blown hydrostatic motor last spring. Saved three days.

Engine and Serial Number Coverage

This catalog is valid for rollers equipped with the Cummins 4BTAA 3.9C diesel engine. You need to match your machine’s serial number – the cover tells you the exact range. Page 3 states the valid serial numbers: from *68920361* up to the last 2006 production. If your roller falls outside that range, you need the next revision. The catalog has been updated twice: SCA280D–2EN1 (2004–04) replaced by SCA280D–2EN2 (2004–11), then by SCA280D–2EN3 (2006–02). This is the final version for that serial block.

What Does the Parts Catalog Actually Cover?

Exploded-view drawings for every major assembly – frame, drum, cab, hydraulic system, engine accessories, steering, brakes, and electrical. Each group is numbered (Group 3 starts on page 5 – see the notes section). The parts list table gives you the part number, quantity, description, and any remark codes. You won’t find torque specs here – that’s in the service manual. But if you need the seal kit for the vibratory motor, the part number is right there, and you know it’s the factory unit because Dynapac stamped the drawing with their own numbering scheme.

204 Pages of Exploded-View Diagrams

That’s 204 pages, not 50. Each page has one or two large figures with callouts. The book is heavy enough to hold down the service truck floor. You get the complete hydraulic plumbing schematic (Group 5), drum drive group (Group 6), and the engine mount layout (Group 4). The last few pages are reserved for notes and a change log – useful when you find a superseded part. Cross‑references to earlier catalog issues are listed so you don’t order a bracket that got redesigned in 2005.

Order Spare Parts the Right Way

Page 4 spells out the six pieces of information you need when ordering: machine type, roller serial number, quantity, part number, part denomination, and dimensions for meter goods. Miss any one of those and the parts counter sends you the wrong item. I’ve seen shops waste a week because they gave the wrong serial number. This catalog has the exact denomination in English, plus the remark codes for special notes (e.g., “Variant for cold climate”). Stick to the factory ordering process, and you get the right part the first time.

Source Validity: OEM vs. Aftermarket

Aftermarket catalogs often merge multiple model years into one document and change part numbers to their own internal system. Not this one. It’s the original Dynapac publication, printed in Sweden, part number SCA280D–2EN3. Every figure, every part number, every page was reviewed by Dynapac’s engineering team. If you need a part for a CA280D, you want the Dynapac CA280D Spare Parts Catalogue Dynapac CA280D Spare Parts Catalogue. Later revisions exist for CA280D–II, but they differ in the drum assembly. Check the Dynapac CA280D CA280D-II Spare Parts Catalogue Dynapac CA280D CA280D-II Spare Parts Catalogue if you have the II series. And for the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec covers a different paver line – don’t mix them up.

For more background on the manufacturer, read about Dynapac Dynapac on the company site. You can also check the Automotive Industry Overview for context on how OEM documentation standards protect your shop from liability. This catalog does that.

Frequently Asked Questions

Does this manual cover the CA280D with a different engine option?

No. It only covers the Cummins 4BTAA 3.9C. If your roller has a Deutz or Perkins, you need the corresponding parts catalog for that engine package.

How do I find the correct serial number?

Look at the plate on the right side of the frame near the engine. The format is *68920361* – that number tells you if this catalog matches. The valid range starts at *68920361*.

Are torque values included in this parts catalog?

No.

What is the difference between this catalog and the service manual?

This parts catalog gives exploded diagrams, part numbers, and ordering instructions. The service manual gives repair procedures, torque specs, and troubleshooting. You need both for a complete rebuild. The service manual has the step-by-step instructions; this one has the parts breakdown. Together they cover everything from disassembly to reordering seals.

If you maintain a fleet of compactors or just own one CA280D, you need the original book on the bench. Don’t rely on a photocopy or a third-party scan that’s missing pages. Get the exact OEM document that Dynapac released in 2006. Access the Factory Manual now and stop guessing which parts go where.