Description

Dynapac CA250D Parts Catalog

You’ve got a Dynapac CA250D Parts Catalog on the bench, and you’re about to order parts for that 2006 CA250D that’s been sitting with a blown hydraulic line. I’ve been wrenching for 28 years, and I’ve seen more botched orders from aftermarket part number lists than I can count. This 222-page factory catalogue is what Dynapac themselves use to pull parts off the shelf. It’s not a service manual – it won’t tell you torque specs or repair procedures – but if you need the right bearing, hose, or seal, this is the only source you should trust.

Ordering Spare Parts: Get It Right the First Time

Flip to page 4 of the PDF. Dynapac literally prints the ordering procedure in six languages because they know how many screw-ups happen. You need: machine type, roller serial number, quantity, part number, parts denomination, and length if it’s a bulk item. Miss any one of those and you’ll get the wrong piece. The catalog explodes every assembly – engine, drive train, vibration system – with callouts tied to part numbers. Aftermarket websites will give you a generic list that might fit a different serial range. This catalogue is specific to the CA250D with serial numbers starting *65820251*- under catalogue issue SCA250D-2EN3.

Engine and Serial Number Cross-Reference

Every CA250D in this catalogue runs the CUMMINS 4BTAA 3.9C diesel. If your machine has a different engine, this won’t match. The serial number validation is printed right in the front matter – you need to check your roller’s serial against the list of valid catalogue issues: SCA250D-2EN1 (2003-04), replaced by SCA250D-2EN2 (2004-11), then SCA250D-2EN3 (2006-02). The document covers serial *65820251*- upward. If yours falls outside that range, you’re looking at the wrong edition. Dynapac maintains strict revision control, and this catalogue matches the 2EN3 issue.

222 Pages: What’s Inside the Parts Breakdown

Each group – engine, transmission, vibration, steering, brakes – gets its own section with exploded isometric drawings. The text pages use a structured layout with a remarks column (Group, Page, Notes, Parts Service Info, Info, Changes). You can trace a part from the drawing to the numerical list, grab the 6-digit part number, and order with confidence. No aftermarket cross-reference that substitutes a $20 part with a $120 one because someone misread the dimensions. The catalogue even includes a notes page for your own field updates – see page 5. That’s the kind of detail you get when you buy from the factory source, not a third-party reprint.

Why Trust This Parts Catalog Over Aftermarket Lists?

I’ve had customers walk in with aftermarket part lists printed from forums. Half the numbers were wrong. The other half didn’t match the revision levels. This catalogue comes straight from Dynapac’s spare parts department – Box 504, 371 23 Karlskrona, Sweden. It’s the same document the dealer uses to look up your order. If you’re working on construction equipment, you know that one wrong bolt can stop a job for a day. This 222-page book eliminates that risk. The Dynapac CA250D Parts Catalog is exactly what it says: the OEM spare parts catalogue for the CA250D vibratory roller. No abbreviations, no guesses.

Real-World Use: Keeping the CA250D Running

You’re a home garage enthusiast? Maybe you bought a surplus CA250D for a farm project. You don’t have a dealer relationship. This catalogue lets you call any Dynapac parts counter and give them the exact part number – they can’t argue with you because you have the factory drawing. If you need the matching service manual with torque specs and repair steps, look at the Dynapac CA250D 2006 Parts Catalog – Factory Spare Parts Guide for the correct series. For other machines in the Dynapac line, check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec – same quality, different machine. And if you want broader context on how these machines fit into the Automotive Industry Overview, it helps to understand that OEM documentation is the only standard that matters on a job site.

Does this parts catalog include torque specs or repair procedures?

No. This is a spare parts catalogue only – part numbers, exploded views, and ordering info. For torque values and step-by-step repair, you need the service manual for the CA250D.

What serial number range does this catalog cover?

It covers Dynapac CA250D rollers with serial numbers from *65820251* upward, under catalogue issue SCA250D-2EN3 (2006-02). Earlier issues (2EN1, 2EN2) exist for older machines. Check your roller’s serial plate before ordering any parts.

Can I use this to order parts for a CA250 with a different engine?

Not reliably. This catalog is specific to the CUMMINS 4BTAA 3.9C. If your machine has a Deutz or other power unit, you need the corresponding parts catalog for that engine code.

How many pages and is it a scan or OCR?

222 pages, factory-original PDF with searchable text and high-resolution drawings. It’s not a photocopy – it’s the official digital issue from Dynapac.

If you’re tired of cross-referencing wrong numbers and want the actual factory breakdown, this is what you need. Access the Factory Manual.