Description

Dynapac CA152D 2009 Parts Catalog – Factory Parts Breakdown for Your Vibratory Roller

Ordering parts for a vibratory roller is not like picking up wiper blades at the auto parts store. One wrong number and the machine sits while you wait a week for the right bearing or hose assembly. Aftermarket catalogs that claim to cover the Dynapac CA152D often combine multiple models on one page or use generic diagrams that don’t match the actual serial number range. That’s why this 2009 Parts Catalog exists. 288 pages of OEM-specific drawings, callouts, and part numbers printed by Dynapac themselves. If you are maintaining a CA152D with a Cummins QSB 3.3 engine, this is the only source you should trust to pull a part number.

Ordering Spare Parts: The 6-Point Checklist

Page 4 of the catalog spells out exactly what Dynapac expects when you call or email a dealer. Six pieces of information: machine type, roller serial number, quantity, part number, part denomination, and dimensions when ordering by length. Skip any one of those and the wrong part shows up. The serial number is critical—Dynapac changed revisions mid-production, and the parts catalog lists which serial numbers each part applies to. That level of detail doesn’t exist in third-party reprints. If you have a CA152D built after serial number 64222400, you need the SCA152D-3EN2 catalogue issue (this one).

Engine Coverage: Cummins QSB 3.3

The CA152D uses a Cummins QSB 3.3 diesel engine. This parts catalog covers the engine subgroup—fuel system, cooling, air intake, and mounting hardware. Exploded views show every gasket, injector line, and bracket. You get the OEM part number, not a cross-reference. That matters when the aftermarket catalog shows a generic fuel filter that doesn’t match the thread pitch. The Cummins section alone is worth the access for anyone who’s fought with a mislabeled injector return line.

Parts Catalog Structure: Navigating the 288 Pages

Page 5 explains the layout. Each group is numbered (e.g., Group 3 for engine). Within each group, text pages list the parts with remarks—notes about superseded parts, painted vs. unpainted versions, or special order items. The remarks column is where Dynapac flags changes. For example, if a bolt was replaced by a longer one in a later serial number range, you see it in the remarks before you order the old part. The picture pages show exploded views with reference numbers that match the text list. You navigate by group and page number, not by flipping through random scans. That structure is consistent across all Dynapac OEM parts catalogs.

Why Factory Specs Matter for the CA152D

Vibratory rollers take serious stress. A wrong part number on a vibration isolator or hydraulic motor can cause misalignment, vibration damage, or uncontrolled dump cycles. OEM parts catalogs like this one include the correct part number, material grade, and torque specs for the fasteners—though torque values are in the separate service manual, not this catalog. Still, having the genuine part number eliminates the guesswork when ordering bearings, seals, and filters. Aftermarket catalogs often consolidate multiple filter numbers into one, and that can lead to reduced flow or incorrect bypass pressure. For a machine that works compaction, that’s not a risk worth taking.

Who Needs This Parts Catalog?

Fleet mechanics managing multiple CA152D rollers. Owners who store spare parts and need to verify inventory. Even home mechanics trying to keep an older roller running. The catalog is written in English, with Swedish and German headers for ordering instructions. It is not a repair manual—there are no step-by-step procedures or wiring diagrams. But if you need to find the correct part number for a hydraulic pump seal on a CA152D, this is the document. Pair it with the Dynapac CA152D Parts Catalog and the Dynapac CA152D Spare Parts Catalogue if you need a different revision. The serial number ranges tell you which one fits your machine. For reference, the SCA152D-2EN4 revision (earlier) is available as DYNAPAC CA152D Spare Parts Catalogue SCA152D-2EN4.

Source Authenticity: OEM vs. Aftermarket

Dynapac, now part of the Atlas Copco Group, prints these catalogs in Sweden. That matters because aftermarket shops often take a factory PDF, crop the margins, and re-label it as a generic “parts guide.” Those rip-offs miss the remarks column or leave out the revision history. This is a direct scan of the original published catalogue issue SCA152D-3EN2 dated 2009-04. You get the same information a Dynapac dealer pulls up on their screen. For a broader view of how documentation standards apply across the Automotive Industry Overview, consider that OEM documentation is still the benchmark for accuracy.

FAQ – Dynapac CA152D Parts Catalog

Can I use this catalog for a different model?

No. This catalog is specific to the CA152D roller. Using it for another model will give wrong part numbers.

How do I find a specific part number?

Start with the group index at the front of the catalog. Find the group that covers the subsystem (e.g., engine, hydraulics, vibration). Turn to that group’s text page. The exploded view on the facing page shows reference numbers. Match the number to the parts list. Check the remarks column for supersession notes or serial number cut-offs. If you have a machine with a serial number near a change point, double-check that your part falls in the correct range.

Does this include exploded diagrams?

Yes. Each group has one or more picture pages with exploded views and callout numbers. These are OEM line drawings, not low-res aftermarket scans.

Is this a service manual?

No. This is a parts catalog only. You need the separate service manual for repair procedures and torque specs.

If you are tired of ordering the wrong filter or spending hours cross-referencing part numbers from three different websites, get the real thing. This 288-page PDF gives you the exact list of every part on the CA152D as Dynapac designed it. Access the Factory Manual now.