Description

Doosan DX700LC 2010 Service Manual – Factory OEM Shop Manual

If you are turning wrenches on a Doosan DX700LC 2010 Service Manual is the only source you should trust. Not a photocopy. Not a third-party reprint. The original 2010 Service Manual from Doosan. I have seen guys snap bolts because they used a generic torque chart from a forum. That mistake costs time and parts. This manual has 1190 pages of the actual procedures Doosan wrote for their own machines. Page 1 confirms it is for serial number 5001 and up – check that before you start. Page 5 lists every chapter so you can find the section you need without flipping through half the book.

Safety Procedures Before Touching This Machine

Start with the Safety chapter. Doosan calls it Track Excavator Safety SP002135. It covers everything from fire hazards to high-voltage cables. If you are working near power lines, that section alone is worth the price. There is also a subsection on track tension adjustments – do that wrong and you can get hurt. The manual tells you the correct blocking and support procedures. Never skip this part. I have seen too many guys treat safety like a suggestion. It is not.

Specifications and Performance Test Data

This manual includes the Specifications chapter (SP002136) with general dimensions, working range, engine performance curves per DIN 6270 standard. You get approximate weight of workload materials. There is a full set of performance tests: travel speed, swing speed, cylinder tests, hydraulic cylinder natural drop test, travel motor jack-up test. If you need to verify a machine is operating within spec after a rebuild, these are the numbers to use. The test conditions are listed so you can replicate them exactly.

Hydraulic System Troubleshooting – Factory Steps

The Hydraulics section (SP002166) is where most of the action is. It covers troubleshooting, testing, and adjustment procedures for the entire hydraulic system. The accumulator and center joint (swivel) have their own subsections. Doosan gives you step-by-step checks for pressure and flow. No guesswork. You follow the diagnostic tree, you find the problem. Manual Transmission is for a different machine, but the same principle applies – factory data beats guesswork every time.

Standard Torques: Why OEM Data Matters

Standard Torques SP000813 has the torque values for common fasteners. But each assembly chapter also lists specific torques for that component. If you are replacing a swing reduction gear or tightening the track adjuster, you need those numbers. Aftermarket manuals often round off torque values or use generic ranges. That is how you strip threads or get leaks. Doosan gives you the exact ft-lbs for every bolt. Use them.

3 Key Chapters You Will Use Repeatedly

Safety, Specifications, and Hydraulic Troubleshooting. That is the core. The Safety chapter keeps you alive. The Specifications chapter gives you the data to set up the machine correctly. The Hydraulic Troubleshooting chapter saves you hours of diagnostic time. If you also work on other Doosan equipment, check out Doosan V2403 Service Manual – Factory OEM Specs for Marine Engine for marine engine specs.

Is this manual specific to the DX700LC model?

Yes, it covers DX700LC serial number 5001 and up only.

Does it include wiring diagrams?

The manual includes electrical and hydraulic schematics within the Upper Structure and Hydraulics sections. The Cabin chapter (SP002148) covers wiring for the operator’s compartment. The Hydraulic System Troubleshooting chapter includes test procedures and adjustments. However, if you need full electrical wiring diagrams for the entire machine, you should check the Table of Contents on page 5. The manual does have a section on the Center Joint (swivel) and accumulator. But for detailed pinout diagrams, you may need the separate electrical manual. This service manual focuses on mechanical and hydraulic repair.

What torque specs are included?

Standard Torques SP000813 provides factory torque values for common fasteners. Additionally, each assembly chapter lists specific torques for that component.

Can this manual be used for other Doosan excavators?

No. This manual is for the DX700LC only. Using it on a DX800 or different model will give wrong specs. Doosan has separate manuals for each model. See Doosan P158LE P180LE P222LE PU158TI PU180TI 2008 Service Manual for other engines.

You need the real thing. Not a copy. Not a scan. The OEM shop manual from Doosan. Access the Factory Manual from AutoRepairManuals and get the job done right.

Related Manuals

• Doosan P158LE P180LE P222LE PU158TI PU180TI 2008 Service Manual
• Doosan D33S, D35C, D20/25/30S, G20/25/30P-5 2008 Service Manual
• Doosan D33S, D35C, D20/25/30S, G20/25/30P-5 2008 Service Manual
• Manual Transmission