Description

Dieci AGRI PLUS 40.7, AGRI PLUS 40.7 H Parts Catalog – What You Need on the Workbench

You are ordering parts for a Dieci telehandler. You pull up an aftermarket parts site, punch in the model, and get a list of part numbers that don’t match the bracket on your bench. Waste of time, wasted money, and the machine sits. I’ve seen it happen more times than I care to count. The Dieci AGRI PLUS 40.7, AGRI PLUS 40.7 H Parts Catalog fixes that. This is the factory document – the same one Dieci dealers use to pull genuine parts. 247 pages of exploded views, group divisions, and exact part numbers. No aftermarket transcription errors.

247 Pages of Factory Parts Data

This catalog gives you the full breakdown of both the AGRI PLUS 40.7 and the AGRI PLUS 40.7 H. Page after page of isometric drawings with callouts. Every bolt, seal, hose, and bracket is labeled with the official Dieci part number. If you need to order a replacement hydraulic fitting or a specific bearing, you flip to the right group and read the number off the page. No cross-referencing, no second-guessing. The document groups assemblies by function – engine, transmission, boom, cab, hydraulics, electrics, and more. Each group has its own set of plates with the parts listed in a table underneath.

Group Division: Finding the Right Assembly

The catalog is split into groups. On the first few pages you get an index that tells you which group covers what. For example, group 30 covers the engine, group 40 covers the transmission, group 80 covers the boom structure. Within each group, the component plates show you exploded views of the assembly. The parts list next to each drawing gives you the part number, description, and quantity per machine. If you see a note like “OPTIONAL” next to a part, that means it was not fitted on the base machine – you’ll need to verify your machine’s serial number with the service department before ordering. This is clearly marked in the catalog (see the legend on page 3).

Does This Catalog Cover Both the 40.7 and 40.7 H?

Yes, it covers both models. The AGRI PLUS 40.7 H is the high-capacity variant. The catalog identifies parts that are specific to the H model with separate part numbers. You will see sections where the H model has a different boom cylinder or a reinforced axle. The same group plates are used, but the parts table shows two lines when a part differs. Always check the model designation next to the part number before quoting. I’ve seen techs order the wrong brake caliper because they assumed the base model part was the same. It’s not. Use this catalog.

Language Coverage: Five Languages in One Document

The document includes Italian, English, Spanish, French, and German – that’s what the file name tells you (it-en-es-fr-de). Each page has the drawing and the part numbers. The text headers and footnotes appear in all five languages. If your crew works in Spanish or French, they can read the group titles and footnotes without translation. The part numbers themselves are universal. You don’t need to speak Italian to order a part – you just point at the number.

Part Number Accuracy: OEM vs Aftermarket

Aftermarket parts catalogs frequently transpose digits or combine parts that should be separate. Dieci’s factory catalog has been through their engineering review. The part numbers listed here are the ones engraved on the actual components. I’ve personally confirmed this on a Dieci Zeus – the part number from the factory catalog matched the stamped number on the part. That’s not always the case with third-party reprints. If you want to be sure you’re ordering the correct bearing or hydraulic motor, use the OEM source. This is it. Automotive Industry Overview explains why OEM documentation is critical for safety components – wrong fasteners can fail.

Get the Right Part Number – Avoid Extended Downtime

Every hour a machine sits waiting for a wrong part costs money. The Dieci AGRI PLUS 40.7, AGRI PLUS 40.7 H Parts Catalog eliminates the guessing. Print the exploded view, circle the part, hand it to your parts guy. Done. The document is a PDF, downloadable, printable. Keep it on your tablet in the shop or on your phone in the field. 247 pages cover everything from the engine assembly to the cab interior. The group structure means you can find a part in under 30 seconds once you know which system it belongs to.

Frequently Asked Questions

Does this catalog include service procedures or torque specs?

No. This is strictly a spare parts catalog. It contains exploded views, part numbers, and quantities. For service procedures, torque values, and fluid capacities, you need the corresponding service manual. Automotive Industry Overview covers more.

Can I use this catalog for the AGRI PLUS 40.7 H only?

Yes. The catalog covers both models on the same pages. Parts unique to the H are marked.

What languages are the part numbers and descriptions in?

Part numbers are numeric. Descriptions appear in Italian, English, Spanish, French, and German. The group headers are in all five languages.

How are parts organized – by system or by location on the machine?

By functional group. Engine, transmission, hydraulics, boom, cab, electrics, etc. Each group contains several exploded-view plates. The index at the beginning lists every group and its plate numbers. You navigate by group, then by plate. It is not organized by physical location on the machine, but by system. For example, all hydraulic components are in group 70 regardless of where they physically sit on the chassis. This is standard for most OEM parts catalogs.

If you are working on a Dieci AGRI PLUS 40.7 or AGRI PLUS 40.7 H, get the real parts data from the source. Aftermarket catalogs are a gamble. This 247-page Parts Catalog is the original factory document – nothing else compares. Access the Factory Manual and keep your parts ordering accurate. Related catalogs: Dieci Zeus 37.7 Parts Catalog – OEM Spare Parts Manual, Dieci Zeus 35.10 Parts Catalog – OEM 227-Page Parts Breakdown, and Dieci XRM 732 Parts Catalog – OEM Spare Parts Manual 215 Pages.