Description

Deutz Fahr HD 360 Parts Catalog – Factory OEM, 154 Pages

I’ve pulled enough wrong parts off the shelf because some aftermarket sketch said “fits all models.” That day you have a baler down in the field while the delivery guy brings back the wrong seal – you remember why you get the factory book. This Deutz Fahr HD 360 Parts Catalog is the real thing: 154 pages, OEM Deutsche/English/French/Spanish, straight out of the plant. None of those compressed PDFs where part numbers are smeared. This is the document FAHR used to build the machine from serial number 101 onward.

154 Pages of Exploded Views and Part Numbers

Every major assembly on the HD 360 high-density pick-up baler is drawn out – the pick-up, the plunger, the tying mechanism, the driveline. The part numbers are listed next to each component, with the official FAHR order code. You won’t find “reference only” marks; these are the actual production numbers. Need to verify a bearing race for the rotor? Flip to the driveline section. The drawings are crisp – you can read the callouts even on a phone screen, though I’d print the sheet you’re working from.

Ordering Directives: What Information You Must Provide

Page 2 spells it out in four languages. Machine type and chassis number, quantity, order number and designation, desired mode of dispatch, exact address with postal code. If you ship by rail, include the station. I’ve had dealers refuse a warranty claim because the chassis number was missing. This page saves you that headache. Also note the caution: the illustrations might differ from the current production part if improvements occurred after printing. If you can’t identify the number with certainty, send a sample. They’ll scrap unused samples – that’s how strict FAHR is about getting the right part.

Hydraulics and P.T.O. Shaft Parts Guidance

The catalog includes a dedicated section on hydraulics and P.T.O. shaft parts. The tip: during repair, replace only seal components for hydraulic cylinders; for everything else, replace the whole assembly. That keeps leaks off your floor and prevents internal contamination. The part numbers for the shear bolts, universal joints, and yokes are listed with the correct spline counts. No guessing on which u-joint fits the HD 360 – it’s right there.

Why You Need the OEM Document for Parts Identification

I’ve watched guys spend an hour flipping through a third-party parts website that lists the same number for five different models. That’s not “close enough” – that’s a day waiting for a return. This catalog came from the same plant that built your machine. Every exploded view corresponds to the real assembly sequence. When you call your dealer, you read them the number off the page, and the part shows up. No cross‑reference games. The SAME Deutz FAHR HD 300 Parts Catalog – 108 Page OEM Factory Manual is for the smaller baler; this one is specifically for the HD 360. If you also work on the RAPS unit, grab the Deutz Fahr Raps Parts Catalog – Factory Exploded Views & Part Numbers for that line.

Who This Catalog Is For

Farmers running a Deutz Fahr HD 360 baler. Shop mechanics who maintain mixed fleets. Small‑engine repair guys who get called out for a baler that won’t tie. If you’re ordering parts for a machine built after chassis number 101, this is your reference. It also helps when you need to reverse‑engineer a broken bracket – the exploded view shows how everything nests. The Deutz Fahr M2680 Parts Catalog – Factory OEM Manual covers the M2680 tractor, but the baler catalog has its own unique assemblies not shared with tractors. Buy the right book for the right machine.

Source Authenticity – OEM vs. Aftermarket

This is a direct scan of the printed FAHR parts list, not a re‑keyed third‑party version. The original file name is DEUTZFAHR_HD_360_Parts_Catalog_de-en-fr-es-24014002075.pdf. Compare that to the generic “Deutz Fahr Parts” PDFs you find on random forums – those often mix years and models. Here, the language and torque values are consistent because they came from a single publication. I’ve seen enough aftermarket catalogs swap the drive chain part number for a cheaper substitute that fails under load. Don’t risk a field breakdown.

FAQ – Common Questions About the Deutz Fahr HD 360 Parts Catalog

Does this catalog include engine part numbers for the HD 360?

It covers the baler-specific assemblies – pick-up, tying, driveline, hydraulics, and frame. The engine (if your HD 360 uses a separate tractor PTO) is not included. For engine internals, you need the tractor’s factory manual.

Can I use this catalog to order parts for a Deutz Fahr HD 350?

No. The HD 350 has a different pick-up width and tying layout. Order the HD 300 catalog if needed [LINK_ID_REL_0] – but the HD 360 uses unique numbers.

Are torque specifications listed in this parts catalog?

No.

Is the manual available in English?

Yes. It’s a four-language edition: German, English, French, and Spanish. The English directives on page 2 are clear. The parts lists are multilingual with separate columns for each language, so you can read the part names in your preferred language.

Look, you can keep using that photocopied list from the previous owner, but the part numbers will be wrong three times out of ten. Access the Factory Manual, pull the number off the page, and get the job done. The Automotive Industry Overview covers general trends, but for this specific baler, the factory catalog is what works. Automotive Industry Overview is background reading – the catalog is the tool.