Daewoo Solar 220LC-V Workshop Manual – 600 Pages Factory Service Data

Description

If you’ve ever torqued a swing bearing bolt to a guess instead of a factory spec, you already know why this book matters. The Daewoo Solar 220LC-V Workshop Manual is not a third-party reprint. It’s the original OEM document — 600 pages of the same material Daewoo dealers use. I’ve seen too many machines come in with stripped threads and hydraulic leaks because some aftermarket PDF had the wrong values. That doesn’t happen when you’re working from the factory source.

This manual covers serial number 0001 and up. The first page identifies the publication number 2023-7115AE. You want the real thing? This is it.

Safety Section: More Than Just Warnings

Page 5 of the table of contents lists “Track Excavator Safety” as the first major section. That’s not filler. The manual walks through every scenario — high-voltage cable avoidance, lifting with slings, travel on sloping terrain. It even tells you how to install solid support blocking and when to replace safety-critical parts. If you’re running a shop or working alone on a Solar 220LC-V, this section keeps you out of the hospital. Read it before you start any repair.

Specifications for the Solar 220LC-V: Page 1 Sets the Baseline

Right there on page 1, you get the model designation and serial number range. The “Specifications” chapter (section S0205000) includes general dimensions, working range, and engine performance curves per KS-R1004 standard. Need the approximate weight of workload materials? It’s in there. If you’re replacing a boom cylinder or adjusting track tension, those numbers are what you need — not a guess from a forum post.

Does This Manual Cover the Hydraulic System Troubleshooting?

Yes, and it’s organized for a mechanic, not a writer. Section S0702070 is “Hydraulic System Troubleshooting, Testing and Adjustment.” That chapter alone can save you hours of chasing a pressure loss or a sluggish swing. It includes test conditions, travel speed tests, and cylinder performance tests. The accumulator section (S0703000) and center joint give you the disassembly and inspection steps. No generic diagrams — OEM schematics.

General Maintenance Procedures: Welding and Hydraulic Precautions

Section S0302000 covers welding precautions, hydraulic system cleanliness, and oil leak precautions. The manual tells you exactly how to clean and inspect bearings and what to do before any service — lockout procedures, warning tags, and proper blocking. “Standard Torques” (S0309000) gives you the factory torque values for fasteners across the machine. That’s where you stop guessing and start torquing to spec.

Factory Data vs Aftermarket: Why It Matters for the Solar 220LC-V

Aftermarket manuals often leave out critical notes like “Use Correct Replacement Fasteners Tightened to Proper Torque” — which is taken directly from the maintenance chapter. The OEM manual includes all the safety alert symbols and signal words. If you’re rebuilding the swing reduction gearbox (section S0408010) or replacing the fuel transfer pump (S0405500), you want the official procedure. I’ve been doing this 28 years. You can tell the difference when a bolt comes loose on a jobsite.

The engine performance curves and general specifications are based on the Internal Combustion Engine used in this model. Also, although the Solar 220LC-V uses hydrostatic drive, familiarity with Manual Transmission fundamentals helps when servicing the reduction gearbox.

Related Manuals for This Platform

• Daewoo Solar 2001 Service Manual (130LC-V, 170LC-V, 220LC-V, 250LC-V, 220N-V)
• Daewoo Solar 220LC-V Workshop Manual – 570 Pages of OEM Specs
• Daewoo SOLAR 010 1997 Workshop Manual – OEM Bus Repair Specs

Frequently Asked Questions

Does this manual include wiring diagrams for the electrical system?

The manual covers electrical components such as the fuel transfer pump, cab systems, and battery maintenance precautions. However, dedicated full-color wiring schematics are not listed in the table of contents. For deep electrical diagnostics, you may need a separate electrical supplement. Check the section on “Fuel Transfer Pump” (S0405500) and “Cab” (S0402000) for component-level wiring within those chapters.

Is this manual specific to the Solar 220LC-V model?

Yes, it covers only the Solar 220LC-V with serial numbers 0001 and up. Do not use for other variants.

You’re not going to find a reprinted copy or a summarized guide that beats the original. If you’re working on a Solar 220LC-V, you need the factory specs — torque values, clearances, safety procedures. That’s what this 600-page manual delivers. Access the Factory Manual and get the OEM data on your bench instead of relying on memory or guesswork.