Description

Daewoo Solar 170LC-V 2000 Workshop Manual

If you’re tearing into a Daewoo Solar 170LC-V from 2000, you already know the difference between a service that holds and one that leaks down by lunch. This is the original factory workshop manual—606 pages of what Daewoo engineers wrote for their own techs. It’s not a generic “covers all models” PDF. It’s serial-number-specific (1001 and up), published October 2000, and it has the torque values for split flanges, hose clamps, and metric fasteners that your third-party copy gets wrong.

Specifications for Solar 170LC-V – What You Get

You get engine performance curves per KS-R1004 standard, general dimensions, working range specs, and component location diagrams. The manual walks you through component locations so you’re not hunting for the swing bearing grease fitting on a machine that’s already on the lift. Page references? The spec section starts at S0205030 and runs into performance test procedures—no guesswork on pump flow or swing speed.

Standard Torques and Fastener Data

I’ve seen three different aftermarket manuals claim 85 ft-lbs on a M14 metric bolt that’s supposed to be 100 ft-lbs. This manual gives you the correct torque values for standard metric fasteners, U.S. fasteners, Type 8 phosphate coated hardware, hose clamps, and split flanges. There’s even a table for torque wrench extension tools so you don’t over-torque when using a crowsfoot. That’s the kind of data that keeps a swing motor from cracking its housing on the first start.

Track Assembly and Lower Structure

Track tension adjustment on a Solar 170LC-V isn’t a “feel” thing. The manual includes cleaning and inspection wear limits and tolerances for track shoes, links, front idler roller, lower roller, upper roller, and the track spring and adjusting cylinder. If you’ve ever had a track come off because the adjuster was packed with mud and you guessed the pressure, you’ll appreciate the step-by-step disassembly and reassembly procedures here.

OEM vs Aftermarket: Why Factory Specs Matter

Aftermarket manuals copy the table of contents and fill the rest with generic diagrams from other models. This one is the actual factory print from Daewoo. It covers the Internal Combustion Engine specifics for the Solar’s powertrain, including the drive coupling installation procedure with special tools listed. No “use a suitable puller.” They tell you which puller part number. That level of detail saves you a trip to the parts counter at 4:00 PM.

Hydraulic System Troubleshooting

The hydraulic troubleshooting section (S0702130) goes through pilot pressure, power mode valve, boom/swing priority valve, pressure up valve, and pump input power control. There’s a flow meter kit installation procedure with test steps. If your Solar 170LC-V is slow on the swing or the travel motor (TM24VA) won’t hold, you’ve got disassembly, wear limits, and reassembly sequences for each component. The accumulator charging procedure (S0703000) is separate—don’t skip it, or you’ll lose your pilot pressure.

Does This Manual Cover the Engine Performance Curves?

Yes. The spec section includes engine performance curves per KS-R1004 standard. That’s critical if you’re diagnosing a power loss or swapping injection pumps. You also get the general maintenance procedures for Manual Transmission components (if applicable to your machine), plus welding precautions and hydraulic system cleanliness procedures. Every torque value, every clearance, every R134a weight for the A/C system is in here.

Related Manuals for Daewoo Excavators

• Daewoo Solar 2001 Service Manual (130LC-V, 170LC-V, 220LC-V, 250LC-V, 220N-V)
• Daewoo Solar 130LC-V to 250LC-V 2001 Service Manual – OEM Shop Manual
• Daewoo SOLAR 010 1997 Workshop Manual – OEM Bus Repair Specs

Frequently Asked Questions

Will this manual help me rebuild the swing motor?

The swing motor section (S0707260) includes special tools, disassembly steps, cleaning and inspection with wear limits, and reassembly. Yes, it covers the full rebuild.

Does it include the A/C system specifications?

Yes – R134a weight, control panel diagnostics, refrigerant system repairs, and the circuit diagram are in section S0605010.

Can I use this manual if my machine has a different serial number?

This manual covers Serial Number 1001 and up for the Solar 170LC-V. If your machine is earlier, many procedures will still apply, but verify with your distributor for updates.

Where do I find the torque specs for the split flanges on the hydraulic lines?

Standard Torques section S0309000 includes a dedicated table for split flange torque values. Use the correct value – over-torquing splits the flange.

You’ve got a machine that needs real data, not guesses. Access the Factory Manual now and put the torque spec you need on your bench, not in your memory.