Description

Cub Cadet GT2544 2009 Parts Catalog

If you own a Cub Cadet GT2544 2009 Parts Catalog you already know that finding the right replacement part without a factory diagram is a headache. I’ve wasted afternoons cross-referencing part numbers from generic sites that turn out to be wrong. This 72-page OEM parts catalog from 2009 gives you the exact breakdowns Cub Cadet used on the assembly line. No guessing if that brake pedal shaft is 603-04313A or some aftermarket knockoff. You get the factory part numbers, quantities, and fastener specs.

Cub Cadet GT2544 2009 Parts Catalog: What the Diagrams Show

Open to page 1 and you see the battery, electrical components, and switches diagram laid out with reference numbers. This section lists the main wire harness (929-04158A), the key/module switch (925-04227B), the indicator/hour meter (925-04022B), the PTO switch (925-04175), and the interlock switch (925-3164A). Each of those components has a specific part number that Cub Cadet engineers assigned when the tractor was designed. If you need a new seat switch (925-04040), the catalog tells you the quantity (1) and whether it’s serviceable or part of a group. The fastener spec is also there: hex screws 1/4-20 x .75 GR5 with sems nuts (712-0271). That matters when you reassemble because using the wrong thread pitch can strip the plastic wire harness bracket. I’ve seen guys grab a 5/16 bolt because it ‘looked close’ and then wonder why the harness rattles. This catalog eliminates that. Page 1 alone gives you 22 line items for the electrical system, from the 25-amp fuse (725-3243) to the head light socket (925-1649).

Battery and Electrical Components Breakdown

That page 1 layout is straightforward. The diagram has reference numbers connected to a table with part numbers, descriptions, and quantities. For example, the indicator/hour meter is 925-04022B and the relay is 925-1648. The head light (925-0963) and socket (925-1649) are separate items — order them individually. The catalog also notes the 12V power receptacle (725-2003) and the key module (925-04227B) with two keys (925-2054A). Every piece is listed with its official Cub Cadet part number, which means you can go to a dealer or parts supplier and read them the number directly.

Brake and Control Pedals: Factory Part Numbers

Page 3 covers the brake and control pedals. You get the reverse pedal assembly (603-0412), brake shaft assembly (603-04313A), and forward/reverse shaft assembly (603-04314). The pedal pad for the forward foot control is 735-3048. The damper cylinder (727-04141) is .59 OD x 7.84 Lg — that’s a specific part, not a universal fit. Springs are listed with dimensions and part numbers: extension spring .38 OD x 2.1 (732-0418) and torsion spring (732-0756A). Having these numbers when you order saves a trip back to the parts counter.

Know Your Fastener Specs

This catalog includes fastener part numbers and sizes — hex cap screws, lock nuts, cotter pins. You need a 3/8-16 x 1.0 hex cap screw? That’s 710-0514. A hex flange lock nut 3/8-16 is 712-04065. The grade is specified: GR5 for most bolts. Never substitute a GR5 bolt with a GR2 and guess the torque. The parts catalog gives you the engineering choice, not a guess. The pin sizes are listed too — internal cotter pin 5/16 diameter x 1.12 (914-0104). When you’re reassembling the brake pedal linkage, that pin diameter is critical for safety.

Why Choose OEM Over Aftermarket?

I’ve seen aftermarket parts catalogs that list the wrong part number for a Cub Cadet GT2544 seat switch. The result: you get the switch, install it, and the machine still won’t start because the terminal configuration is different. This 72-page factory catalog was printed in 2009 by Cub Cadet. Those part numbers are verified against the actual production tractors. Trusting aftermarket documentation on principle is a mistake I’ve made myself. Stick with the source. For the automotive industry as a whole, OEM documentation is the standard — Automotive Industry Overview — and this catalog follows that.

Using the Parts Catalog with Your Service Manual

A parts catalog alone won’t tell you how to disassemble the transmission or set valve lash. You pair it with the factory service manual for torque values and procedures. But when you need to order a replacement interlock switch (925-3164A) or the head light harness (629-04142A), this catalog is what you pull up. It saves you from ordering the wrong part and waiting another week. Many online forums suggest aftermarket parts, but the factory specifications are the benchmark — Automotive Industry Overview — and this catalog is a primary source.

Does this manual include repair procedures?

No. This is a parts catalog, not a service manual. It lists every part, its part number, and quantity required. For repair steps, you need the Cub Cadet GT2544 service manual.

How do I find the part number for my GT2544 if I don’t know the name?

Open the catalog and browse the diagrams. Each diagram has reference numbers keyed to a parts list. Look at the illustration, find the part you see on your tractor, note the reference number, then read the part number from the table. If you still can’t find it, call Discount Cub Cadet Parts at 606-678-9623 — that number is printed right on page 1 of the catalog. They can help you cross-reference based on your tractor’s serial number. It’s the quickest way to verify you’re getting the right component the first time.

That’s the value of OEM documentation.

If you work on these tractors, having the factory parts catalog on your tablet or printed out cuts ordering errors to zero. Cub Cadet GT2544 Parts Catalog is the exact document you need. Pair it with Cub Cadet 21121C29025 Parts Catalog – 73 Pages of Factory Specs for other models, or Cub Cadet 984 Parts Catalog – 128 Pages of OEM Factory Parts Breakdowns for a larger machine. Click the button below to access the factory manual.