Description

Cub Cadet 364 Parts Catalog – 44″ Deck Assembly

If you’re tearing into a Cub Cadet 364 with the 44″ deck and you don’t have the factory parts breakdown in front of you, you’re working blind. I’ve seen too many guys grab a generic aftermarket diagram and end up with the wrong idler pulley or a belt that’s half an inch off. This Parts Catalog is what the dealer uses. 43 pages, original Cub Cadet print, not a third-party rehash. It lists every spring, bearing, bolt, and pulley with the exact part number and quantity. That matters when you’re ordering from a supplier and you need to know if a 712-3006 hex nut is a 1/4-20 or not. Page 2 shows the full deck assembly – 70 line items, including the spindle assembly (ref #52) and the high-lift blade option. Don’t guess. Get the factory data.

44″ Deck Assembly – Every Ref Number Explained

The core of this catalog is the 44″ deck breakdown. You get a table with ref #, part number, quantity, description, and whether it’s a service (S), purchase (P), or factory (F) item. For example, the spindle bolt (ref #37) is a 3/4-16 x 5 inch bolt – two options depending on your build. The belt (ref #7) is a 754-3091, and the idler assembly (ref #17) is 603-0743. If you’re replacing the blade spacer, you have a choice: 748-3101 (0.31″ thick) or 948-3020 (0.70″ thick). The manual tells you which one fits each application. That kind of detail saves a trip back to the parts counter.

Spindle Assembly & Bearing Specs

The spindle assembly (ref #52, part 918-3129) is a common failure point. The catalog lists the bearing (ref #6, 741-0524) with a 0.625″ ID and 1.574″ OD. Also the flange bearing (ref #13, 741-0338) at 3/4″ ID. You get the snap ring, spacer, pulley, and the grease fitting. If you’re rebuilding the spindle, the exploded view on page 3 shows how everything stacks. No guessing which washer goes where – the catalog shows flat washer 736-0290 (5/8″ ID) and 736-0179 (1/2″ ID). That’s the difference between a wobbling blade and a smooth cut.

Belts and Tensioning Parts

Belt routing can be a headache on these deck assemblies. The catalog includes the extension springs (ref #1, 732-0556 – .94″ OD x 7.57″ long) and torsion spring (ref #22, 732-3067). The idler arm assembly (ref #21, 603-0741) and retainer spring (ref #25, 748-3100) are all listed with part numbers. You also see the belt cover LH (ref #31) and RH (ref #66) – both part numbers given. If you need the mulching plug (ref #64, 731-3316), it’s there. This is the data you need when ordering after a belt failure.

3 Reasons to Choose OEM Documentation

Aftermarket parts catalogs often merge multiple model years into one drawing. That leads to wrong bolt lengths and missing spacers. This factory catalog is specific to the Cub Cadet 364 with the 44″ deck. Each part number is verified against Cub Cadet’s own inventory. The S/P/F column tells you if it’s a service part (S), purchase part (P), or factory-only (F). I’ve seen aftermarket diagrams skip that column entirely. You end up ordering a part that Cub Cadet doesn’t even sell separately. Stick with the original.

FAQ

Does this manual cover the 364 tractor chassis, or only the deck?

This is a parts catalog for the 44″ deck assembly only. It includes the spindle, belt, idler, and all hardware attached to the deck. If you need the tractor’s engine or transmission parts, you’ll want the full service manual.

Are torque specifications included in this catalog?

No. This is a parts catalog, not a service manual. Torque values are not listed. You need the separate Cub Cadet 364 service manual for bolt torque specs.

Can I use these part numbers for a different model?

Some parts may cross-reference to other models, but the assembly is specific to the 364. Always verify the part number against your machine’s serial number range.

How many pages and what format?

43 pages in PDF format. Original factory scan, not a reprint.

This catalog is the real deal. You can cross-reference the deck wheel (ref #59), the chute assembly (ref #60), and every fastener down to the button plug (ref #30). If you’re restoring a 364 or just replacing worn deck parts, having the factory part numbers in hand saves hours of cross-referencing. Access the Factory Manual and keep it in your shop tablet. You’ll thank yourself the first time you need to order a belt or a spindle bearing.

Related manuals: Cub Cadet 364 2001 Parts Catalog | Cub Cadet 364 44″ Deck Assembly Parts Manual | Cub Cadet Parts Manual Battery Holder Brakes

For context on how factory documentation improves repair accuracy, see Automotive Industry Overview and Automotive Industry Overview.